TORK CRAFT

Stock: In Stock Model: TCID0850-SK02 UPC: 6009515882365

Output Shaft & Big Gear Compl. Kit (5-11/15) S/kit

Tork Craft Output Shaft & Big Gear Compl. Kit (5-11/15) Service Kit For TCID0850 At a Glance: Output shaft and big gear complete service kit (parts 5–11 and 15) for the Tork Craft TCID0850 impact driver An impact driver can have a strong motor and still feel weak if the drive train is worn. If you’re hearing grinding, feeling slipping under load, or noticing inconsistent power delivery, the output shaft and primary gear set are prime suspects. The Tork Craft TCID0850-SK02 Output Shaft ....

R 136.44

Ex VAT:R 118.64

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK03 UPC: 6009515882372

Imp. Selector Knob & Change Over Plate (13/14) S/kit

Tork Craft Imp. Selector Knob & Change Over Plate (13/14) Service Kit For TCID0850 At a Glance: Replacement selector knob and change-over plate (parts 13 and 14) for forward/reverse control on the Tork Craft TCID0850 If your impact driver’s forward/reverse selector feels loose, sticks, or won’t engage cleanly, the tool becomes frustrating fast (and a little bit unsafe—because “surprise direction” is never a feature). The Tork Craft TCID0850-SK03 Imp. Selector Knob & Change Over Pla....

R 39.27

Ex VAT:R 34.15

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK04 UPC: 6009515882389

Armature & Bearing Kit (12/16-18) S/kit

Tork Craft Armature & Bearing Kit (12/16-18) Service Kit For TCID0850 At a Glance: Replacement armature and bearing components (part 12 and parts 16–18) for the Tork Craft TCID0850 impact driver The armature is the spinning heart of your impact driver’s motor. When it’s damaged—or when its bearings are worn—the tool starts telling on itself: rough running, extra noise, reduced power, overheating, and sometimes that unmistakable “electrical smell” nobody wants. The Tork Craft TCID0850-S....

R 409.31

Ex VAT:R 355.92

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK05 UPC: 6009515882396

Imp. Drill Stator (19) S/kit

Tork Craft Imp. Drill Stator (19) Service Kit For TCID0850 At a Glance: Replacement stator (part 19) service kit for the Tork Craft TCID0850 impact driver motor When an impact driver starts losing power, running hot, or tripping out unexpectedly, the fault isn’t always in the brushes or switch—sometimes the motor’s stationary windings (the stator) are the real culprit. The Tork Craft TCID0850-SK05 Imp. Drill Stator service kit replaces the stator component (part 19), restoring the magnetic..

R 257.72

Ex VAT:R 224.10

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK06 UPC: 6009515882402

Inductance Long & Short (21/22) S/kit

Tork Craft Inductance Long & Short (21/22) Service Kit For TCID0850 At a Glance: Replacement inductance components (parts 21 and 22) for the Tork Craft TCID0850 impact driver electrical system Inside many power tools, inductance coils (often called chokes) do an unglamorous but important job: they help smooth electrical behaviour, reduce interference, and protect the tool’s electrical system from spikes and noise created during operation. If your TCID0850 has electrical faults, intermi....

R 16.54

Ex VAT:R 14.38

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK07 UPC: 6009515882419

Imp. Drill Carbon Brush Pair (23) S/kit

Tork Craft Imp. Drill Carbon Brush Pair (23) Service Kit For TCID0850 At a Glance: Replacement carbon brush pair (part 23) for the Tork Craft TCID0850 impact driver motor Carbon brushes are the “contact .” between your power source and the spinning armature inside the motor. When they wear down, the tool starts complaining—weak power, intermittent running, excessive sparking, and sometimes a refusal to start unless you coax it. The Tork Craft TCID0850-SK07 Imp. Drill Carbon Brush Pair serv..

R 22.74

Ex VAT:R 19.77

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK08 UPC: 6009515882426

Brush Holder Set (24/25) S/kit

Tork Craft Brush Holder Set (24/25) Service Kit For TCID0850 At a Glance: Replacement brush holder set (parts 24 and 25) for the Tork Craft TCID0850 impact driver Fresh carbon brushes are only ½ the story—if the brush holders are cracked, worn, or letting the brushes bind, the motor won’t get clean contact and performance can drop fast. The Tork Craft TCID0850-SK08 Brush Holder Set service kit replaces the brush holder components (parts 24 and 25), restoring proper brush alignment and smoo..

R 13.78

Ex VAT:R 11.98

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK09 UPC: 6009515882433

Repl. Trigger Compl. Kit (26-28) S/kit

Tork Craft Repl. Trigger Compl. Kit (26-28) Service Kit For TCID0850 At a Glance: Replacement trigger complete kit (parts 26–28) for the Tork Craft TCID0850 impact driver A worn trigger turns a perfectly good impact driver into a temperamental gremlin—starts and stops when it feels like it, has dead spots, or refuses to hold a steady speed. The Tork Craft TCID0850-SK09 Repl. Trigger Compl. kit replaces the trigger components (parts 26–28), restoring proper control response and more dependa..

R 180.54

Ex VAT:R 156.99

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK10 UPC: 6009515882440

Repl. Cable & Sheath (29/30) S/kit

Tork Craft Repl. Cable & Sheath (29/30) Service Kit For TCID0850 At a Glance: Replacement cable and protective sheath components (parts 29 and 30) for the Tork Craft TCID0850 impact driver Cables live a hard life in the workshop—flexed, pulled, snagged, and sometimes “repaired” with tape and hope. If your impact driver’s cable is damaged or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID0850-SK10 Repl. Cable & Sheath ....

R 97.16

Ex VAT:R 84.49

Contact us

Stockist

Stock: In Stock Model: TCID0850-SK11 UPC: 6009515882457

Housing L/r With Screws (31/33) S/kit

Tork Craft Housing L/R With Screws (31/33) Service Kit For TCID0850 At a Glance: Replacement left and right housing with screws (parts 31 and 33) for the Tork Craft TCID0850 impact driver An impact driver’s housing does a lot more than look pretty. It protects the motor and wiring, supports internal components, and gives you the grip and structure needed to control the tool under repeated impact loads. If your TCID0850 housing is cracked, stripped at the screw bosses, or no longer closing ..

R 183.30

Ex VAT:R 159.39

Contact us

Stockist

Auxilary Handle Compl. With Rod (34-39) S/kit

Out Of Stock

Stock: Out Of Stock Model: TCID0850-SK12 UPC: 6009515882464

Auxilary Handle Compl. With Rod (34-39) S/kit

Tork Craft Auxilary Handle Compl. With Rod (34-39) Service Kit For TCID0850 At a Glance: Auxilary handle complete with rod service kit (parts 34–39) for improved control on the Tork Craft TCID0850 When an impact drill/driver starts working hard, the torque can twist the tool in your hands—and that’s where an auxiliary handle earns its keep. If your handle is missing, cracked, stripped, or the rod/clamp parts are worn, you lose control and comfort fast. The Tork Craft TCID0850-SK12 Auxilary..

R 103.36

Ex VAT:R 89.88

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK01 UPC: 6009515882488

Output Shaft & Bearing Compl. (3-6/9) S/kit

Tork Craft Output Shaft & Bearing Compl. (3-6/9) Service Kit For TCID1100 At a Glance: Output shaft and bearing complete assembly (parts 3–6 and 9) for the Tork Craft TCID1100 If your impact tool starts feeling rough, noisy, or develops play at the output, the output shaft and bearing area is often where the trouble lives. These components carry load, keep alignment true, and transfer torque from the gearbox to the bit. The Tork Craft TCID1100-SK01 Output Shaft & Bearing Compl. ser....

R 139.20

Ex VAT:R 121.04

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK02 UPC: 6009515882495

Gearbox Housing With Screws (7/8) S/kit

Tork Craft Gearbox Housing With Screws (7/8) Service Kit For TCID1100 At a Glance: Replacement gearbox housing with screws (parts 7 and 8) for the Tork Craft TCID1100 The gearbox housing is the structural cradle that keeps the gears aligned and protected while the tool delivers torque and impact forces. If the housing is cracked, stripped, or no longer seating correctly, the gearbox can develop play, noise and premature wear. The Tork Craft TCID1100-SK02 Gearbox Housing With Screws service..

R 133.68

Ex VAT:R 116.24

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK03 UPC: 6009515882501

Gear Selector Knob Compl. (11-15) S/kit

Tork Craft Gear Selector Knob Compl. (11-15) Service Kit For TCID1100 At a Glance: Gear selector knob complete assembly (parts 11–15) for the Tork Craft TCID1100 When the gear selector starts slipping, sticking, or won’t engage properly, you lose the ability to match speed and torque to the job—meaning more strain on the tool and less control for you. The Tork Craft TCID1100-SK03 Gear Selector Knob Compl. service kit replaces the gear selector components (parts 11–15), restoring positive s..

R 17.92

Ex VAT:R 15.58

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK04 UPC: 6009515882518

Gear Set With Bearing Compl. (16-25) S/kit

Tork Craft Gear Set With Bearing Compl. (16-25) Service Kit For TCID1100 At a Glance: Gear set with bearing complete assembly (parts 16–25) for the Tork Craft TCID1100 gearbox When a gearbox starts grinding, slipping, or sounding “dry and unhappy,” it’s usually because the gears and bearings that carry load are worn, damaged, or contaminated. The Tork Craft TCID1100-SK04 Gear Set With Bearing Compl. service kit replaces the key gearbox drive components (parts 16–25), restoring proper engag..

R 268.74

Ex VAT:R 233.69

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK05 UPC: 6009515882525

Imp. Selector Knob & Change Over Plate (26-28) S/kit

Tork Craft Imp. Selector Knob & Change Over Plate (26-28) Service Kit For TCID1100 At a Glance: Replacement selector knob and change-over plate kit (parts 26–28) for forward/reverse control on the Tork Craft TCID1100 Forward/reverse selection should feel definite—click, engage, done. If your TCID1100 selector is loose, sticky, or won’t shift cleanly, you can end up with partial engagement (which is the mechanical version of “maybe”) and that’s bad for control and for internal parts. Th....

R 79.94

Ex VAT:R 69.51

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK06 UPC: 6009515882532

Intermediate Spindle & Helical Gear Kit (29-34) S/kit

Tork Craft Intermediate Spindle & Helical Gear Kit (29-34) Service Kit For TCID1100 At a Glance: Intermediate spindle and helical gear kit (parts 29–34) for the Tork Craft TCID1100 gearbox drive train Inside the TCID1100 gearbox, the intermediate spindle and helical gear components do the heavy lifting of transferring power smoothly through the gear train. When these parts wear, you’ll often notice extra noise, rough running, slipping under load, or that “gritty” feel that suggests the....

R 135.06

Ex VAT:R 117.44

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK07 UPC: 6009515882549

Armature & Bearing Kit (38-40) S/kit

Tork Craft Armature & Bearing Kit (38-40) Service Kit For TCID1100 At a Glance: Replacement armature and bearing kit (parts 38–40) for the Tork Craft TCID1100 motor The armature is the spinning engine inside your impact drill/driver, and its bearings are what keep that rotation smooth and stable. When the armature is damaged—or bearings start to rumble—the tool can lose power, run hot, spark excessively, and develop that rough “something’s not right” feel. The Tork Craft TCID1100-SK07 ....

R 403.80

Ex VAT:R 351.13

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK08 UPC: 6009515882556

Imp. Drill Stator (41) S/kit

Tork Craft Imp. Drill Stator (41) Service Kit For TCID1100 At a Glance: Replacement stator (part 41) service kit for the Tork Craft TCID1100 motor The stator is the stationary ½ of the motor that creates the magnetic field your tool needs to make torque. When stator windings are damaged, burnt, or shorted, the symptoms are usually loud and clear: reduced power, overheating, intermittent running, tripping, and that tell-tale “electrical” smell. The Tork Craft TCID1100-SK08 Imp. Drill Stator..

R 330.76

Ex VAT:R 287.62

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK09 UPC: 6009515882563

Brush Holder Set (42/44-46) S/kit

Tork Craft Brush Holder Set (42/44-46) Service Kit For TCID1100 At a Glance: Replacement brush holder set (parts 42 and 44–46) for the Tork Craft TCID1100 motor Carbon brushes can only do their job if they slide freely and stay correctly aligned against the commutator. If the brush holders are cracked, heat-damaged, worn, or packed with carbon dust, brushes can bind or sit skew—causing weak power, intermittent running and excessive sparking. The Tork Craft TCID1100-SK09 Brush Holder Set se..

R 37.21

Ex VAT:R 32.36

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK10 UPC: 6009515882570

Imp. Drill Carbon Brush Pair (43) S/kit

Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100 At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..

R 15.16

Ex VAT:R 13.18

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK11 UPC: 6009515882587

Repl. Trigger Compl. Kit (47-49) S/kit

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

R 165.38

Ex VAT:R 143.81

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK12 UPC: 6009515882594

Repl. Cable & Sheath (50-53) S/kit

Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100 At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100 Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry ., or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ....

R 143.32

Ex VAT:R 124.63

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK13 UPC: 6009515882600

Housing L/r With Screws (54-56) S/kit

Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100 At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100 The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw .s, or no longer closing properly, the tool can feel..

R 97.85

Ex VAT:R 85.09

Contact us

Stockist

Stock: In Stock Model: TCID1100-SK14 UPC: 6009515882617

Auxilary Handle Compl. With Rod (57-61) S/kit

Tork Craft Auxilary Handle Compl. With Rod (57-61) Service Kit For TCID1100 At a Glance: Auxilary handle complete with rod service kit (parts 57–61) for improved control on the Tork Craft TCID1100 When torque ramps up, an impact drill/driver can try to twist itself out of your hands—especially on larger fasteners or heavier drilling. An auxiliary handle gives you the extra leverage and stability needed to stay in control and work more comfortably. If your original handle is missing, cracke..

R 115.77

Ex VAT:R 100.67

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: TCID1100-SK15 UPC: 6009515882624

Impact Drill 220v 1100w Rebuild Tool.

Tork Craft Impact Drill 220V 1100W Rebuild Tool Kit At a Glance: Comprehensive rebuild kit for the Tork Craft TCID1100 impact drill (220V, 1100W) Some tools don’t need replacing—they need rebuilding. The Tork Craft TCID1100-SK15 Impact Drill 220V 1100W Rebuild Tool kit is the “reset button” for a hardworking TCID1100 that’s been through the wars. Instead of chasing faults one part at a time, this rebuild kit is designed as a complete refurbishment solution to restore performance, control a..

R 1,984.56

Ex VAT:R 1,725.70

Contact us

Stockist

Stock: In Stock Model: TCMC001-01 UPC: 6009515883942

Replacement Set For Caster Wheels

Tork Craft Replacement Set For Caster Wheels At a Glance: Replacement caster wheel set to bring back smooth rolling and workshop mobility Caster wheels are the unsung heroes of a tidy workshop—until they wear out and everything turns into a dragging, squeaking mission. Dust, swarf, rough concrete and heavy loads all take their toll, and once wheels start wobbling or flat-spotting, moving equipment becomes harder and less safe. The Tork Craft TCMC002-1 Replacement Set for Caster Wheels is a..

R 294.17

Ex VAT:R 255.80

Contact us

Stockist

Stock: In Stock Model: TCMC002-1 UPC: 6009515883959

Replacement Set For Caster Wheels

Tork Craft Replacement Set For Caster Wheels For Garage Creeper At a Glance: Replacement caster wheel set for a garage creeper to restore smooth, quiet rolling A garage creeper is only as good as its wheels. When caster wheels wear, flat-spot, seize, or start wobbling, the creeper stops gliding and starts fighting you—usually while you’re ½way under a vehicle, which is the worst possible time for drama. The Tork Craft TCMC002-1 Replacement Set for Caster Wheels is made for creeper-style mo..

R 490.25

Ex VAT:R 426.30

Contact us

Stockist

Stock: In Stock Model: TCMC002-2 UPC: 6009515883966

Replacement Fixings & Fastners

Tork Craft Replacement Fixings & Fastners (TCMC002-2) At a Glance: Genuine replacement hardware kit for the Tork Craft TCMC002 Mechanic Creeper/Chair (2-in-1). That “wobble”, rattle, or missing bolt on your mechanic creeper/chair is more than just annoying—it can turn into a safety issue fast. The Tork Craft TCMC002-2 Replacement Fixings & Fastners kit is the easy way to bring your TCMC002 creeper/chair back to a tight, confident feel, replacing worn, damaged or m....

R 490.25

Ex VAT:R 426.30

Contact us

Stockist

Stock: In Stock Model: TCMC003-1 UPC: 6009515887568

Replacement Set For Caster Wheels

Tork Craft Replacement Set For Caster Wheels (TCMC003-1) At a Glance: Genuine replacement caster wheel set for the Tork Craft TCMC003 Mechanic Chair (adjustable round seat & tool tray). A mechanic chair is only as good as its wheels. When castors get flat spots, seize up, crack, or start “skipping” across the floor, the chair becomes frustrating to use—and can feel unsafe when you shift your weight. The Tork Craft TCMC003-1 Replacement Set For Caster Wheels is the str....

R 441.20

Ex VAT:R 383.65

Contact us

Stockist

Coolant Bottle With Cap (1/2) Stand Service Kit

Out Of Stock

Stock: Out Of Stock Model: TCMD0035HD-SK13 UPC: 6009515880125

Coolant Bottle With Cap (1/2) Stand Service Kit

Tork Craft Coolant Bottle With Cap (1/2) Stand Service Kit (TCMD0035HD-SK13) At a Glance: Replacement coolant bottle & cap for the TCMD0035HD stand—diagram parts (1/2) for dependable coolant supply. A proper coolant supply keeps core drilling under control—cooler cutting, less dust, and cleaner results. The Tork Craft TCMD0035HD-SK13 Coolant Bottle With Cap Stand Service Kit replaces the coolant reservoir components shown as parts (1/2), giving you a fresh bottle and ....

R 98.93

Ex VAT:R 86.03

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK14 UPC: 6009515880132

Coolant Valve With Pipe & Coupling (3/4/5) Stand Service Kit

Tork Craft Coolant Valve With Pipe & Coupling (3/4/5) Stand Service Kit (TCMD0035HD-SK14) At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035HD stand—parts (3/4/5) for controlled coolant flow. Core drilling without proper coolant flow is like sprinting with a plastic bag over your head—things get hot, ugly, and expensive very quickly. The Tork Craft TCMD0035HD-SK14 Coolant Valve With Pipe & Coupling Stand Service Kit replaces the c....

R 249.55

Ex VAT:R 217.00

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK15 UPC: 6009515880149

Bearing & Gear Set (18-23) Stand Service Kit

Tork Craft Bearing & Gear Set (18-23) Stand Service Kit (TCMD0035HD-SK15) At a Glance: Replacement bearing & gear set for the TCMD0035HD stand (parts 18–23) to restore smooth feed and reliable stand drive performance. When a mag base core drill stand starts feeling rough, noisy, or “notchy”, it’s often the bearings and gears telling you they’ve done their shift. The Tork Craft TCMD0035HD-SK15 Bearing & Gear Set Stand Service Kit replaces the key bearing and gear co....

R 451.84

Ex VAT:R 392.90

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK16 UPC: 6009515880156

Pinion Shaft & Key (24/25) Stand Service Kit

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035HD-SK16) At a Glance: Replacement pinion shaft & key for the TCMD0035HD stand (parts 24/25) to restore solid feed engagement and smooth travel. The feed on a core drill stand should feel confident and predictable—turn the handle, the head moves. No slipping, no “dead spots”, no crunchy surprises. The Tork Craft TCMD0035HD-SK16 Pinion Shaft & Key Stand Service Kit replaces the components referenced as ....

R 345.53

Ex VAT:R 300.46

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK17 UPC: 6009515880163

Repl. Handle (26-28) Stand Service Kit

Tork Craft Replacement Handle (26-28) Stand Service Kit (TCMD0035HD-SK17) At a Glance: Replacement feed handle kit for the TCMD0035HD stand—diagram parts (26–28) for smooth, controlled drilling feed. The handle is where your control lives. If it’s bent, cracked, slipping, or just plain uncomfortable, your drilling accuracy and safety take a knock. The Tork Craft TCMD0035HD-SK17 Replacement Handle Stand Service Kit replaces the components referenced as parts (26–28), resto..

R 511.65

Ex VAT:R 444.91

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK18 UPC: 6009515880170

Panel Plate Witch Screws ( 36/37/39/40/48) Stand Service Kit

Tork Craft Panel Plate With Screws (36/37/39/40/48) Stand Service Kit (TCMD0035HD-SK18) At a Glance: Replacement panel plate with screws for the TCMD0035HD stand—diagram parts (36/37/39/40/48) for a secure, protected assembly. A missing panel plate or stripped screws might look like a minor problem… right up until dust, slurry and workshop grit start finding their way into places they shouldn’t. The Tork Craft TCMD0035HD-SK18 Panel Plate With Screws Stand Service Kit replaces ..

R 691.78

Ex VAT:R 601.55

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK19 UPC: 6009515880187

Speed Control & Motor Switch (38/41-47) Stand Service Kit

Tork Craft Speed Control & Motor Switch (38/41-47) Stand Service Kit (TCMD0035HD-SK19) At a Glance: Replacement speed control and motor switch components for the TCMD0035HD—diagram parts (38 and 41–47) for reliable control and consistent performance. If your mag base core drill starts acting “possessed”—intermittent power, erratic speed, sticky switching, or sudden cut-outs—there’s a good chance the control components are the culprits. The Tork Craft TCMD0035HD-SK19 Speed ....

R 1,861.99

Ex VAT:R 1,619.12

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK20 UPC: 6009515880194

Repl. Fuse (44) Stand Service Kit

Tork Craft Replacement Fuse (44) Stand Service Kit (TCMD0035HD-SK20) At a Glance: Genuine replacement fuse for the TCMD0035HD—diagram part (44) for circuit protection and power restoration. A fuse is a tiny component with one heroic job: sacrifice itself before something expensive does. If your Tork Craft TCMD0035HD mag base core drill has lost power or keeps cutting out, a blown fuse is a common culprit. The TCMD0035HD-SK20 Replacement Fuse Stand Service Kit replaces the..

R 34.70

Ex VAT:R 30.17

Contact us

Stockist

Stock: In Stock Model: TCMD0035HD-SK21 UPC: 6009515888251

Electric Cord C/w Plugtop & Protector (34/35) Service Kit

Tork Craft Electric Cord C/w Plugtop & Protector (34/35) Service Kit (TCMD0035HD-SK21) At a Glance: Replacement electric cord with plugtop and protector for the TCMD0035HD—diagram parts (34/35) for safe, reliable power delivery. A mag base core drill is not the place for a “mostly fine” power lead. Cuts, kinks, crushed insulation or a loose plug can turn into intermittent power, nuisance tripping—or worse. The Tork Craft TCMD0035HD-SK21 Electric Cord C/w Plugtop &....

R 392.66

Ex VAT:R 341.44

Contact us

Stockist

Stock: In Stock Model: TCMD0035PM-SK19 UPC: 6009515880378

Coolant Bottle With Cap (18/19) Stand Service Kit

Tork Craft Coolant Bottle With Cap (18/19) Stand Service Kit (TCMD0035PM-SK19) At a Glance: Replacement coolant bottle and cap for the TCMD0035PM stand—diagram parts (18/19) for dependable coolant supply. Coolant is the quiet workhorse of core drilling: it helps keep temperatures down, improves cutting behaviour, and flushes slurry away from the cutting edge. When the coolant bottle is cracked, missing, or the cap won’t seal properly, you lose flow control and end up with mess..

R 98.93

Ex VAT:R 86.03

Contact us

Stockist

Stock: In Stock Model: TCMD0035PM-SK20 UPC: 6009515880385

Coolant Valve With Pipe & Coupling (21/23/24) Stand Service Kit

Tork Craft Coolant Valve With Pipe & Coupling (21/23/24) Stand Service Kit (TCMD0035PM-SK20) At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035PM stand—diagram parts (21/23/24) for controlled coolant flow. Proper coolant flow is what keeps core drilling from turning into a smoky, gritty mess. It helps cool the cutter, flush slurry, and maintain a smoother cut. The Tork Craft TCMD0035PM-SK20 Coolant Valve With Pipe & Coupling Stand....

R 212.64

Ex VAT:R 184.90

Contact us

Stockist

Stock: In Stock Model: TCMD0035PM-SK21 UPC: 6009515880392

Coolant Bottle Bracket With Screw (20/22) Stand Service Kit

Tork Craft Coolant Bottle Bracket With Screw (20/22) Stand Service Kit (TCMD0035PM-SK21) At a Glance: Replacement coolant bottle bracket with screw for the TCMD0035PM stand—diagram parts (20/22) to keep the reservoir secure and correctly positioned. A coolant bottle that wobbles, sags, or can’t mount properly is a recipe for leaks, awkward hose routing, and a coolant feed that keeps letting you down. The Tork Craft TCMD0035PM-SK21 Coolant Bottle Bracket With Screw Stand Servic..

R 174.24

Ex VAT:R 151.51

Contact us

Stockist

Stock: In Stock Model: TCMD0035PM-SK22 UPC: 6009515888268

Electric Cord C/w Plugtop & Protector (27/28) Service Kit

Tork Craft Electric Cord C/w Plugtop & Protector (27/28) Service Kit (TCMD0035PM-SK22) At a Glance: Replacement electric cord with plugtop and protector for the TCMD0035PM—diagram parts (27/28) for safe, reliable power delivery. A mag base core drill works hard, often in rough conditions and sometimes around coolant—so the power lead needs to be 100% trustworthy. If your cord is nicked, crushed, stiff, or causing intermittent cut-outs when it moves, it’s time to replace it....

R 392.66

Ex VAT:R 341.44

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK015 UPC: 6009515880606

Coolant Bottle With Cap (24/25) Stand Service Kit

Tork Craft Coolant Bottle With Cap (24/25) Stand Service Kit (TCMD0035QE-SK015) At a Glance: Replacement coolant bottle and cap for the TCMD0035QE stand—diagram parts (24/25) for dependable coolant supply. Coolant is the quiet workhorse of core drilling: it helps manage heat, improves cutting behaviour, and flushes slurry away from the cutting edge. When the coolant bottle is cracked, missing, or the cap won’t seal, you lose flow consistency and end up with mess, heat and frus..

R 225.92

Ex VAT:R 196.45

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK016 UPC: 6009515880613

Coolant Valve With Pipe & Coupling (26-28) Stand Service Kit

Tork Craft Coolant Valve With Pipe & Coupling (26-28) Stand Service Kit (TCMD0035QE-SK016) At a Glance: Replacement coolant valve assembly with pipe & coupling for the TCMD0035QE stand—diagram parts (26–28) for controlled coolant flow. Proper coolant flow is what keeps core drilling from turning into a smoky, gritty mess. It helps cool the cutter, flush slurry, and maintain a smoother cut. The Tork Craft TCMD0035QE-SK016 Coolant Valve With Pipe & Coupling Stand Ser....

R 249.55

Ex VAT:R 217.00

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK017 UPC: 6009515880620

Coolant Bottle Bracket With Screw (29/30/66) Stand Service Kit

Tork Craft Coolant Bottle Bracket With Screw (29/30/66) Stand Service Kit (TCMD0035QE-SK017) At a Glance: Replacement coolant bottle bracket with screw for the TCMD0035QE stand—diagram parts (29/30/66) to keep the reservoir secure and correctly positioned. A coolant bottle that isn’t mounted properly can cause all sorts of drama—leaks, awkward hose routing, and a coolant feed that keeps letting you down. The Tork Craft TCMD0035QE-SK017 Coolant Bottle Bracket With Screw Stand S..

R 171.28

Ex VAT:R 148.94

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK018 UPC: 6009515884123

Repl. Handle ( 6-9) Stand Service Kit

Tork Craft Replacement Handle (6-9) Stand Service Kit (TCMD0035QE-SK018) At a Glance: Replacement feed handle kit for the TCMD0035QE stand—diagram parts (6–9) for smooth, controlled drilling feed. The feed handle is the part you trust with your accuracy. If it’s bent, cracked, loose, or slipping, the whole drilling experience becomes a wrestle. The Tork Craft TCMD0035QE-SK018 Replacement Handle Stand Service Kit replaces the handle components referenced as parts (6–9), re..

R 635.67

Ex VAT:R 552.76

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK019 UPC: 6009515884130

Pinion Shaft & Key (10-13) Stand Service Kit

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit (TCMD0035QE-SK019) At a Glance: Replacement pinion shaft and key for the TCMD0035QE stand—diagram parts (10–13) to restore solid feed engagement and smooth travel. The stand feed should feel direct: turn the handle, the head moves—smoothly and without surprises. When the pinion shaft or key wears, slips, or shears, you can get dead spots, uneven engagement, clicking under load, or sloppy movement that makes accurate d....

R 585.48

Ex VAT:R 509.11

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK020 UPC: 6009515887278

Top Mandrel Set (1-5) Stand Service Kit

Tork Craft Top Mandrel Set (1-5) Stand Service Kit (TCMD0035QE-SK020) At a Glance: Replacement top mandrel set for the TCMD0035QE stand—diagram parts (1–5) to restore alignment and smooth stand operation. On a mag base core drill stand, alignment is everything. If the upper mandrel area is worn or damaged, you’ll often feel it immediately—rough travel, inconsistent feed, unwanted play, and a stand that just doesn’t feel “tight” anymore. The Tork Craft TCMD0035QE-SK020 Top..

R 205.25

Ex VAT:R 178.48

Contact us

Stockist

Stock: In Stock Model: TCMD0035QE-SK021 UPC: 6009515887285

Gear, Bearing & Housing Set Compl. (14-23) Stand Service Kit

Tork Craft Gear, Bearing & Housing Set Complete (14-23) Stand Service Kit (TCMD0035QE-SK021) At a Glance: Complete gear, bearing and housing replacement set for the TCMD0035QE stand—diagram parts (14–23) to restore smooth, stable feed operation. When a stand feed starts feeling rough, noisy or sloppy, it’s usually not one tiny part—it’s the whole drive group telling you it’s worn. The Tork Craft TCMD0035QE-SK021 Gear, Bearing & Housing Set Complete Stand Service Kit re....

R 1,175.37

Ex VAT:R 1,022.06