TORK CRAFT

Stock: In Stock Model: TCAG0230-SK03 UPC: 6009515877538

Gear & Spindle Compl. (6-19/21/28) Service Kit

Tork Craft Gear & Spindle Compl. (6-19/21/28) Service Kit (TCAG0230-SK03) At a Glance: Complete gear and spindle assembly kit (parts 6–19, 21 & 28) for the Tork Craft TCAG0230 angle grinder The gearbox is where an angle grinder turns motor speed into usable torque — and the gear & spindle assembly is the heart of that conversion. When gears wear, bearings start complaining, or the spindle develops play, the grinder can become noisy, rough, and unreliable under load. The Tork Cr....

R 494.06

Ex VAT:R 429.62

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK04 UPC: 6009515877545

Gear Box & Needle Bearing (20/22/23) Service Kit

Tork Craft Gear Box & Needle Bearing (20/22/23) Service Kit (TCAG0230-SK04) At a Glance: Gearbox housing and needle bearing kit (parts 20, 22 & 23) for the Tork Craft TCAG0230 angle grinder The gear box is the rugged front housing that supports the grinder’s drivetrain and keeps the gear train aligned under load. When the gearbox is damaged (impact, stripped threads, worn bearing seats) or the needle bearing area is no longer supporting the rotating parts correctly, the grinder can....

R 187.68

Ex VAT:R 163.20

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK05 UPC: 6009515877552

Spindle Lock Pin & Spring (24/25) Service Kit

Tork Craft Spindle Lock Pin & Spring (24/25) Service Kit (TCAG0230-SK05) At a Glance: Spindle lock pin and spring replacement kit (parts 24 & 25) for the Tork Craft TCAG0230 angle grinder The spindle lock is your disc-change sidekick: press it, lock the spindle, loosen the flange nut, swap the disc, and carry on. When the lock button feels weak, won’t engage properly, or slips under torque, the usual culprits are a worn lock pin or tired spring (often after accidental engagement wh....

R 13.80

Ex VAT:R 12.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK06 UPC: 6009515877569

Repl. Auxilary Handle (26) Service Kit

Tork Craft Replacement Auxiliary Handle (26) Service Kit (TCAG0230-SK06) At a Glance: Replacement side (auxiliary) handle for the Tork Craft TCAG0230 angle grinder – part 26 An angle grinder is all speed and torque — and that means your grip matters. The auxiliary (side) handle gives you the leverage and stability needed for controlled starts, cleaner lines, and safer handling when the disc bites or the load changes suddenly. If your side handle is missing, cracked, or won’t tighten proper..

R 17.94

Ex VAT:R 15.60

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK07 UPC: 6009515877576

Repl. Bearing & Bush (29/37/40) Service Kit

Tork Craft Repl. Bearing & Bush (29/37/40) Service Kit (TCAG0230-SK07) At a Glance: Replacement bearing and bush kit (parts 29, 37 & 40) for the Tork Craft TCAG0230 angle grinder Bearings and bushes are the quiet precision parts that keep your grinder’s rotating components aligned while the tool does loud, dusty work. When these support parts wear, you’ll often feel extra vibration, hear roughness from the gear head, or notice unwanted play that makes the grinder harder to control.....

R 125.94

Ex VAT:R 109.51

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK08 UPC: 6009515877583

Repl. Armature & Magnetic Ring (27/33/34) Service Kit

Tork Craft Repl. Armature & Magnetic Ring (27/33/34) Service Kit (TCAG0230-SK08) At a Glance: Replacement armature (rotor) and magnetic ring kit (parts 27, 33 & 34) for the Tork Craft TCAG0230 angle grinder When an angle grinder starts losing punch, running unevenly, or throwing more sparks than a New Year’s braai, the motor internals are often the culprit. The Tork Craft TCAG0230-SK08 Repl. Armature & Magnetic Ring Service Kit replaces the key rotating motor components referen....

R 800.34

Ex VAT:R 695.95

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK09 UPC: 6009515877590

Bearing Cover & Baffle (30/31/32/36) Service Kit

Tork Craft Bearing Cover & Baffle (30/31/32/36) Service Kit (TCAG0230-SK09) At a Glance: Bearing cover and baffle component kit (parts 30, 31, 32 & 36) for the Tork Craft TCAG0230 angle grinder Inside a grinder, bearings don’t fail only from load — they fail from dust, heat and contamination sneaking in over time. Covers and baffles play an important role by shielding sensitive areas and guiding internal airflow and debris away from critical components. If these parts are cracked, ....

R 5.52

Ex VAT:R 4.80

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK10 UPC: 6009515877606

Stator With Stopper Set (38/39) Service Kit

Tork Craft Stator With Stopper Set (38/39) Service Kit (TCAG0230-SK10) At a Glance: Replacement stator (field coil) with stopper set (parts 38 & 39) for the Tork Craft TCAG0230 angle grinder The stator is the stationary part of the motor that creates the magnetic field which drives the armature. If your grinder is losing power, running hot, tripping, or showing classic electrical failure symptoms (burning smell, inconsistent running, excessive sparking), the stator windings may be dama....

R 318.78

Ex VAT:R 277.20

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK11 UPC: 6009515877613

Housing Kit Compl. (41-43/50/54/56/61) Service Kit

Tork Craft Housing Kit Compl. (41-43/50/54/56/61) Service Kit (TCAG0230-SK11) At a Glance: Complete housing component kit (parts 41–43, 50, 54, 56 & 61) for the Tork Craft TCAG0230 angle grinder The housing of an angle grinder is more than a shell — it’s the structure that holds the motor aligned, protects wiring from dust and strain, supports the switch area, and gives you a solid, safe grip. If the casing is cracked from impact, screw posts are broken, threads are stripped, or the ho....

R 175.95

Ex VAT:R 153.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK12 UPC: 6009515877620

Brush Holder Set Compl. (44-46/48/49) Service Kit

Tork Craft Brush Holder Set Compl. (44-46/48/49) Service Kit (TCAG0230-SK12) At a Glance: Complete brush holder set (parts 44–46, 48 & 49) for the Tork Craft TCAG0230 angle grinder Carbon brushes can only do their job properly if the brush holders keep them aligned, secure and making consistent contact with the spinning armature. When holders crack, loosen, or the seating/spring action becomes unreliable, you may get intermittent power, excessive sparking, cutting out under load, or a ....

R 69.00

Ex VAT:R 60.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK13 UPC: 6009515877637

Soft Start Switch Set (53/55) Service Kit

Tork Craft Soft Start Switch Set (53/55) Service Kit (TCAG0230-SK13) At a Glance: Replacement soft start switch component set (parts 53 & 55) for the Tork Craft TCAG0230 angle grinder Soft start is the feature that stops a grinder from launching itself out of your hands the moment you pull the switch. It ramps up speed more gently, improving control and reducing mechanical stress on gears and bearings. When the soft start switch components fail, you may experience a harsh “jerk” at sta....

R 307.05

Ex VAT:R 267.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK14 UPC: 6009515877644

Rotation Button Set (51/52) Service Kit

Tork Craft Rotation Button Set (51/52) Service Kit (TCAG0230-SK14) At a Glance: Replacement rotation button component set (parts 51 & 52) for the Tork Craft TCAG0230 angle grinder Control buttons and selectors take more abuse than we admit: dust gets everywhere, plastic takes knocks, and one hard drop can turn a crisp button into a sticky, unreliable nuisance. The Tork Craft TCAG0230-SK14 Rotation Button Set replaces the components referenced as parts 51 and 52, restoring proper button....

R 13.80

Ex VAT:R 12.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK15 UPC: 6009515877651

Carbon Brush Set (47) Service Kit

Tork Craft Carbon Brush Set (47) Service Kit (TCAG0230-SK15) At a Glance: Replacement carbon brush set for the Tork Craft TCAG0230 angle grinder – part 47 Carbon brushes are wearable service items — they deliver electricity into the spinning armature, and over time they simply get shorter, weaker and less consistent. When brushes are worn, you’ll often notice reduced power, intermittent cutting out, a “surging” feel under load, or excessive sparking at start-up. The Tork Craft TCAG0230-SK1..

R 96.60

Ex VAT:R 84.00

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK16 UPC: 6009515877668

Repl. Cord & Clamp Set (57-60) Service Kit

Tork Craft Repl. Cord & Clamp Set (57-60) Service Kit (TCAG0230-SK16) At a Glance: Replacement power cord and clamp/strain relief set (parts 57–60) for the Tork Craft TCAG0230 angle grinder A grinder cord lives a hard life: it gets tugged, twisted, dragged over sharp edges and sometimes “mysteriously” starts cutting out right when you need the tool most. If your TCAG0230 loses power when the cord moves, shows insulation damage, or the strain relief is loose or broken, it’s time for a p....

R 128.34

Ex VAT:R 111.60

Contact us

Stockist

Stock: In Stock Model: TCAG0230-SK17 UPC: 6009515877675

Repl. Two Pin Flange Wrench & Hex Wrench (62/63)

Tork Craft Repl. Two Pin Flange Wrench & Hex Wrench (62/63) (TCAG0230-SK17) At a Glance: Two pin flange wrench (pin spanner) and hex wrench set for disc changes and adjustments on the Tork Craft TCAG0230 – parts 62 & 63 Angle grinders are brilliant tools… right up until you need to change a disc and the spanner has disappeared into the same alternate dimension as 10mm sockets. The Tork Craft TCAG0230-SK17 Replacement Two Pin Flange Wrench & Hex Wrench set brings your grinder’s ....

R 69.00

Ex VAT:R 60.00

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK01 UPC: 6009515888312

Nut & Flange Kit (1-2/ 4-5) For Tccs0185

Tork Craft Nut & Flange Kit (1-2 / 4-5) Service Kit (TCCS0185-SK01) At a Glance: Retaining nut and flange set (parts 1–2 and 4–5) for secure disc mounting on the Tork Craft TCCS0185 cut-off saw On a cut-off saw, the nut and flange set is what keeps the cutting disc centred, clamped and stable at speed. If the flanges are worn, the nut is damaged, or the faces no longer clamp smoothly, you can end up with disc wobble, vibration, uneven cuts and unsafe retention. The Tork Craft TCCS0185-....

R 75.91

Ex VAT:R 66.01

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK02 UPC: 6009515888329

Screw & Lever Kit (6-7) For Tccs0185

Tork Craft Screw & Lever Kit (6-7) Service Kit (TCCS0185-SK02) At a Glance: Replacement screw and lever set (parts 6 & 7) for adjustment/locking functions on the Tork Craft TCCS0185 cut-off saw Cut-off saws live in a world of vibration, metal dust and “just tighten it a bit more”… which is exactly how screws get stripped and levers get bent or snapped. When a locking lever won’t hold, or a screw no longer tightens securely, your adjustments become sloppy — and that can affect both ....

R 23.15

Ex VAT:R 20.13

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK03 UPC: 6009515888336

Guard & Safety Cover (8) For Tccs0185

Tork Craft Guard & Safety Cover (8) Service Kit (TCCS0185-SK03) At a Glance: Replacement guard and safety cover (part 8) for the Tork Craft TCCS0185 cut-off saw On a cut-off saw, the guard is your first line of defence. It helps direct sparks and debris away from you, provides a protective barrier around the cutting disc, and reduces exposure if something goes wrong. If the guard is cracked, bent, missing, or no longer closes/positions correctly, the saw becomes risky to use (and often....

R 181.45

Ex VAT:R 157.78

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK04 UPC: 6009515888343

Spindle/gear & Bearing Kit (9-19) Fir Tccs0185

Tork Craft Spindle Gear & Bearing Kit (9-19) Service Kit (TCCS0185-SK04) At a Glance: Spindle gear and bearing component kit (parts 9–19) for the Tork Craft TCCS0185 cut-off saw On a cut-off saw, the spindle and gear train take serious load every time the disc bites into material. When bearings wear or gears start running out of alignment, you’ll typically hear harsh gearbox noise, feel extra vibration, or notice play that affects cutting accuracy and disc stability. The Tork Craft TCC....

R 365.68

Ex VAT:R 317.98

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK05 UPC: 6009515888350

Shaft Lock (30-31) For Tccs0185

Tork Craft Shaft Lock (30-31) Service Kit (TCCS0185-SK05) At a Glance: Shaft lock component kit (parts 30 & 31) for secure disc changes on the Tork Craft TCCS0185 cut-off saw The shaft lock is your disc-change sidekick: lock the spindle, loosen the retaining nut, swap the disc, tighten, and carry on. When the lock won’t engage properly, feels weak, or slips under torque, disc changes become frustrating and unsafe. The Tork Craft TCCS0185-SK05 Shaft Lock Service Kit replaces the compone....

R 56.48

Ex VAT:R 49.11

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK06 UPC: 6009515888367

Complex Armature & Bearing Kit (28/32-36) For Tccs0185

Tork Craft Complex Armature & Bearing Kit (28/32-36) Service Kit (TCCS0185-SK06) At a Glance: Complex armature (rotor) and bearing component kit (parts 28 and 32–36) for the Tork Craft TCCS0185 cut-off saw When a cut-off saw starts losing punch, running rough, or sounding like it’s chewing gravel, the rotating motor components are often the culprit. The armature (rotor) is the spinning heart of the motor, and the bearings keep that rotation smooth and correctly aligned. If bearings are....

R 728.57

Ex VAT:R 633.54

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK07 UPC: 6009515888374

Lever Plate & Stop Collor (24-28) For Tccs0185

Tork Craft Lever Plate & Stop Collar (24-28) Service Kit (TCCS0185-SK07) At a Glance: Lever plate and stop collar component kit (parts 24–28) for the Tork Craft TCCS0185 cut-off saw In a cut-off saw, the “small linkage bits” do big jobs. Lever plates guide motion and transfer force where it’s needed, while a stop collar helps locate parts and limit travel so the mechanism returns to the right position every time. When these parts wear, bend or loosen, the saw can feel sloppy, inconsist....

R 53.69

Ex VAT:R 46.69

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK08 UPC: 6009515888381

Fanshroud & Screws (37-38) For Tccs0185

Tork Craft Fan Shroud & Screws (37-38) Service Kit (TCCS0185-SK08) At a Glance: Replacement fan shroud and mounting screws (parts 37 & 38) for the Tork Craft TCCS0185 cut-off saw Motor cooling on a cut-off saw is not optional — it’s what keeps the tool alive when you’re making repeated cuts and the dust is flying. The fan shroud directs airflow where it’s needed and helps keep debris out of sensitive areas. If the shroud is cracked, loose, missing, or the screws are stripped, airfl....

R 32.41

Ex VAT:R 28.18

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK09 UPC: 6009515888398

Startor (39) For Tccs0185

Tork Craft Stator (39) Service Kit (TCCS0185-SK09) At a Glance: Replacement stator (field coil) for the Tork Craft TCCS0185 cut-off saw – part 39 The stator is the stationary core of the motor that creates the magnetic field which drives the armature. When a stator fails, the symptoms can be dramatic: weak power, tripping, excessive heat, burning smell, inconsistent running, or a saw that simply won’t start. The Tork Craft TCCS0185-SK09 Stator replaces the component referenced as part 39, ..

R 553.60

Ex VAT:R 481.39

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK10 UPC: 6009515888404

Tool Housing Kit (40-41/55-56/58-61) For Tccs0185

Tork Craft Tool Housing Kit (40-41/55-56/58-61) Service Kit (TCCS0185-SK10) At a Glance: Replacement tool housing component kit (parts 40–41, 55–56 and 58–61) for the Tork Craft TCCS0185 cut-off saw The housing on a cut-off saw does more than make it look like a tool — it keeps the motor aligned, protects wiring from dust and strain, supports the switch area, and gives you a solid grip while the disc is doing violent physics. If the casing is cracked from impact, screw posts are broken, th..

R 440.66

Ex VAT:R 383.18

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK11 UPC: 6009515888411

Cord Set Compl. (47-49/57) For Tccs0185

Tork Craft Cord Set Compl. (47-49/57) Service Kit (TCCS0185-SK11) At a Glance: Complete replacement cord set (parts 47–49 and 57) for the Tork Craft TCCS0185 cut-off saw A cut-off saw cable gets dragged, tugged, kinked and occasionally “tested” against sharp edges and hot sparks. When the cord is damaged or internal connections become loose, you can get intermittent power, cutting out under load, tripping, or a very unsafe shock hazard. The Tork Craft TCCS0185-SK11 Cord Set Complete replac..

R 257.36

Ex VAT:R 223.79

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK12 UPC: 6009515888428

Switch Capacitor Kit (42-46) For Tccs0185

Tork Craft Switch Capacitor Kit (42-46) Service Kit (TCCS0185-SK12) At a Glance: Replacement switch and capacitor component kit (parts 42–46) for the Tork Craft TCCS0185 cut-off saw When a cut-off saw starts behaving like it has moods — cutting out under load, refusing to start, or running inconsistently — the switch and related electrical components are often on the suspect list. Capacitors (where used in the circuit) help stabilise electrical behaviour, while the switch is the main contr..

R 99.98

Ex VAT:R 86.94

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK13 UPC: 6009515888435

Brush Holder (52/54) For Tccs0185

Tork Craft Brush Holder (52/54) Service Kit (TCCS0185-SK13) At a Glance: Replacement brush holder components (parts 52 & 54) for the Tork Craft TCCS0185 cut-off saw Carbon brushes can only do their job properly if the brush holders keep them aligned, secure and making consistent contact with the spinning armature. When holders crack, loosen, or the seating action becomes unreliable, you may get intermittent power, cutting out under load, or excessive sparking that rapidly wears the com....

R 37.96

Ex VAT:R 33.01

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK14 UPC: 6009515888442

Carbon Brush (53) For Tccs0185

Tork Craft Carbon Brush (53) Service Kit (TCCS0185-SK14) At a Glance: Replacement carbon brush for the Tork Craft TCCS0185 cut-off saw – part 53 Carbon brushes are consumable service items — they deliver electricity into the spinning armature, and over time they simply wear down. When a brush is worn, weak or damaged, you’ll often notice reduced power, intermittent cutting out, a “surging” feel under load, or excessive sparking at start-up. The Tork Craft TCCS0185-SK14 Carbon Brush replace..

R 42.58

Ex VAT:R 37.03

Contact us

Stockist

Stock: In Stock Model: TCCS0185-SK15 UPC: 6009515888459

Complete Base (62-67) For Tccs0185

Tork Craft Complete Base (62-67) Service Kit (TCCS0185-SK15) At a Glance: Complete base component kit (parts 62–67) for the Tork Craft TCCS0185 cut-off saw The base is the unsung hero of a cut-off saw. It’s what keeps the machine stable, supports the workpiece, and holds alignment so your cuts stay straight and controlled. If the base is cracked, bent from a drop, worn at key contact .s, or no longer sits flat, the saw can wobble, bind, and produce inconsistent cuts — which is both frustra..

R 327.72

Ex VAT:R 284.97

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK01 UPC: 6009515897567

Base & Feet Kit (1-3) For Tccs0355

Tork Craft Base & Feet Kit (1-3) For TCCS0355 At a Glance: Replacement base & feet kit (parts 1–3) designed for the Tork Craft TCCS0355 cut-off saw When a cut-off saw loses its footing, everything feels sketchy — alignment suffers, vibration increases, and accuracy goes out the window. The Tork Craft TCCS0355-SK01 Base & Feet Kit restores the stable foundation of your TCCS0355 2700W 355mm cut-off saw, bringing it back to that solid, confidence-inspiring stance it was built for.....

R 510.08

Ex VAT:R 443.55

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK02 UPC: 6009515897574

Vice Stand Compl. (2/4-19) For Tccs0355

Tork Craft Vice Stand Compl. (2/4-19) For TCCS0355 At a Glance: Complete vice/stand assembly replacement (parts 2 and 4–19) for the Tork Craft TCCS0355 cut-off saw A cut-off saw is only as good as its grip. If the vice is worn, bent, or simply not clamping square anymore, your workpiece can creep, chatter, and ruin an otherwise perfect cut. The Tork Craft TCCS0355-SK02 Vice Stand Compl. is the proper replacement assembly for the TCCS0355, bringing back firm clamping, better control, and th..

R 298.09

Ex VAT:R 259.21

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK03 UPC: 6009515897581

Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For Tccs0355

Tork Craft Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For TCCS0355 At a Glance: Support bracket complete assembly (parts 2, 4, 12, 20–28, 30–38, 89–90) for the Tork Craft TCCS0355 When a cut-off saw starts feeling “loose”, misaligned, or inconsistent, the culprit is often the supporting bracketry that keeps everything sitting where it should. The Tork Craft TCCS0355-SK03 Support Bracket Compl. is the correct replacement assembly for the TCCS0355, covering the support bracket compone..

R 505.46

Ex VAT:R 439.53

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK04 UPC: 6009515897598

Corbon Brushes (45) For Tccs0355

Tork Craft Carbon Brushes (45) For TCCS0355 At a Glance: Replacement carbon brush set (part 45) designed for the Tork Craft TCCS0355 cut-off saw Carbon brushes are the quiet little workhorses inside your motor — and when they wear down, the tool starts acting weird: power drops, arcing increases, and the motor may cut in and out (or refuse to start at all). The Tork Craft TCCS0355-SK04 Carbon Brushes are the correct replacement set for the TCCS0355 cut-off saw, restoring solid electrical c..

R 47.21

Ex VAT:R 41.05

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK05 UPC: 6009515897604

Carbon Brush Holder (44/46) For Tccs0355

Tork Craft Carbon Brush Holder (44/46) For TCCS0355 At a Glance: Replacement carbon brush holder components (parts 44 and 46) for the Tork Craft TCCS0355 cut-off saw New brushes won’t help much if the brush holder is cracked, worn, or letting the brush bind instead of sliding freely. The Tork Craft TCCS0355-SK05 Carbon Brush Holder kit replaces the brush holder components (parts 44 and 46) that guide and support the carbon brushes in your TCCS0355 cut-off saw. It’s the right repair when th..

R 54.61

Ex VAT:R 47.49

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK06 UPC: 6009515897611

Tool Housing Kit Compl. (40-43/47/80/81/85-87) For Tccs0355

Tork Craft Tool Housing Kit Compl. (40-43/47/80/81/85-87) For TCCS0355 At a Glance: Tool housing kit complete assembly (parts 40–43, 47, 80, 81, 85–87) for the Tork Craft TCCS0355 cut-off saw The housing on a cut-off saw isn’t just “plastic around the motor” — it’s the protective shell that keeps dust where it belongs, supports internal components, and gives you safe, confident handling. If your TCCS0355 housing is cracked, stripped at the screw .s, or no longer closing up properly, the to..

R 428.62

Ex VAT:R 372.71

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK07 UPC: 6009515897628

Switch Compl. (29/82/88) For Tccs0355

Tork Craft Switch Compl. (29/82/88) For TCCS0355 At a Glance: Switch complete replacement assembly (parts 29, 82 and 88) for the Tork Craft TCCS0355 cut-off saw When a cut-off saw starts playing mind-games — won’t start, starts only if you “wiggle it”, or cuts out mid-cut — the switch assembly is often the guilty party. The Tork Craft TCCS0355-SK07 Switch Compl. replaces the switching components (parts 29, 82 and 88) for the TCCS0355, restoring dependable control and helping ensure the too..

R 95.35

Ex VAT:R 82.91

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK08 UPC: 6009515897635

Cord & Clamp Kit (53/77/83/84) For Tccs0355

Tork Craft Cord & Clamp Kit (53/77/83/84) For TCCS0355 At a Glance: Replacement cord and clamp/strain relief kit (parts 53, 77, 83 and 84) for the Tork Craft TCCS0355 cut-off saw A cut-off saw draws serious power, which means the power cord and its strain relief take real abuse—dragged across floors, snagged around benches, and flexed thousands of times. When the cord is nicked, loose, or the clamp is cracked, you’re not just dealing with inconvenience; you’re dealing with a safety ris....

R 259.21

Ex VAT:R 225.40

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK09 UPC: 6009515897642

Motor & Gearbox Compl. (50-52/54-72) For Tccs0355

Tork Craft Motor & Gearbox Compl. (50-52/54-72) For TCCS0355 At a Glance: Motor and gearbox complete assembly (parts 50–52 and 54–72) for the Tork Craft TCCS0355 cut-off saw When a cut-off saw loses its punch, starts sounding rough, or develops that unpleasant “grindy” feeling under load, the problem is often deeper than a blade or a brush set. The Tork Craft TCCS0355-SK09 Motor & Gearbox Compl. is the complete drive assembly replacement for the TCCS0355, covering the motor and gea....

R 3,811.31

Ex VAT:R 3,314.18

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK10 UPC: 6009515897659

Protective Cover & Active Cover (73/74) For Tccs0355

Tork Craft Protective Cover & Active Cover (73/74) For TCCS0355 At a Glance: Replacement protective cover and active cover set (parts 73 and 74) for the Tork Craft TCCS0355 cut-off saw On a cut-off saw, the guard isn’t optional “extra plastic” — it’s the line between controlled cutting and flying debris doing interpretive dance around your workshop. The Tork Craft TCCS0355-SK10 Protective Cover & Active Cover set replaces the guard cover components (parts 73 and 74) on your TCCS035....

R 24.99

Ex VAT:R 21.73

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK11 UPC: 6009515897666

Flange Clamp Set (75/78/79) For Tccs0355

Tork Craft Flange Clamp Set (75/78/79) For TCCS0355 At a Glance: Replacement flange clamp set (parts 75, 78 and 79) for correct disc clamping on the Tork Craft TCCS0355 If the disc isn’t clamped properly, everything goes sideways—literally. Worn, damaged or mismatched flanges can cause wobble, uneven wear, extra vibration and risky cutting behaviour. The Tork Craft TCCS0355-SK11 Flange Clamp Set replaces the disc clamping components (parts 75, 78 and 79) on your TCCS0355 cut-off saw, resto..

R 111.09

Ex VAT:R 96.60

Contact us

Stockist

Stock: In Stock Model: TCCS0355-SK12 UPC: 6009515897673

Spring Lock Pin Kit (48/49) For Tccs0355

Tork Craft Spring Lock Pin Kit (48/49) For TCCS0355 At a Glance: Replacement spring and lock pin kit (parts 48 and 49) for the Tork Craft TCCS0355 cut-off saw That lock pin might be small, but it has a big job: keeping the moving parts of your cut-off saw secure when you need it locked in place. If the pin is bent, the spring has lost tension, or the mechanism isn’t engaging cleanly, the saw can become awkward to store, transport, or set up safely. The Tork Craft TCCS0355-SK12 Spring Lock ..

R 23.14

Ex VAT:R 20.12

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK22 UPC: 6009515880408

Control Panel & Motor Switch (34/37/38) Stand Service Kit

Tork Craft Control Panel & Motor Switch (34/37/38) Stand Service Kit At a Glance: Replacement control panel and motor switch components (parts 34, 37 and 38) for the Tork Craft TCDM0035PM stand When a stand’s controls start acting up—intermittent switching, inconsistent starts, or a switch that feels “tired” and unpredictable—your entire setup becomes the weak link. The Tork Craft TCDM0035PM-SK22 Control Panel & Motor Switch service kit replaces the key control and switching compon....

R 679.97

Ex VAT:R 591.28

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK23 UPC: 6009515880415

Repl. Handle ( 15-17) Stand Service Kit

Tork Craft Repl. Handle (15-17) Stand Service Kit At a Glance: Replacement handle components (parts 15–17) for the Tork Craft TCDM0035PM stand The handle on a drill stand does more than just “move the head up and down” — it’s your control lever for precision, pressure and safety. If the handle is bent, loose, cracked, or missing parts, you lose smooth feed control and accuracy suffers fast. The Tork Craft TCDM0035PM-SK23 Repl. Handle stand service kit replaces the handle components (parts ..

R 511.65

Ex VAT:R 444.91

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK24 UPC: 6009515880422

Pinion Shaft & Key (13/14) Stand Service Kit

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlle....

R 149.88

Ex VAT:R 130.33

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK25 UPC: 6009515880439

Bearing & Gear Set (7-12) Stand Service Kit

Tork Craft Bearing & Gear Set (7-12) Stand Service Kit At a Glance: Bearing and gear set service kit (parts 7–12) for smoother, more accurate movement on the Tork Craft TCDM0035PM stand A drill stand should feel like a controlled machine, not a shopping trolley with attitude. If the feed action is rough, noisy, or developing side-play, the bearings and gears in the mechanism are often worn or contaminated. The Tork Craft TCDM0035PM-SK25 Bearing & Gear Set stand service kit replaces....

R 259.88

Ex VAT:R 225.98

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK26 UPC: 6009515880446

Parameter & Control Panel (35/36/42) Stand Service Kit

Tork Craft Parameter & Control Panel (35/36/42) Stand Service Kit At a Glance: Replacement parameter and control panel components (parts 35, 36 and 42) for the Tork Craft TCDM0035PM stand When the control panel is damaged, unresponsive, or your stand’s settings stop behaving consistently, the whole setup becomes frustrating (and in some cases, unsafe). The Tork Craft TCDM0035PM-SK26 Parameter & Control Panel stand service kit replaces the panel-related components (parts 35, 36 and ....

R 307.13

Ex VAT:R 267.07

Contact us

Stockist

Stock: In Stock Model: TCDM0035PM-SK27 UPC: 6009515880453

Panel & Gasket (32/33) Stand Service Kit

Tork Craft Panel & Gasket (32/33) Stand Service Kit At a Glance: Replacement panel and gasket components (parts 32 and 33) for the Tork Craft TCDM0035PM stand Dust, vibration and workshop life have a way of turning small gaps into big problems. If your stand’s panel is cracked, missing, or the gasket has flattened and stopped sealing properly, you’re inviting dust and debris into places that really don’t want it—especially around controls and wiring. The Tork Craft TCDM0035PM-SK27 Pane....

R 187.53

Ex VAT:R 163.07

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: TCID0805-SK13 UPC: 6009515882471

Impact Drill 220v 850w Rebuild Tool.

Tork Craft Impact Drill 220V 850W Rebuild Tool (TCID0805-SK13) At a Glance: Complete rebuilt corded Impact Drill (220V, 850W) – ready for reselling This is a complete rebuilt tool—ready to plug in and get drilling. The Tork Craft TCID0805-SK13 is a rebuilt 220V Impact Drill with 850W of corded power, designed for everyday drilling tasks with the added bite of hammer action when you move onto brick and masonry. It’s a strong value option for workshops, maintenance teams, and resellers who w..

R 1,492.55

Ex VAT:R 1,297.87

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: TCID0850-SK01 UPC: 6009515882358

Gearbox Housing With Screws (3/4) S/kit

Tork Craft Gearbox Housing With Screws (3/4) Service Kit For TCID0850 At a Glance: Replacement gearbox housing with screws (parts 3 and 4) for the Tork Craft TCID0850 impact driver The gearbox housing is the impact driver’s tough little “armour shell” — it supports key drive components, keeps everything aligned, and protects the internals from workshop dust and abuse. If the housing is cracked, stripped at the screw .s, or no longer seating correctly, the tool can develop play, noise, and ..

R 77.18

Ex VAT:R 67.11