Menu
Your Cart

Festool Solid Carbide Spiral Groove Cutter HW Spi S8 D4/10 – 4 mm Diameter, 8 mm Shank

Festool Solid Carbide Spiral Groove Cutter HW Spi S8 D4/10 – 4 mm Diameter, 8 mm Shank
Festool Solid Carbide Spiral Groove Cutter HW Spi S8 D4/10 – 4 mm Diameter, 8 mm Shank
  • Brand: FESTOOL
  • Model: FES490977
  • Weight: 0.05kg
  • Dim: 102 mm x 53 mm x 53 mm
  • UPC: 4014549000779
Price:
R 2,024.00
Ex VAT: R 1,760.00

Available Options

Festool Spiral Groove Cutter HW Spi S8 D4/10

At a Glance: 4 mm cutting diameter, 10 mm cutting length and 8 mm shank. Solid carbide construction with an upward chip-clearing spiral for narrow grooves and template-guided routing.

Bring precision to narrow routing work with the Festool HW Spi S8 D4/10 spiral groove cutter. Designed for hardwood and wood-based panel applications, this compact cutter is suited to creating fine grooves and routing openings with a suitable template setup. Its 4 mm cutting diameter makes it a useful choice for detailed furniture, cabinetry and joinery work where a wider cutter would remove too much material.

The spiral cutting action helps carry chips upwards towards extraction. Choose a suitable guide, support the workpiece securely and take controlled passes to produce a consistent groove. For small-diameter routing, careful setup and a steady feed are particularly important.

Spiral cutting geometry for detailed routing

A spiral cutter engages the material progressively along its cutting edge. This geometry provides a drawing cut that helps reduce cutting pressure while clearing chips from the groove.

Product Highlights

  • Narrow cutting profile: Suitable for fine grooves and detailed routing layouts.
  • Solid carbide construction: Designed for demanding woodworking applications.
  • Upward chip transport: Helps move waste out of the cut towards the extraction point.
  • Spiral cutting action: Supports smooth, controlled routing.
  • 8 mm shank: Fits an appropriate 8 mm router collet.

Product Compatibility

  • Festool compact routers: OF 900, OF 1000, OF 1010 and OF 1010 R.
  • Festool larger routers: OF 1400, OF 2000 and OF 2200.
  • Collet requirement: Fit the router with the correct 8 mm collet.
  • Guided routing: Use an appropriate fence, guide or template arrangement for the intended cut.

Plan for the Template Offset

When routing with a guide bush, allow for the difference between the bush diameter and cutter diameter. Make a trial cut to confirm the finished dimensions before machining the final workpiece.

Features

  • Right-hand spiral: Directs chips upwards from the cutting area.
  • Compact cutting section: Suits shallow, narrow groove work.
  • Straight cylindrical shank: Secures in the correctly sized router collet.

Benefits

  • Greater layout flexibility: Create narrow channels without widening them unnecessarily.
  • Repeatable results: A well-secured guide helps reproduce groove positions across matching components.
  • Better process control: Shallow passes make it easier to monitor the cut and adjust the feed.

Application

  • Routing narrow grooves in suitable hardwood.
  • Machining channels in wood-based panels.
  • Template-guided openings within the cutter's working reach.
  • Detailed furniture and cabinetry components.

Extra Information

  • Product identification: Festool article 490977; Vermont Sales code FES490977.
  • Cutting length: Describes the cutting section; it is not a recommended depth for a single pass.
  • Routing setup: Check cutter clearance, guide position and workpiece support before switching on.

Protecting the Workpiece Surface

Test veneered or laminated material on an offcut first. Check the top edge of the groove and adjust the cutting sequence, feed and support to suit the surface.

Keeping the Cutter Working Well

Inspect the cutting edges for damage and remove resin deposits with a suitable cutter cleaner. Keep the shank and collet clean so the cutter can be clamped correctly.

Pro Tips

  • Use several shallow passes instead of forcing the cutter through a deep cut.
  • Set stops when groove length must be repeated accurately.
  • Keep the feed steady and avoid dwelling in one position.
  • Check groove width and depth on a matching offcut before starting the finished component.

How to Use

  • Disconnect the router from its power source.
  • Inspect the cutter and fit it in the correct 8 mm collet, following the router and cutter instructions.
  • Secure the workpiece and install the required guide or template.
  • Set a suitable pass depth and connect dust extraction.
  • Select the operating speed according to the tool instructions and make a trial cut.
  • Route with controlled feed, increasing depth in stages as required.
  • Wait for the cutter to stop completely before setting the router down or making adjustments.

Safety

  • Disconnect the router before fitting the cutter or adjusting the setup.
  • Wear suitable eye, hearing and dust protection.
  • Secure the workpiece and keep hands clear of the cutting area.
  • Follow the cutter's marked speed limit and the router operating instructions.
  • Do not use a chipped, bent or damaged cutter.
  • Use controlled cutting depths and avoid excessive feed pressure.

Specifications

Description Spec
BrandFestool
Product DescriptionSolid carbide spiral groove cutter
Cat No.FES490977
Festool Article Number490977
ModelHW Spi S8 D4/10
Cutting Diameter (D)4 mm
Cutting Length (NL)10 mm
Overall Length (GL)45 mm
Shank Diameter (s)8 mm
Cutting MaterialSolid carbide (HW)
Spiral DirectionRight-hand twist; upward chip transport
Primary MaterialsHardwood and wood-based panel materials
Compatible Festool RoutersOF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000 and OF 2200, with an appropriate 8 mm collet
Quantity1 cutter

Scope of Delivery:

  • 1 × Festool spiral groove cutter HW Spi S8 D4/10.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy