Menu
Your Cart

Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop

Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop
  • Brand: FESTOOL
  • Model: FES488754
  • Weight: 0.14kg
  • Dim: 144 mm x 108 mm x 40 mm
  • UPC: 4014549085158
Price:
R 1,079.28
Ex VAT: R 938.50

Available Options

Festool FE-FS/SZ-OF 1010 Fine Adjuster for Guide Stop

At a Glance: Graduated fine adjuster for precise routing-distance settings. Each scale mark represents 0.1 mm of adjustment, with 1 mm per full rotation. For compatible Festool guide rail adapters and trammel setups.

Set your routing position in small, controlled steps with the Festool FE-FS/SZ-OF 1010 fine adjuster. Used with the matching guide rail adapter, it helps you refine the cutter’s position after the initial setup, making it useful for accurately locating grooves, recesses and other guided cuts. The easy-to-read scale provides a clear reference for incremental changes. Festool also specifies this adjuster within its OF 1010 accessory system for fine adjustment of the compatible trammel unit.

Fine control after initial positioning

Position the guiding arrangement approximately where required, then use the graduated adjuster to refine the setting. One scale division represents 0.1 mm, while a complete turn represents 1 mm. This makes small corrections easier to control when establishing a routing line or adjusting a subsequent pass.

Product Highlights

  • 0.1 mm graduations: Make small, measured changes to the routing-distance setting.
  • 1 mm per rotation: A full turn provides a straightforward reference for larger corrections.
  • Easy-to-read scale: Helps you track adjustment movement during setup.
  • Guide rail adapter integration: Designed for readjustment within the corresponding Festool routing guide system.
  • Trammel adjustment: Also used with the matching SZ-OF 1010 arrangement for circular routing setup.

Product Compatibility

  • Festool OF 1010 and OF 1010 R: Compatible when used with the corresponding guiding accessories.
  • Festool OF 900 and OF 1000: Listed for the matching router guide configurations.
  • Festool KF: Listed by Festool for compatible KF guiding arrangements.
  • FS-OF 1010 guide rail adapter: Matching adapter, order number 488752; previously designated FS-OF 1000.
  • SZ-OF 1010 trammel unit: Matching circular-routing accessory, order number 483922.

Required system parts: Use the adjuster with the appropriate guide rail adapter or compatible trammel arrangement and the corresponding router guide rods. Confirm the complete setup for your machine before ordering.

Features

  • Graduated adjustment control: Scale markings indicate movement in tenths of a millimetre.
  • Rotary adjustment: One complete rotation corresponds to 1 mm of movement.
  • System accessory: Works with the listed Festool router and guiding combinations.
  • Clear setting reference: Supports measured readjustment during routing preparation.

Benefits

  • Controlled corrections: Refine the routing position in small steps.
  • Easier fit adjustment: Useful when a second guided pass is needed to refine a groove or recess.
  • Consistent setup method: Use the scale to make known adjustments, then verify the result with a test cut.

Application

  • Fine positioning of straight grooves and housings with the compatible guide rail adapter.
  • Adjusting the routing distance for decorative grooves and surface recesses.
  • Refining a subsequent routing pass to achieve the required fit.
  • Fine adjustment during circular routing with the compatible trammel unit.
  • Furniture making, cabinetmaking and joinery setup work.

Extra Information

  • Current designation: FE-FS/SZ-OF 1010, Festool order number 488754.
  • Earlier catalogue designation: FE-FS/OF 1000 identifies the same order number in older Festool catalogues.
  • Scale example: Five 0.1 mm divisions represent 0.5 mm of setting movement.
  • Accessory system: Festool includes this fine adjuster in the ZS-OF 1010 M accessory set.

Check the Finished Cut

The graduated scale provides a reference for adjustment movement. Confirm the resulting cutter position and fit with a test cut in matching scrap material before machining the finished workpiece.

Circular Routing Setup

When using the matching trammel arrangement, distinguish between the radius setting and the required finished diameter. Verify the setup and cutter allowance before routing the circle.

Pro Tips

  • Make the initial position setting before using the fine adjuster for the final correction.
  • Approach the final setting consistently from the same adjustment direction.
  • Keep guide rods and mounting areas free of chips that could affect positioning.
  • Check all relevant clamps and locking points after adjustment and before routing.

How to Use

  • Switch off the router, allow the cutter to stop and disconnect the mains supply.
  • Fit the fine adjuster to the compatible guiding arrangement according to the router and accessory instructions.
  • Set the approximate routing position and prepare the appropriate clamps for adjustment as directed in the instructions.
  • Turn the adjustment control to refine the position: one graduation represents 0.1 mm and one full turn represents 1 mm.
  • Secure the relevant locking points and check that the router and guiding assembly are properly supported.
  • Make a test cut in matching scrap material and measure the result.
  • Disconnect the router before making further corrections, then proceed once the setup is confirmed.

Safety

  • Disconnect the router from the mains supply before fitting accessories or adjusting the setup.
  • Secure the workpiece and guiding arrangement, and check all clamps before routing.
  • Wear suitable eye, hearing and respiratory protection, and use appropriate dust extraction.
  • Follow the router and accessory instructions, and keep hands clear of the cutter.

Specifications

DescriptionSpec
BrandFestool
Cat No.FES488754
Festool Order Number488754
ModelFE-FS/SZ-OF 1010
Earlier Model DesignationFE-FS/OF 1000
Product TypeFine adjuster for guide stop
Scale Graduation0.1 mm
Adjustment per Full Rotation1 mm
Listed Router CompatibilityOF 900, OF 1000, OF 1010, OF 1010 R, KF
Matching Guide Rail Adapter488752 – FS-OF 1010
Matching Trammel Unit483922 – SZ-OF 1010
EAN4014549085158
Quantity Supplied1 fine adjuster
PackagingDisplay pack

Scope of Delivery:

  • 1 x Festool FE-FS/SZ-OF 1010 fine adjuster, order number 488754.

Scope note: Router, guide rail adapter, trammel unit, guide rods and guide rail are supplied separately.

OF 1010 Routing with a Guide Rail

Festool TV demonstrates the guide rail setup and routing process. Fine adjustment of the guide stop is shown from approximately 5:43.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy