Gear & Spindle Compl. (6-19/21/28) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAG0230-SK03
Weight: 0.71kg
Pack Dim: 140.00mm x 90.00mm x 55.00mm
UPC: 6009515877538

Price:

R 515.20

Ex VAT: R 448.00

Available Options

Stockist

Tork Craft Gear & Spindle Compl. (6-19/21/28) Service Kit (TCAG0230-SK03)

At a Glance: Complete gear and spindle assembly kit (parts 6–19, 21 & 28) for the Tork Craft TCAG0230 angle grinder

The gearbox is where an angle grinder turns motor speed into usable torque — and the gear & spindle assembly is the heart of that conversion. When gears wear, bearings start complaining, or the spindle develops play, the grinder can become noisy, rough, and unreliable under load. The Tork Craft TCAG0230-SK03 Gear & Spindle Complete Service Kit replaces the main drivetrain component group referenced as parts 6 to 19, plus 21 and 28, helping restore correct gear mesh, alignment, and smooth spindle rotation so your TCAG0230 can get back to clean, controlled grinding and cutting.

Full drivetrain refresh for a tighter, smoother-running grinder

Designed for the Tork Craft TCAG0230 platform, this kit is ideal for workshop repairs where replacing individual gearbox parts is no longer practical. Replace the gear and spindle assembly as a matched set, re-grease correctly, and return the tool to dependable service.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
Gearbox rebuilds should include cleaning out old grease and debris, then applying appropriate gearbox grease during reassembly.
While the gearbox is open, inspect related parts such as guards, flange nuts, bearings, circlips and seals and replace if needed.

Pro Tip

Before final closure, rotate the gear train by hand to confirm smooth movement with no tight spots. After assembly, run the grinder no-load for 30–60 seconds and listen for an even, consistent sound before putting it under load.

Features

Complete drivetrain service kit: Replaces the primary gear and spindle component group used in the TCAG0230 assembly.
Parts reference match: Covers parts 6–19, 21 and 28 as per the service diagram references.
Restores proper engagement: Helps return correct gear mesh and spindle alignment for smoother operation.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.

Benefits

Smoother running: Helps reduce harsh vibration and rough gearbox noise caused by worn drivetrain components.
Improved control and accuracy: A stable spindle assembly supports cleaner cuts and more predictable grinding.
Extends tool life: A gearbox rebuild protects the motor and prevents knock-on wear to bearings and housings.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before opening the gearbox or fitting any spare parts.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Use only rated discs suitable for the grinder and never exceed the disc’s maximum RPM.
After repair, perform a no-load test run in a safe area and stop immediately if you hear grinding, rubbing or excessive vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0230-SK03
Product Type	Spare Part Service Kit
Component Group	Gear & Spindle Complete
Parts Reference	6–19, 21 & 28
Compatible Tool Model	TCAG0230