Gear Box & Needle Bearing (20/22/23) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 109
Model: TCAG0230-SK04
Weight: 0.54kg
Pack Dim: 125.00mm x 110.00mm x 110.00mm
UPC: 6009515877545

Price:

R 187.68

Ex VAT: R 163.20

Available Options

Stockist

Tork Craft Gear Box & Needle Bearing (20/22/23) Service Kit (TCAG0230-SK04)

At a Glance: Gearbox housing and needle bearing kit (parts 20, 22 & 23) for the Tork Craft TCAG0230 angle grinder

The gear box is the rugged front housing that supports the grinder’s drivetrain and keeps the gear train aligned under load. When the gearbox is damaged (impact, stripped threads, worn bearing seats) or the needle bearing area is no longer supporting the rotating parts correctly, the grinder can become rough, noisy and vibration-heavy. The Tork Craft TCAG0230-SK04 Gear Box & Needle Bearing Service Kit replaces the gearbox-related components referenced as parts 20, 22 and 23, helping restore correct support, alignment and smoother operation on your TCAG0230.

Restore solid gearbox support for cleaner, steadier grinding

Designed for the Tork Craft TCAG0230 platform, this kit is ideal during gearbox rebuilds and repairs where the housing and bearing support area needs replacement. Fit the correct parts, re-grease properly, and get your grinder back to controlled, dependable performance.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
During reassembly, clean out old grease and debris, then apply correct gearbox grease (avoid general-purpose grease for gear heads).
While the gear head is open, inspect related parts (gears, spindle lock mechanism, bearings, seals and circlips) and replace worn items together for best results.

Pro Tip

Before final tightening, rotate the gear train by hand. It should feel smooth with no binding. After assembly, run the grinder no-load for 30–60 seconds and listen for even, consistent sound before putting it back under heavy load.

Features

Gearbox support repair kit: Replaces the gearbox housing and needle bearing component group used in the TCAG0230 assembly.
Parts reference match: Covers parts 20, 22 and 23 as per the service diagram references.
Restores alignment: Helps keep the drivetrain true-running for improved stability under load.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.

Benefits

Smoother running: Correct bearing support and housing alignment helps reduce vibration and harsh noise.
Protects drivetrain parts: Stable support can reduce premature wear on gears, spindle components and bearings.
Extend tool life: A solid gearbox repair keeps a good grinder in service longer without full replacement.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before opening the gearbox or fitting any spare parts.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Use only rated discs suitable for the grinder and never exceed the disc’s maximum RPM.
After repair, perform a no-load test run in a safe area and stop immediately if you hear grinding, rubbing or excessive vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0230-SK04
Product Type	Spare Part Service Kit
Component Group	Gear Box & Needle Bearing
Parts Reference	20, 22 & 23
Compatible Tool Model	TCAG0230