Menu
Your Cart

Festool ZOBO 35 mm CENTROTEC Forstner Drill Bit FB D 35 CE-Zobo

Festool ZOBO 35 mm CENTROTEC Forstner Drill Bit FB D 35 CE-Zobo
Festool ZOBO 35 mm CENTROTEC Forstner Drill Bit FB D 35 CE-Zobo
  • Brand: FESTOOL
  • Model: FES496476
  • Weight: 0.13kg
  • Dim: 20 mm x 7.6 mm x 4.6 mm
  • UPC: 4014549122495
Price:
R 1,790.55
Ex VAT: R 1,557.00

Available Options

Festool ZOBO 35 mm Forstner Drill Bit FB D 35 CE-Zobo

At a Glance: 35 mm drilling diameter | CENTROTEC fitting | ZOBO system | Replaceable centre point | Supplied singly

Prepare accurately positioned holes and recesses in timber with the Festool FB D 35 CE-Zobo Forstner drill bit. This 35 mm bit combines the convenience of the CENTROTEC system with a replaceable centre point, making it a practical accessory for furniture making, cabinet work and interior joinery. Its Forstner cutting geometry is suited to producing circular holes and substantially flat-bottomed recesses, while the centre point helps locate the bit on your marked drilling position. The 35 mm diameter is useful for hardware installation, including hinge-cup recesses where the fitting specification requires this size. Supplied as one individual bit, it is a convenient addition or replacement within a compatible ZOBO drilling setup.

What Is a Forstner Drill Bit?

A Forstner bit cuts around the circumference of a hole while removing material from the centre. It is commonly used for accurately sized timber bores and blind recesses with a substantially flat base. The centre point normally leaves a small indentation below the main recess floor, which must be considered when drilling thin material.

Product Highlights

  • 35 mm diameter: Produces holes and recesses for applications requiring this nominal size.
  • CENTROTEC fitting: Integrates with a compatible Festool CENTROTEC tool chuck.
  • Replaceable centre point: Provides a serviceable locating component within the ZOBO system.
  • Controlled positioning: The centre point helps establish the drilling location before the main cutting edges engage.
  • Forstner geometry: Suitable for circular bores and substantially flat-bottomed timber recesses.
  • Individual-bit supply: Add the required diameter to your drilling accessories without purchasing a complete set.

Product Compatibility

  • Festool CENTROTEC tool chuck: For use with a compatible CENTROTEC-equipped drill setup.
  • ZOBO Forstner drilling system: This bit belongs to the FB D CE-Zobo accessory range.
  • ZOBO replacement centre components: Select replacement parts specifically intended for the original ZOBO CENTROTEC Forstner bits.
  • 35 mm hardware recesses: Suitable where the hardware manufacturer specifies a 35 mm bore and the required depth can be achieved safely.

Check the Fitting and Required Depth

Confirm CENTROTEC compatibility before ordering. For hinge cups and other hardware, follow the fitting manufacturer's diameter, depth and positioning instructions. Allow for the centre point projecting beyond the main cutting edges when checking the remaining material thickness.

Features

  • 35 mm cutting diameter: A useful size for furniture hardware and general woodworking recesses.
  • Forstner-style cutting head: Produces a circular bore with a substantially flat recess floor.
  • Replaceable centre point: A defining feature of the ZOBO system.
  • CENTROTEC interface: Designed for use in the corresponding Festool tool-holding system.
  • Single-bit packaging: Supplied individually in a self-service display pack.

Benefits

  • Accurate layout: The centre point helps position the bit on a marked hole centre.
  • Practical hardware preparation: Creates recesses for compatible 35 mm fittings.
  • Convenient accessory changes: Fits into an existing compatible CENTROTEC drilling workflow.
  • Serviceable centring arrangement: Compatible replacement ZOBO centre components can be selected when required.
  • Flexible workshop supply: Purchase the individual diameter needed for the task.

Application

  • Drilling 35 mm holes and blind recesses in suitable timber.
  • Preparing concealed hinge-cup recesses where a 35 mm diameter is specified.
  • Furniture manufacture and assembly.
  • Cabinet and interior joinery work.
  • Recessing compatible furniture hardware.
  • Replacement or expansion of an existing ZOBO CENTROTEC Forstner bit collection.

Extra Information

  • Manufacturer article number: 496476.
  • Product code: FES496476.
  • Model designation: FB D 35 CE-Zobo.
  • Drilling diameter: 35 mm.
  • System: ZOBO CENTROTEC Forstner drilling accessories.
  • Pack quantity: One drill bit.

Blind Holes and Through Holes

A blind hole stops within the workpiece, so depth control is essential. For through holes, a firmly clamped sacrificial backing board can support the exit surface and help reduce breakout.

Centre Points Are System-Specific

Use replacement components intended for the original ZOBO Forstner system. Confirm the replacement part against article 496476 rather than selecting it by diameter or appearance alone.

Plan Around the Centre Point

The main recess floor and the deepest point of the centre indentation are different depths. This matters when boring hinge cups into thin doors or creating recesses close to a visible rear surface.

Pro Tips

  • Test the diameter and drilling depth on a matching offcut before machining a finished component.
  • Mark the hole centre clearly and support the drill square to the workpiece.
  • Clamp the work securely so it cannot rotate or lift during drilling.
  • Use an appropriate speed and steady feed for the timber and bit diameter.
  • Clear chips regularly, particularly when making deeper recesses.
  • Check hinge depth and edge distance against the hardware instructions before drilling a cabinet door.

How to Use

  • Confirm that a 35 mm bore is appropriate for the application and that the workpiece has sufficient thickness.
  • Mark the hole centre and establish the required depth, allowing for the centre point.
  • Switch off and isolate the drill before fitting the bit.
  • Insert the bit into the compatible CENTROTEC tool chuck and check that it is securely locked.
  • Clamp the workpiece and position the centre point on the marked location.
  • Select an appropriate drilling speed and drill with controlled pressure, keeping the bit aligned with the intended bore.
  • Withdraw the bit as needed to clear chips, allowing rotation to stop before clearing material by hand.
  • Stop at the required depth, withdraw the bit and inspect the recess before fitting the hardware.

Safety

  • Wear suitable eye protection and use hearing and dust protection appropriate to the drilling task.
  • Secure the workpiece with suitable clamps before drilling.
  • Check that the bit and centre point are securely fitted and undamaged.
  • Use rotary drilling mode with percussion or hammer action switched off.
  • Keep hands, loose clothing and jewellery clear of rotating parts.
  • Stop the drill before clearing chips or inspecting the cutting edges.
  • Allow the bit to cool before handling it and follow the drill manufacturer's operating instructions.

Specifications

Description Spec
BrandFestool
Cat No.496476
Product CodeFES496476
Model DesignationFB D 35 CE-Zobo
Product TypeForstner drill bit
Drilling Diameter35 mm
Accessory SystemZOBO
Tool InterfaceCENTROTEC
Centring FeatureReplaceable centre point
Primary ApplicationWoodworking holes and recesses
Pack Quantity1 drill bit
PackagingSelf-service display pack

Scope of Delivery:

  • 1 x Festool FB D 35 CE-Zobo 35 mm Forstner drill bit with centre point.
Important note:

Drill, CENTROTEC tool chuck, replacement centre components, drilling guides and depth-control accessories are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy