Repl. Cord & Clamp Set (48/49/54/55) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 52
Model: TCAG0115-SK16
Weight: 0.17kg
Pack Dim: 245.00mm x 70.00mm x 50.00mm
UPC: 6009515877491

Price:

R 105.57

Ex VAT: R 91.80

Available Options

Stockist

Tork Craft Repl. Cord & Clamp Set (48/49/54/55) Service Kit (TCAG0115-SK16)

At a Glance: Replacement power cord and clamp/strain relief set (parts 48, 49, 54 & 55) for the Tork Craft TCAG0115 angle grinder

A hard-working grinder cord takes knocks: it gets tugged, twisted, dragged over edges, and sometimes “mysteriously” develops intermittent power at the worst moment. If your TCAG0115 cuts out when the cord moves, shows insulation damage, or has a loose strain relief, it’s time for a proper replacement. The Tork Craft TCAG0115-SK16 Repl. Cord & Clamp Set Service Kit replaces the cord and the key clamping/strain relief components referenced as parts 48, 49, 54 and 55—helping restore safe cable support and dependable electrical supply to the tool.

Reliable power starts at the plug: renew the cord and strain relief components together

Designed for the Tork Craft TCAG0115 platform, this kit is ideal for workshop repairs and preventative maintenance. Proper strain relief matters—without it, internal terminals loosen and wires fatigue. Replace the cord and clamp set as intended and your grinder becomes far more trustworthy (and safer) to use.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
If the tool trips a breaker or shocks, stop using it immediately and have it inspected by a qualified technician.
During replacement, inspect the switch terminals and internal wiring for heat damage or looseness.
Ensure the cord is routed correctly and the clamp/strain relief is fitted snugly to prevent internal movement.

Pro Tip

Before closing the housing, gently pull the cord from the outside while watching the internal connections—there should be no movement at the terminals. That’s how you know the clamp is doing its job. Finish with a short no-load test run and check for stable power.

Features

Complete cord support kit: Replaces the power cord and the clamp/strain relief component group.
Parts reference match: Covers parts 48, 49, 54 and 55 as per the service diagram references.
Improves cable retention: Restores proper cord clamping to reduce internal wire fatigue and terminal stress.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0115 angle grinder.

Benefits

Safer operation: Replacing damaged cords reduces the risk of electric shock, short circuits and overheating.
Eliminates intermittent cut-outs: Fresh wiring and proper strain relief help stop “runs only when you wiggle the cord” problems.
Longer-lasting repair: Correct clamping protects internal connections and helps prevent repeat failures.

Safety

Wear eye protection when opening housings and working near springs and fasteners.
Disconnect power before opening the tool or fitting any electrical spare parts.
Damaged cords are a shock hazard — never tape over severe insulation damage; replace correctly.
Electrical repairs should be completed by a competent technician; incorrect wiring can cause electric shock or fire.
After repair, perform a no-load test run in a safe area and stop immediately if you smell burning, see arcing, or the tool behaves erratically.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK16
Product Type	Spare Part Service Kit
Component Group	Repl. Cord & Clamp Set
Parts Reference	48, 49, 54 & 55
Compatible Tool Model	TCAG0115