Menu
Your Cart

Festool CENTROTEC Forstner Drill Bit FB D 30 CE – 30 mm

Festool CENTROTEC Forstner Drill Bit FB D 30 CE – 30 mm
Festool CENTROTEC Forstner Drill Bit FB D 30 CE – 30 mm
  • Brand: FESTOOL
  • Model: FES205755
  • Weight: 0.09kg
  • Dim: 135 mm x 40 mm x 40 mm
  • UPC: 4014549383025
Price:
R 1,686.48
Ex VAT: R 1,466.50

Available Options

Festool CENTROTEC Forstner Drill Bit FB D 30 CE – 30 mm

At a Glance: 30 mm diameter | CENTROTEC connection | Replaceable centring point | Ball bearing steel | Resharpenable up to 5 times

Create precise recesses and clean-sided holes in timber with the Festool FB D 30 CE Forstner drill bit. Designed for softwood and hardwood, this 30 mm bit is useful for furniture manufacture, carpentry and assembly work where accurate positioning and a controlled hole depth matter. Its replaceable centring point helps locate the cut, while the CENTROTEC connection allows direct insertion and locking in a compatible tool chuck. Made from high-quality ball bearing steel, the bit can be resharpened up to five times to extend its useful working life.

Controlled boring for woodworking details

A Forstner bit cuts a circular hole with a substantially flat bottom around the centring-point impression. This makes it useful for blind recesses where the hole must stop within the workpiece rather than pass completely through it.

Product Highlights

  • 30 mm cutting diameter: For holes and recesses requiring this size.
  • CENTROTEC connection: Quick insertion and secure locking in the compatible chuck.
  • Replaceable centring point: Supports accurate positioning and maintenance.
  • Durable steel construction: Manufactured from high-quality ball bearing steel.
  • Resharpenable design: Can be sharpened up to five times, subject to condition.

Product Compatibility

  • Festool cordless drills: Models with FastFix tool reception and a WH-CE CENTROTEC tool chuck.
  • Festool cordless percussion drills: With the same compatible connection arrangement; use rotary drilling mode with percussion switched off.

Connection and Capacity Check

Confirm that the machine has the required CENTROTEC setup and is rated for a 30 mm wood-boring operation. Select the operating settings according to the drill and bit instructions.

Features

  • Forstner cutting geometry: Designed for accurate holes and clean blind recesses.
  • Exchangeable centring point: A replaceable component at the centre of the bit.
  • Serviceable cutting edges: Suitable for professional resharpening.

Benefits

  • Accurate layout: Position the centring point on a clearly marked hole location.
  • Convenient tool changes: Use the CENTROTEC system when changing between compatible drilling and driving accessories.
  • Controlled recess depth: Combine careful depth control with a test cut to avoid drilling through the workpiece.
  • Extended usability: Maintain the bit rather than replacing it at the first sign of dullness.

Application

  • Blind holes and recesses in softwood and hardwood.
  • Boring out knot locations.
  • Angled holes with a suitable guided setup.
  • Furniture manufacture, carpentry and assembly work.
  • Peephole installation where the fitting specifically requires a 30 mm opening.

Extra Information

  • Product designation: FB D 30 CE.
  • Diameter selection: Check the required hole size against the hardware or project drawing.
  • Supplied format: One individual drill bit.

Allow for the Centring Point

When drilling a blind recess, account for the centring point projecting beyond the main cutting area. Leave sufficient material beneath the recess so the point does not break through the opposite face.

Resharpening and Maintenance

Correct sharpening must preserve the cutting geometry. Have the bit assessed by a competent sharpening service, particularly if it has chipped edges or has already been sharpened several times.

Chip Clearance

For deeper holes, withdraw periodically to clear chips according to the operating instructions. Packed chips and excessive pressure can increase heat and reduce cutting quality.

Pro Tips

  • Make a trial hole in an offcut of the same timber before drilling the finished component.
  • Clamp the workpiece securely rather than holding it by hand.
  • Use a suitable guide when hole angle or alignment is critical.
  • Support the underside with sacrificial material when drilling through.
  • Stop if the bit burns the timber or requires excessive force; inspect its condition and the selected settings.

How to Use

  • Remove the battery or otherwise isolate the drill before fitting the bit.
  • Inspect the cutting edges and centring point, then insert and lock the bit in the compatible CENTROTEC chuck.
  • Mark the hole position, check the required depth and clamp the workpiece securely.
  • Select rotary drilling mode and appropriate speed settings within the equipment limits.
  • Position the centring point on the mark and begin with controlled feed pressure.
  • Maintain alignment and clear chips periodically as required.
  • Stop at the required depth and wait for rotation to cease before inspecting the hole or handling the bit.

Safety

  • Isolate the drill before fitting, removing or servicing the bit.
  • Wear suitable eye, hearing and respiratory protection for the operation and material.
  • Secure the workpiece and keep hands, loose clothing and hair clear of rotating parts.
  • Use rotary drilling mode only; do not use hammer or percussion action.
  • Do not use a damaged bit or exceed the machine's drilling capacity.
  • Allow the bit to cool before handling and never clear chips with your fingers while it is rotating.

Specifications

DescriptionSpec
BrandFestool
Cat No.FES205755
Manufacturer Part Number205755
ModelFB D 30 CE
Product TypeForstner drill bit
Cutting Diameter30 mm
MaterialHigh-quality ball bearing steel
Tool ConnectionCENTROTEC
Centring PointReplaceable
ResharpeningUp to 5 times, subject to condition and correct sharpening
Suitable MaterialsSoftwood and hardwood
Compatible Tool SetupFestool cordless drill or cordless percussion drill with FastFix reception and WH-CE CENTROTEC chuck

Scope of Delivery:

  • 1 × Festool Forstner drill bit FB D 30 CE, including replaceable centring point.
Contents Note: Drill, CENTROTEC chuck, guides and additional replacement parts are supplied separately.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy