Festool MFT/3 Conturo-AP Multifunction Table for KA 65

Extra Information

• The MFT/3 Conturo-AP is designed for the Festool CONTURO KA 65 edge bander.
• It allows the KA 65 to be used as a bench-mounted stationary machine.
• The table is useful for edging straight edges, curves and oblique edges.
• The swivel-mounted setup allows adjustment from 0 - 47°.
• For mitred edging, the guide rail adapter helps keep the edging parallel and prevents it from running off course.
• The table has a perforated top and foldaway legs for stable workshop use.
• The KA 65 edge bander is not listed here as part of the table item and should be purchased separately if not already owned.

Features

• Stationary mounting system: Holds the CONTURO KA 65 securely for bench-mounted edging work.
• Continuously adjustable angle: The edge bander can be adjusted from 0 - 47° for different edge-banding applications.
• Sliding guides: Help guide the workpiece safely and assist with the correct edging overhang.
• Additional roller: Expands the pressure zone and helps when edging more complex shapes.
• Adjustable guide rail adapter: Helps feed the panel parallel when edging mitres so that the edging does not run off course.
• Edge deflector: Keeps the introduced edge away from the immediate workpiece area for cleaner handling.
• Accessible start button: The KA 65 start button remains easy to reach while the machine is mounted in the table.
• Foldaway legs: The table can be set up for a comfortable 900 mm working height and folded away for storage or transport.

Benefits

• More controlled edging: The workpiece is guided past the mounted machine, making it easier to maintain steady movement and pressure.
• Better handling of small or narrow parts: Stationary operation is useful when the workpiece is difficult to clamp or guide by hand.
• Improved mitre edging: The adjustable tilt system supports inclined edging work from 0 - 47°.
• Useful for small batches: Ideal when several similar pieces need consistent edging results.
• Flexible edge-banding setup: Works for straight edges, curves, shaped elements and more complex components.
• Fast setup and removal: The KA 65 can be fitted or removed without tools, keeping workflow practical.
• Part of the Festool system: Works with the CONTURO KA 65 and expands it into a more complete edge-banding workstation.

Application

• Stationary use of the Festool CONTURO KA 65 edge bander
• Edge banding straight workpieces
• Edge banding curved and free-form components
• Gluing inclined edges from 0 - 47°
• Applying edging to mitred workpieces
• Small-batch edge-banding work
• Working with narrow or smaller parts that are difficult to clamp
• Workshop-based furniture, cabinetry and board-processing applications

Safety

• Read the operating instructions for both the MFT/3 Conturo-AP and the CONTURO KA 65 before use.
• Ensure the table is set up on a firm, level surface before mounting the edge bander.
• Check that the KA 65 is securely fixed in the adapter plate before switching it on.
• Keep hands clear of the adhesive outlet, pressure area and moving workpiece path during operation.
• Be careful when working with hot adhesive, as melted glue can cause burns.
• Wear suitable eye protection and workwear when edging and finishing panels.
• Use safe hand positioning when guiding small or narrow workpieces past the mounted machine.
• Do not force the workpiece; feed it smoothly and evenly past the edge bander.
• Allow the machine and adhesive system to cool down before cleaning or making adjustments near heated areas.
• Disconnect the edge bander from the power supply before mounting, removing or adjusting it in the table.
• Keep the table surface, guides and pressure areas clean for safe and accurate workpiece guidance.
• Use only suitable Festool accessories and follow the KA 65 setup instructions for stationary operation.

Specifications

In the box:

• Festool MFT/3 Conturo-AP Multifunction Table
• AP-KA 65 adapter plate
• MFT 3-QT cross brace