Menu
Your Cart

Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m

Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m
Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m
Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m
Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m
Festool FS-SP 5000/T Transparent Guide Rail Splinterguard Strip, 5 m
  • Brand: FESTOOL
  • Model: FES495209
  • Weight: 0.25kg
  • Dim: 215 mm x 185 mm x 30 mm
  • UPC: 4014549093061
Price:
R 1,090.78
Ex VAT: R 948.50

Available Options

Festool FS-SP 5000/T Transparent Splinterguard Strip

At a Glance: 5000 mm replacement strip | Transparent | Self-adhesive backing | Cut to the required length | For FS, FS/2, FS/2 KP and FSK guide rails

Restore clean edge support and an accurate cutting reference to your Festool guide rail with the FS-SP 5000/T splinterguard. This transparent replacement strip helps reduce tear-out by supporting the material directly beside the saw blade. Once fitted and trimmed to your saw, its edge indicates the cutting line, making rail positioning straightforward. The 5 m length can be cut to suit the required rail length, providing a practical replacement for worn, damaged or incorrectly matched splinterguard strips.

Edge protection and cutting reference in one strip

The flexible lip presses against the workpiece beside the cut, helping hold surface fibres down as the blade passes. Its initial trimming cut establishes the reference edge for the particular saw and blade being used.

Product Highlights

  • Reduced splintering: Supports the material at the cutting edge to help minimise tear-out.
  • Accurate rail positioning: The trimmed edge provides a reference for alignment with your marked cutting line.
  • Transparent construction: Improves visibility when positioning the rail.
  • Self-adhesive fitting: Replacement strip attaches to the rail’s prepared bonding surface.
  • Adaptable length: Supplied in a 5000 mm length that can be cut to suit.

Product Compatibility

  • Festool FS: Suitable replacement splinterguard for compatible original FS guide rails.
  • Festool FS/2: Compatible with the FS/2 guide rail system.
  • Festool FS/2 KP: Included in Festool’s compatibility listing.
  • Festool FSK: Suitable for compatible FSK cross-cutting guide rails, cut to the required length.

Initial Trimming Is Required

After installation, trim the splinterguard using the intended saw and blade, following their operating instructions. Check its alignment whenever you change saws or blade cutting widths, and replace the strip when its edge no longer matches the cut.

Features

  • Flexible cutting-edge lip: Provides support immediately beside the blade.
  • Clear appearance: Helps keep layout marks visible during positioning.
  • Adhesive backing: Holds the replacement strip along the guide rail.
  • Renewable wear component: Replaces an existing strip as its condition deteriorates.

Benefits

  • Cleaner preparation: Helps reduce edge damage during suitable guided cutting operations.
  • Convenient setup: Position the trimmed reference edge directly against the marked line.
  • Maintained rail performance: Renew the working edge while retaining the guide rail.

Application

  • Replacing worn, damaged or nicked guide rail splinterguards.
  • Restoring a cutting reference that no longer matches the saw blade.
  • Reducing tear-out during cuts with and across the grain.
  • Supporting clean straight and angled cuts with the appropriate saw and rail setup.
  • Maintaining guide rails used for furniture, joinery and panel preparation.

Extra Information

  • Supplied length: 5000 mm equals 5 m. Measure the rail before cutting the replacement strip.
  • Bonding surface: Remove old adhesive residue and debris before fitting the new strip.
  • Condition checks: Inspect the working edge for gaps, wear and damage that could affect support or alignment.
  • Cut quality: Blade selection, blade condition, workpiece support and rail adjustment also influence the finished edge.

Pro Tips

  • Fit the strip without stretching it along the rail.
  • Use a suitable sacrificial support when making the initial trimming cut.
  • Make a test cut after changing the saw or blade to confirm the reference edge.
  • Protect the splinterguard edge when transporting and storing the rail.

How to Replace the Splinterguard

  • Disconnect the saw from its power source and remove it from the guide rail.
  • Peel the worn splinterguard away from the underside of the rail.
  • Remove residual adhesive and debris, leaving the bonding surface clean and dry.
  • Measure and cut the replacement strip to suit the rail.
  • Remove the backing and position the strip against the rail’s alignment rib without stretching it.
  • Press firmly along its full length to secure the adhesive bond.
  • Support and secure the rail appropriately, then perform the initial trimming cut according to the saw and rail instructions.
  • Inspect the trimmed edge and confirm alignment on a test piece before cutting finished components.

Safety

  • Disconnect the saw before fitting the strip or making setup adjustments.
  • Use suitable eye, hearing and respiratory protection during the trimming cut and subsequent sawing.
  • Support the workpiece and rail securely, with clearance beneath the blade.
  • Keep hands clear of the cutting path and follow the saw and guide rail instructions.
  • Take care when cutting the replacement strip to length.

Specifications

Description Spec
BrandFestool
Cat No.FES495209
Manufacturer Part Number495209
ModelFS-SP 5000/T
Product TypeReplacement guide rail splinterguard strip
Length5000 mm / 5 m
AppearanceTransparent
AttachmentSelf-adhesive backing
Rail CompatibilityFS, FS/2, FS/2 KP and FSK
Length AdjustmentCut to suit the guide rail
Initial SetupTrim to match the intended saw and blade
Quantity1 strip

Scope of Delivery:

  • 1 × Festool FS-SP 5000/T transparent, self-adhesive splinterguard strip, 5000 mm long.

Replacement strip only: Guide rail, saw, blade and workpiece clamps are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy