Menu
Your Cart

Festool HS Spi S8 D6/16 Spiral Groove Cutter 6 mm with 8 mm Shank

Festool HS Spi S8 D6/16 Spiral Groove Cutter 6 mm with 8 mm Shank
Festool HS Spi S8 D6/16 Spiral Groove Cutter 6 mm with 8 mm Shank
  • Brand: FESTOOL
  • Model: FES490944
  • Weight: 0.05kg
  • Dim: 102 mm x 53 mm x 53 mm
  • UPC: 4014549000366
Price:
R 1,033.85
Ex VAT: R 899.00

Available Options

Festool Spiral Groove Cutter HS Spi S8 D6/16

At a Glance: 6 mm high-speed steel spiral groove cutter with an 8 mm shank and 50 mm overall length. Particularly suited to softwood routing and specified Festool VS 600 jointing applications.

Produce accurately positioned grooves and joints in softwood with the Festool HS spiral groove cutter, article 490944. Its helical cutting geometry draws chips upwards from the cut, helping clear the groove and supporting effective extraction. The precision cutting diameter makes it useful for the specified Festool VS 600 jointing procedures, where the cutter, template and copying ring work together to establish the finished fit.

Manufactured from high-speed steel, this cutter is particularly suited to softwood applications. It can be used for suitable grooving, rebating, elongated-hole cutting and guided copy routing, with the correct machine setup. The 8 mm shank provides conventional collet mounting in a compatible router.

HS Spiral Cutting for Softwood

HS identifies high-speed steel. The spiral geometry progressively engages the material and lifts chips towards the top of the groove, helping keep waste moving away from the cutting area.

Product Highlights

  • 6 mm cutting diameter: For narrow grooves and the specified precision jointing operations.
  • High-speed steel construction: Particularly suited to softwood.
  • Upward chip clearance: Spiral geometry draws chips out of the groove towards the extraction area.
  • 8 mm shank: Requires a compatible router with the correct 8 mm collet.
  • VS 600 jointing applications: Specified for FZ 6 and SZO 14 machining procedures.
  • End-cutting capability: Supports suitable plunge and elongated-hole routing operations.

Product Compatibility

  • Router mounting: Compatible router with an 8 mm collet, suitable cutter clearance and the required guidance.
  • Festool router examples: OF 1010, OF 1400 and OF 2200 with the appropriate collet and setup.
  • Festool VS 600 FZ 6: For the prescribed finger-joint procedure using the correct template and copying ring.
  • Festool VS 600 SZO 14: For the specified straight-cutting operation within the open-dovetail machining sequence.
  • Primary material: Softwood.

Features

  • HS cutting material: High-speed steel for the intended softwood applications.
  • Spiral flute geometry: Provides upward chip movement.
  • Precision cutting diameter: Intended for accurate fit in the specified jointing system.
  • End-cutting design: Suitable for prescribed plunging operations.
  • 50 mm overall length: Compact cutter format with an 8 mm shank.

Benefits

  • Clear the cutting area: Upward chip movement helps reduce waste accumulation in the groove.
  • Support repeatable joints: Use the controlled cutter diameter with the correct template setup.
  • Route smoothly in softwood: Cutting material and geometry suit the intended application.
  • Perform several routing tasks: Use appropriate guidance for grooves, rebates, slots and copying work.
  • Work within a coordinated system: Combine with the prescribed VS 600 accessories for joint preparation.

Application

  • Grooving suitable softwood components.
  • VS 600 FZ 6 finger-joint machining.
  • The prescribed straight-cutting stage of VS 600 SZO 14 open-dovetail joints.
  • Rebating with suitable router guidance.
  • Elongated-hole cutting and suitable plunge routing.
  • Copy routing with an appropriate template and copying ring.

Extra Information

  • Vermont Sales product code: FES490944.
  • Festool article number: 490944.
  • Established designation: HS Spi S8 D6/16.
  • Current international page designation: HS Spi S8 D6/21.
  • Guidance requirement: Use a suitable fence, rail, template or other approved guiding arrangement.

Jointing Cutter Selection

This is a cylindrical spiral groove cutter. Its role in an open-dovetail procedure does not make it a dovetail-profile cutter. Follow the jointing system instructions for the complete tooling sequence.

Cutting Length and Pass Depth

The cutting length describes the usable cutting section, not a recommended single-pass depth. Check the actual cutter and choose suitable depth increments for the material and machine.

Upcut Action and Surface Finish

Upward chip movement can lift fibres at the top edge of a cut. Test on matching scrap and assess the finish before machining visible components.

Pro Tips

  • Make a trial joint to verify fit before cutting finished parts.
  • Use progressive depth settings for demanding cuts.
  • Keep the cutter and collet clean for secure mounting.
  • Maintain effective extraction rather than forcing the cutter through accumulated chips.
  • Check the cutting edge if burning, vibration or increased resistance develops.

How to Use

  • Disconnect the router from power before fitting or adjusting the cutter.
  • Inspect the cutter, confirm its usable cutting length and secure the shank in the correct 8 mm collet.
  • Install the required guidance and clamp the workpiece securely.
  • For VS 600 work, follow the specific FZ 6 or SZO 14 setup instructions.
  • Set the operating speed and initial cutting depth within the cutter and router requirements.
  • Connect suitable dust extraction and make a trial cut on matching scrap.
  • Route with controlled feed and suitable depth increments, keeping the router supported.
  • Allow the cutter to stop completely before checking the work or adjusting the setup.

Safety

  • Follow the cutter, router and jointing-system operating instructions.
  • Disconnect power before changing the cutter or adjusting the setup.
  • Wear appropriate eye, hearing and respiratory protection and use suitable extraction.
  • Observe the maximum speed marked on the cutter and the machine’s operating limits.
  • Use the correct 8 mm collet; do not substitute a 1/4-inch collet.
  • Secure the workpiece against movement, including the lifting action of the upcut geometry.
  • Keep hands clear and check the material for nails, screws and other foreign objects.
  • Do not use a damaged cutter or exceed its usable cutting section.

Specifications

Description Spec
BrandFestool
Product Description:Spiral groove router cutter
Cat No.FES490944
Festool Article Number490944
Established Model DesignationHS Spi S8 D6/16
Current International Page DesignationHS Spi S8 D6/21
Cutting MaterialHigh-speed steel (HS)
Cutting Diameter (D)6 mm
Cutting Length (NL)16 mm in established catalogues; current international page lists 21 mm. Confirm supplied cutter.
Overall Length (GL)50 mm
Shank Diameter (s)8 mm
Cutting GeometrySpiral with end-cutting capability
Chip EvacuationUpward
Specified Jointing ApplicationsVS 600 FZ 6 and SZO 14 procedures
Primary Material ApplicationSoftwood
Pack Quantity1 cutter

Scope of Delivery:

  • 1 × Festool HS spiral groove cutter, article 490944.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy