Spare Nozzle Kit 1.4mm For Sg H827

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG H827-1
Weight: 0.11kg
Pack Dim: 150.00mm x 90.00mm x 38.00mm
UPC: 6009515809812

Price:

R 259.90

Ex VAT: R 226.00

Available Options

Stockist

AirCraft Spare Nozzle Kit 1.4mm SG-H827-1 For SG-H827

At a Glance: 1.4mm nozzle set for the SG-H827—great for strong, steady flow when your current needle/nozzle set is worn, blocked or damaged.

The AirCraft SG-H827-1 Spare Nozzle Kit 1.4mm is a replacement nozzle set for the AirCraft SG-H827 spray gun. The nozzle set is the precision trio that makes the gun behave: the needle, fluid nozzle and air cap regulate flow and atomise your coating into a controllable pattern. Once these parts wear or get scratched, or you’ve got dried material that won’t clear out, you’ll see spray problems like spitting, rough atomisation, uneven fan edges, and dripping because the needle can’t seal properly. A 1.4mm setup is commonly chosen when you want a little more flow for general spraying (coating dependent), while still keeping good control. Fit a fresh kit and your SG-H827 returns to smooth, predictable output.

More Flow, Same Control: the SG-H827-1 1.4mm Nozzle Set

A properly matched needle/nozzle set restores sealing and atomisation—two things that matter far more than most people realise until they go wrong. Match the Cat No. SG-H827-1 to ensure correct fitment for the SG-H827.

Extra Information

Compatibility: Spare nozzle kit for AirCraft SG-H827 spray gun.
When to replace: Persistent spray issues after cleaning, or visible wear/damage on needle/nozzle.
Paint prep matters: Strain coatings and mix correctly to reduce clogging and improve finish quality.
Careful fitting: Avoid over-tightening the nozzle and protect the needle tip from knocks.

Pro Tip

After fitting the new kit, do a quick test spray and adjust air pressure and fluid setting gradually. A 1.4mm setup can deliver more material—fine-tuning helps prevent runs and orange peel.

Features

Complete 1.4mm nozzle kit Replaces the key wear components controlling flow and spray pattern.
Precision spray components Needle/nozzle fit supports clean shut-off and consistent atomisation.
Designed for SG-H827 Model-specific spare nozzle kit for correct compatibility.
Workshop-ready service part Ideal for rebuilds, maintenance, or restoring a gun after damage/heavy use.

Benefits

Improves spray consistency: Helps eliminate spitting, patchy coverage and unstable fan edges.
Better shut-off: Fresh needle/nozzle contact helps reduce dripping and leaks.
Supports higher flow: 1.4mm can be a practical choice for general spraying and broader coverage.
Cost-effective maintenance: Replace wear parts instead of replacing the entire spray gun.

Safety

Spray in a well-ventilated area and wear suitable respiratory protection.
Wear eye protection and gloves when handling coatings and cleaning solvents.
Disconnect the air supply and release pressure before changing needle/nozzle/air cap parts.
Keep solvents and coatings away from open flames and heat sources.
Dispose of cleaning waste responsibly according to local regulations.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG-H827-1
Product Type	Spare Nozzle Kit (Needle/Nozzle/Air Cap Set)
Nozzle Size	1.4mm
Compatible With	AirCraft SG-H827 spray gun
Function	Controls coating flow, atomisation and spray pattern
Replacement Use	Direct replacement by part number
Typical Use	General spraying applications (coating dependent)

Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup

AirCraft Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup At a Glance; HVLP gravity feed spray gun with 1.4mm nozzle and 600cc plastic cup for smooth, c..

R 454.83

Ex VAT:R 395.50