Menu
Your Cart

Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack

Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack
Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack
Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack
Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack
Festool Screw Clamps FSZ 300 300 mm for Guide Rails and MFT Tables 2 Pack
  • Brand: FESTOOL
  • Model: FES489571
  • Weight: 0.92kg
  • Dim: 415 mm x 137 mm x 36 mm
  • UPC: 4014549105054
Price:
R 2,209.73
Ex VAT: R 1,921.50

Available Options

Festool Screw Clamps FSZ 300 – 300 mm Clamping Capacity, 2 Pack

At a Glance: 300 mm maximum clamping width | Solid steel construction | Wooden screw handles | Protective pressure caps | For FS/2, FS/2-KP, FSK and MFT systems | Pack of 2.

Secure your guide rail or workpiece with confidence using Festool FSZ 300 screw clamps. Designed to integrate with the Festool guide rail and multifunction table systems, these clamps provide a dependable hold for cutting, routing, sanding and other supported workshop operations. Their specially shaped heads fit the compatible clamping channels, allowing guide rails to be secured from underneath while keeping the working area above the rail clear.

Each clamp offers a maximum clamping width of 300 mm, providing useful reach when securing thicker workpieces or clamping across a workpiece and supporting surface. Solid steel construction delivers durability, while the ergonomically shaped wooden handle allows controlled tightening of the threaded spindle. A soft protective cap on the pressure pad helps grip the contact surface while reducing the risk of marking it. Supplied as a pair, the clamps provide two fastening points for a practical guide rail or workholding setup.

FSZ 300: Controlled Screw Clamping within the Festool System

The FSZ 300 uses a traditional threaded spindle to apply clamping pressure progressively. Its system-compatible head works with the designated Festool guide rail and MFT clamping arrangements, combining familiar screw-clamp operation with convenient positioning.

Product Highlights

  • 300 mm maximum opening: Accommodates a useful range of clamping setups and workpiece thicknesses.
  • System-compatible clamp head: Fits the designated channels on compatible Festool guide rails and tables.
  • Solid steel construction: Provides a robust structure for regular workshop and site use.
  • Wooden screw handle: Ergonomically shaped for comfortable, controlled tightening.
  • Soft protective cap: Helps reduce slipping and protects the surface at the pressure-pad contact point.
  • Two-clamp pack: Provides a matched pair for securing a rail or workpiece at two suitable positions.

Product Compatibility

  • Festool FS/2 guide rails: Fits the designated underside clamping channel.
  • Festool FS/2-KP guide rails: Compatible with the rail's designated clamping arrangement.
  • Festool FSK cross cutting guide rails: For securing the rail using its compatible clamping channel.
  • Festool MFT multifunction tables: Works with compatible table holes and clamping channels, including suitable MFT 3 arrangements.
  • Festool mobile workshop: Suitable for compatible workholding positions provided by the system.

Check the Complete Clamping Setup

The stated 300 mm capacity is the clamp's maximum opening. Allow for the combined thickness of the workpiece, guide rail, table or supporting material within the clamping arrangement. Check that the clamp head is correctly engaged and that the spindle clears the tool's travel path.

Features

  • Threaded clamping spindle: Allows gradual adjustment of pressure.
  • Adjustable sliding jaw: Positions the spindle to suit the required opening before final tightening.
  • Specialised clamp head: Designed for the Festool guide rail and MFT systems.
  • Protective pressure-pad cap: Cushions the contact point against the workpiece or support.

Benefits

  • Stable guide rail positioning: Helps prevent unwanted movement during the operation.
  • Controlled workholding: Screw adjustment lets you tighten the clamp progressively.
  • Clear working surface: Underside rail fastening helps keep clamp components away from the tool's upper running surface.
  • Versatile workshop use: Supports rail fastening and workpiece clamping within compatible setups.

Application

  • Securing compatible Festool guide rails before guided cuts.
  • Fastening compatible FSK cross cutting guide rails.
  • Holding workpieces on an MFT table for sanding or routing.
  • Securing components on compatible mobile workshop arrangements.
  • General workholding where the clamp geometry and capacity suit the task.

Extra Information

  • Vermont Sales product code: FES489571.
  • Festool article number: 489571.
  • Model designation: FSZ 300.
  • Pack contents: Two screw clamps, each with a maximum clamping width of 300 mm.

Clamping Width and Throat Depth

The 300 mm specification describes the maximum opening between the clamping faces. It does not describe throat depth or how far the clamp can reach inward from a workpiece edge.

Positioning beneath a Guide Rail

Insert the specialised head into the rail's designated underside channel and move it to a suitable fastening position. Check the rail alignment again after tightening.

Protecting Finished Surfaces

Keep the protective cap and contact area clean. Where appropriate, use a clean packing piece to spread the pressure on delicate surfaces, while maintaining a stable clamping arrangement.

Pro Tips

  • Position both clamps before final tightening so the rail can be aligned accurately.
  • Use only enough pressure to hold the setup securely without distorting the workpiece.
  • Check that the full tool movement remains clear of both clamps before starting.
  • Support the workpiece and offcut so neither can shift unexpectedly during cutting.
  • Remove dust and debris from the clamping channels before inserting the clamp heads.

How to Use

  • Stop and isolate the power tool before adjusting the workholding setup.
  • Position the guide rail or workpiece on a stable, adequately supported surface.
  • Engage the clamp head in the compatible channel or MFT clamping position.
  • Slide the adjustable jaw towards the opposing contact surface.
  • Turn the wooden handle to tighten the spindle until the setup is secure.
  • Check alignment, stability and clearance along the complete tool path.
  • After the operation, wait for the tool to stop before loosening and removing the clamps.

Safety

  • Check that the clamps are undamaged and correctly engaged before use.
  • Keep clamp components clear of blades, cutters and the complete tool travel path.
  • Do not overtighten or use extensions on the wooden handles.
  • Keep fingers clear of the jaws and pressure pads when tightening.
  • Support the workpiece and offcut independently where required.
  • Follow the instructions for the guide rail, table and power tool used in the setup.

Specifications

Description Spec
BrandFestool
Product DescriptionGuide Rail and Workholding Clamp
Cat No.FES489571
Festool Article Number489571
Model DesignationFSZ 300
Product TypeScrew-operated fastening clamp
Maximum Clamping Width300 mm
Clamp ConstructionSolid steel
Handle MaterialWood
Pressure-Pad ProtectionSoft protective cap
Compatible SystemsFS/2, FS/2-KP, FSK and MFT
Quantity per Pack2 clamps

Scope of Delivery:

  • 2 × Festool FSZ 300 screw clamps with 300 mm maximum clamping width.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy