Menu
Your Cart

Festool AH-OF 1010 Router Dust Extraction Hood for Edge Routing and VS 500 / VS 600

Festool AH-OF 1010 Router Dust Extraction Hood for Edge Routing and VS 500 / VS 600
Festool AH-OF 1010 Router Dust Extraction Hood for Edge Routing and VS 500 / VS 600
  • Brand: FESTOOL
  • Model: FES484453
  • Weight: 0.24kg
  • Dim: 167 mm x 160 mm x 95 mm
  • UPC: 4014549094303
Price:
R 1,136.78
Ex VAT: R 988.50

Available Options

Festool AH-OF 1010 Router Dust Extraction Hood

At a Glance: Transparent extraction hood | Mounts via the router guide rods | Suitable for 27 mm extraction hoses | For edge routing and VS 500 / VS 600 jointing applications

Keep routing chips under control while maintaining a clear view of your work with the Festool AH-OF 1010 dust extraction hood. Designed for compatible Festool routers, this attachment collects debris close to the cutting area during edge trimming, profiling, chamfering and rebating. Its transparent plastic construction helps you monitor the work, while mounting through the router’s guide rod system holds the hood securely in position. Connect a suitable 27 mm hose and dust extractor to create a practical extraction setup for furniture making, joinery and decorative routing.

Targeted extraction for edge and jointing work

Positioning the hood near the machining area helps capture chips where they are generated. The attachment also supports routing with the Festool VS 500 and VS 600 jointing systems.

Product Highlights

  • Secure mounting: Attaches using the compatible router’s guide rods.
  • Visible working area: Transparent plastic allows you to observe the routing operation.
  • 27 mm hose compatibility: Connecting sleeve accepts a suitable extraction hose.
  • Versatile routing applications: Suitable for curves, profiles, chamfers, rebates and edge trimming.
  • Jointing system support: Intended for use with VS 500 / VS 600 setups and compatible routers.

Product Compatibility

  • Festool OF 900: Compatible router model.
  • Festool OF 1000: Compatible router model.
  • Festool OF 1010 and OF 1010 R: Compatible router models.
  • Festool KF: Included in the manufacturer’s compatibility listing.
  • Festool VS 500 and VS 600: Suitable for jointing operations when used with a compatible router.
  • Dust extraction: Suitable for a 27 mm extraction hose; Festool recommends pairing the attachment with a Festool extractor.

Model Identification

Festool currently lists part number 484453 as AH-OF 1010. Older catalogues identify the same part number as AH-OF 1000.

Features

  • Transparent hood: Combines chip collection with visibility around the work area.
  • Guide rod attachment: Uses the router’s mounting system to position the hood.
  • Integrated hose connection: Provides a connection for a suitable 27 mm suction hose.

Benefits

  • Cleaner working area: Helps reduce loose chips accumulating around the routing operation.
  • Easier monitoring: Allows visual checks without removing the hood.
  • Useful workshop accessory: Supports both edge machining and compatible template jointing work.

Application

  • Trimming wooden edges.
  • Routing curved edges and decorative profiles.
  • Machining chamfers.
  • Routing rebates.
  • Jointing work using Festool VS 500 / VS 600 systems.

Extra Information

  • Extraction performance: Effective collection depends on hood positioning, unobstructed airflow and the connected extractor.
  • Setup clearance: Check that the hood clears the cutter, workpiece and any template throughout the intended movement.
  • Routine care: Remove accumulated debris and keep the transparent surfaces clean for visibility.

Pro Tips

  • Route the extraction hose so it moves freely without pulling against the router.
  • Check the setup on an offcut before machining the finished component.
  • If collection drops, stop and inspect the hose, hood opening and extractor for restrictions.

How to Use

  • Disconnect the router from its power supply before fitting or adjusting the attachment.
  • Mount the hood using the compatible router’s guide rods, following the machine instructions.
  • Position it for the operation and secure the mounting points.
  • Check cutter clearance and the full intended travel with the machine switched off.
  • Connect a suitable 27 mm extraction hose and start the extractor before routing.
  • Secure the workpiece and perform the cut according to the router and jointing system instructions.
  • After use, wait for the cutter to stop and disconnect the machine before cleaning or removing the hood.

Safety

  • Wear suitable eye, hearing and respiratory protection for the material and routing operation.
  • Disconnect the router before installation, adjustment, cutter changes or clearing blockages.
  • Confirm that the attachment is secure and cannot contact the rotating cutter.
  • Keep hands clear of the cutting area and secure the workpiece.
  • Use an extractor suitable for the dust being produced and follow all machine safety instructions.

Specifications

Description Spec
BrandFestool
Cat No.FES484453
Manufacturer Part Number484453
ModelAH-OF 1010
Earlier Catalogue DesignationAH-OF 1000
Product TypeRouter dust extraction hood
Hood MaterialTransparent plastic
Mounting MethodVia the router guide rods
Compatible Suction Hose Diameter27 mm
Machine CompatibilityOF 900, OF 1000, OF 1010, OF 1010 R, KF
Jointing System CompatibilityVS 500 / VS 600 with a compatible router
Quantity1

Scope of Delivery:

  • 1 × Festool AH-OF 1010 dust extraction hood, part number 484453.

Accessory only: Router, cutter, jointing system, extraction hose and dust extractor are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy