Model: AT0005-SK05
UPC: 6009515857417
AirCraft Air Drill Service Kit – Rotor & Cyl. (18/19/21-23) For AT0005 (AT0005-SK05)
At a Glance: Rotor and cylinder service kit for AirCraft AT0005 – replaces parts 18/19/21-23 to restore smooth, consistent drill performance.
When a pneumatic drill starts losing punch, running rough, or struggling to maintain speed, the usual suspects live in the motor group. The AirCraft AT0005-SK05 service kit is a targeted rotor & cylinder refresh desig....
R 226.55
Ex VAT:R 197.00
Model: AT0005-SK06
UPC: 6009515857424
AirCraft Air Drill Service Kit – Gear & Rot. Axle (25-27) For AT0005 (AT0005-SK06)
At a Glance: Gear and rotational axle service kit for AirCraft AT0005 – replaces drive components referenced as 25-27 for smooth, efficient power transfer.
When an air drill starts sounding “gritty”, slipping under load, or losing that crisp torque delivery, the drivetrain is usually crying for attention. The AirCraft AT0005-SK06 service kit is built to refresh t..
R 74.29
Ex VAT:R 64.60
Model: AT0005-SK07
UPC: 6009515857431
AirCraft Air Drill Service Kit – Gear Ring & Fixing Ring (28/30) For AT0005 (AT0005-SK07)
At a Glance: Gear ring and fixing ring service kit for AirCraft AT0005 – replaces parts 28 and 30 to keep the drivetrain tight, aligned, and smooth.
A ring gear that’s worn, chipped, or no longer sitting perfectly can turn a good air drill into a noisy, uneven, power-wasting machine. The AirCraft AT0005-SK07 service kit is designed to refresh the gear ring..
R 113.39
Ex VAT:R 98.60
Model: AT0005-SK08
UPC: 6009515857448
AirCraft Air Drill Service Kit – Chuck & Key (32-34) For AT0005 (AT0005-SK08)
At a Glance: Chuck and key service kit for AirCraft AT0005 – replaces parts 32-34 to restore strong bits grip and smooth tightening.
A worn chuck turns drilling into a constant fight—bitss slip, run off-centre, and tightening never feels quite “right”. The AirCraft AT0005-SK08 service kit replaces the chuck and key components for the AirCraft AT0005, covering referenc..
R 225.40
Ex VAT:R 196.00
Model: AT0005-SK09
UPC: 6009515857455
AirCraft Air Drill Service Kit – Rotor blades 5pc Set (20) For AT0005 (AT0005-SK09)
At a Glance: 5-piece rotor blades (vane) set for AirCraft AT0005 – replaces part 20 to bring back crisp power and smooth air-motor operation.
Rotor bladess (also called vanes) are the hardworking “muscles” inside the air motor—constantly sliding, sealing, and converting compressed air into rotation. Over time they wear down, lose sealing efficiency, and your dri..
R 24.38
Ex VAT:R 21.20
Model: AT0006
UPC: 6009515812713
Impact wrench 1/2" Drive kit
The impact wrench is used to deliver high torque to either loosen or tighten
projects in many industries from automotive repair to heavy equipment
maintenance.
In operation, a single hammer is accelerated by the motor to make contact
with the 1/2" output shaft to deliver high-impact torque as much as 310
Newton-Meter.
A compressor is required with an airflow delivery of at least 228 l/min at
6.3..
R 1,641.05
Ex VAT:R 1,427.00
Model: AT0006-SK01
UPC: 6009515856571
AirCraft Air Impact Wrench Service Kit – Bearings & Washer (4/5/7/10/27/35/42/43) For AT0006 (AT0006-SK01)
At a Glance: Bearing and washer service kit for AirCraft AT0006 – replaces multiple support/spacer parts to restore smooth rotation and correct internal alignment.
Inside an impact wrench, bearings and washers quietly do the hard work—supporting rotating assemblies, controlling end-float, and keeping everything aligned while the hammer mec..
R 49.91
Ex VAT:R 43.40
Model: AT0006-SK02
UPC: 6009515856588
AirCraft Air Impact Wrench Service Kit – Air Flow Reg. (8/10-12) For AT0006 (AT0006-SK02)
At a Glance: Air flow regulator service kit for AirCraft AT0006 – replaces parts 8 and 10-12 to bring back controlled power and stable airflow.
When an impact wrench feels inconsistent—jumping between weak and wild, refusing to dial down smoothly, or leaking air around the control area—the airflow regulator is usually the culprit. The AirCraft AT0006-SK02 ..
R 16.22
Ex VAT:R 14.10
Model: AT0006-SK03
UPC: 6009515856595
AirCraft Air Impact Wrench Service Kit – Air Inlet (5-9) For AT0006 (AT0006-SK03)
At a Glance: Air inlet service kit for AirCraft AT0006 – replaces inlet and sealing parts 5-9 to maintain airtight connections and consistent airflow.
If your impact wrench is hissing at the back end, losing power, or feeling inconsistent, the problem is often right where the air enters the tool. The AirCraft AT0006-SK03 service kit refreshes the air inlet compone..
R 25.76
Ex VAT:R 22.40
Model: AT0006-SK04
UPC: 6009515856601
AirCraft Air Impact Wrench Service Kit – Valve Kit (2-4/19/20) For AT0006 (AT0006-SK04)
At a Glance: Valve service kit for AirCraft AT0006 – replaces parts 2-4, 19 and 20 to bring back smooth, responsive airflow control.
If your impact wrench trigger feels sticky, the tool runs on after you release, or airflow seems inconsistent, the valve system is often where the trouble starts. The AirCraft AT0006-SK04 service kit is a dedicated Valve Kit fo..
R 482.43
Ex VAT:R 419.50
Model: AT0006-SK05
UPC: 6009515856618
AirCraft Air Impact Wrench Service Kit – Trigger Comp. (13-14) For AT0006 (AT0006-SK05)
At a Glance: Trigger component service kit for AirCraft AT0006 – replaces parts 13-14 for smoother trigger action and dependable control.
A tired trigger turns a great impact wrench into an annoying (and sometimes unsafe) tool—sticky engagement, inconsistent response, or a trigger that doesn’t return cleanly can slow you down fast. The AirCraft AT0006-SK05 s..
R 36.57
Ex VAT:R 31.80
Model: AT0006-SK06
UPC: 6009515856625
AirCraft Air Impact Wrench Service Kit – Oil Inlet (15-18) For AT0006 (AT0006-SK06)
At a Glance: Oil inlet service kit for AirCraft AT0006 – replaces parts 15-18 to maintain correct lubrication and protect the tool under heavy use.
Pneumatic impact tools live and die by lubrication. When the oil inlet parts are worn, blocked, or leaking, internal components run dry, heat builds up, and wear accelerates fast. The AirCraft AT0006-SK06 service kit..
R 296.70
Ex VAT:R 258.00
Model: AT0006-SK07
UPC: 6009515856632
AirCraft Air Impact Wrench Service Kit – Rear Cover & Scuff (35-40) For AT0006 (AT0006-SK07)
At a Glance: Rear cover and scuff service kit for AirCraft AT0006 – replaces parts 35-40 to restore sealing, protection, and a tight rear assembly.
The rear end of an impact wrench takes real abuse—drops, knocks, vibration, and all the grit that workshop life throws at it. When the rear cover or sealing components are worn, you can end up with air leaks..
R 268.53
Ex VAT:R 233.50
Model: AT0006-SK08
UPC: 6009515856649
AirCraft Air Impact Wrench Service Kit – Rotor Kit (28/29/31-34) For AT0006 (AT0006-SK08)
At a Glance: Rotor kit for AirCraft AT0006 – renews the air-motor core parts to bring back smooth running and dependable power.
When an impact wrench starts feeling lazy, uneven, or rough—especially after long service hours—the air motor is often where performance is being lost. The AirCraft AT0006-SK08 Rotor Kit is designed for the AirCraft AT0006 air imp..
R 108.56
Ex VAT:R 94.40
Model: AT0006-SK09
UPC: 6009515856656
AirCraft Air Impact Wrench Service Kit – Hammer & Anvil (21-26/42/43) For AT0006 (AT0006-SK09)
At a Glance: Hammer and anvil service kit for AirCraft AT0006 – replaces impact components 21-26 plus supporting parts 42/43 for restored strike power.
If an impact wrench has air and speed but no real “hit”, the hammer mechanism is usually worn, chipped, or losing proper engagement. That’s where the magic happens—the rotating mass builds energy and r..
R 251.85
Ex VAT:R 219.00
Model: AT0006-SK10
UPC: 6009515860288
AirCraft Air Impact Wrench Service Kit – Rotor bladess Set 6pc (30) For AT0006 (AT0006-SK10)
At a Glance: 6-piece rotor blades (vane) set for AirCraft AT0006 – replaces part 30 to bring back efficient motor sealing and consistent power.
Rotor bladess (vanes) are the parts inside the air motor that do the constant sliding and sealing work that turns compressed air into rotation. As they wear, the motor loses sealing efficiency and the tool start..
R 32.43
Ex VAT:R 28.20
Model: AT0006-SK11
UPC: 6009515860295
AirCraft Air Impact Wrench Service Kit – Main Housing (1/41) For AT0006 (AT0006-SK11)
At a Glance: Main housing service kit for AirCraft AT0006 – replaces the core body components (1/41) to refurbish and protect the tool.
The main housing is the backbone of an impact wrench—everything mounts to it, aligns inside it, and relies on it to stay protected while the tool hammers away. If the housing is cracked, damaged, or worn at key mounting points..
R 331.78
Ex VAT:R 288.50
Model: AT0007
UPC: 6009515812690
Die grinder kit
Professional grinder kit giving complete flexibility for most grinding and
polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Included in the kit:
10 grinding points
Ø 3.2mm colle....
R 609.50
Ex VAT:R 530.00
Model: AT0007-08
O-RING FOR AIR DIE GRINDER 1/4"....
R 28.06
Ex VAT:R 24.40
Model: AT0007-09
O-RING FOR AIR DIE GRINDER 1/4"....
R 42.32
Ex VAT:R 36.80
Model: AT0007-13
O-RING FOR AIR DIE GRINDER 1/4"....
R 56.12
Ex VAT:R 48.80
Model: AT0007-14
O-RING FOR AIR DIE GRINDER 1/4"....
R 70.15
Ex VAT:R 61.00
Model: AT0007-18
BEARING FOR AIR DIE GRINDER 1/4"....
R 208.73
Ex VAT:R 181.50
Model: AT0007-22
ROTOR blades FOR AIR DIE GRINDER 1/4"....
R 70.15
Ex VAT:R 61.00
Model: AT0007-25
WASHER FOR AIR DIE GRINDER 1/4"....
R 111.78
Ex VAT:R 97.20
Model: AT0007-28
BEARING FOR AIR DIE GRINDER 1/4"....
R 306.48
Ex VAT:R 266.50
Model: AT0007-SK01
UPC: 6009515856663
AirCraft Air Die Grinder Service Kit – O-ring & Busch (8/9/13/23/25) For AT0007 (AT0007-SK01)
At a Glance: O-ring and bush service kit for AirCraft AT0007 1/4" die grinder – replaces key sealing and support parts to prevent leaks and restore smooth operation.
A die grinder works best when it’s airtight and properly supported internally. Over time, O-rings harden or flatten, and bush components can wear—leading to air leaks, inconsisten....
R 10.81
Ex VAT:R 9.40
Model: AT0007-SK02
UPC: 6009515856670
AirCraft Air Die Grinder Service Kit – Main Housing Comp. (1/2/32) For AT0007 (AT0007-SK02)
At a Glance: Main housing component kit for AirCraft AT0007 1/4" die grinder – replaces parts 1, 2 and 32 to refurbish the tool body and restore proper alignment.
A die grinder depends on a straight, solid housing to keep the internals aligned and the air path sealed. If the body is damaged, worn at the threads, or no longer seats components properl....
R 131.10
Ex VAT:R 114.00
Model: AT0007-SK03
UPC: 6009515856687
AirCraft Air Die Grinder Service Kit – Bearings (17/26) For AT0007 (AT0007-SK03)
At a Glance: Bearing replacement kit for AirCraft AT0007 1/4" die grinder – replaces bearings 17 and 26 for smoother running and reduced vibration.
Bearings are the quiet heroes inside a die grinder. When they start to wear, you’ll often notice noise, heat, vibration, or a slight wobble that ruins control and finish quality. The AirCraft AT0007-SK03 service ki....
R 59.57
Ex VAT:R 51.80
Model: AT0007-SK04
UPC: 6009515856694
AirCraft Air Die Grinder Service Kit – Trigger Comp. (3-7) For AT0007 (AT0007-SK04)
At a Glance: Trigger component service kit for AirCraft AT0007 1/4" die grinder – replaces parts 3-7 to restore smooth throttle response and dependable control.
A die grinder is only as good as its control. If the trigger feels sticky, inconsistent, or doesn’t return cleanly, it makes precision work harder—and can be a safety risk in a busy workshop. The Ai....
R 28.52
Ex VAT:R 24.80
Model: AT0007-SK05
UPC: 6009515856700
AirCraft Air Die Grinder Service Kit – Exhaust & Air Inlet (10-12/14-16) For AT0007 (AT0007-SK05)
At a Glance: Exhaust and air inlet service kit for AirCraft AT0007 1/4" die grinder – replaces key airflow parts (10-12 and 14-16) for reliable air delivery and smooth running.
When a die grinder starts leaking at the inlet, feels restricted, or the exhaust flow seems “off”, the problem is often in the air inlet and exhaust components—thre....
R 63.48
Ex VAT:R 55.20
Model: AT0007-SK06
UPC: 6009515856717
AirCraft Air Die Grinder Service Kit – Rotar & Cylinder Comp. (18/20/22/24/25) For AT0007 (AT0007-SK06)
At a Glance: Rotor and cylinder component kit for AirCraft AT0007 1/4" die grinder – replaces core air motor parts to restore power and smoothness.
When a die grinder loses its “bitse”, the issue is often inside the air motor—wear on the rotor, cylinder, or related components reduces sealing efficiency and torque. The AirCraft AT0007....
R 128.23
Ex VAT:R 111.50
Model: AT0007-SK07
UPC: 6009515856724
AirCraft Air Die Grinder Service Kit – Collet Fixing Comp. (27-29/31) For AT0007 (AT0007-SK07)
At a Glance: Collet fixing component kit for AirCraft AT0007 1/4" die grinder – renews the collet and retaining parts for secure accessory grip and smoother, safer operation.
If your die grinder accessories slip, don’t seat properly, or you notice extra run-out (wobble), the culprit is often a worn collet or damaged fixing parts. A strong, accura....
R 95.68
Ex VAT:R 83.20
Model: AT0007-SK08
UPC: 6009515856731
AirCraft Air Die Grinder Service Kit – Collet (30) For AT0007 (AT0007-SK08)
At a Glance: Replacement collet for AirCraft AT0007 1/4" die grinder – restores proper clamping force and accurate accessory running.
The collet is the business end of a die grinder—if it’s worn, you’ll feel it immediately: accessories slip, wobble, or don’t clamp evenly. That means more vibration, less control, and a higher chance of damaging burrs and stones. The....
R 40.48
Ex VAT:R 35.20
Model: AT0007-SK09
UPC: 6009515856748
AirCraft Air Die Grinder Service Kit – Rotor bladess (21) For AT0007 (AT0007-SK09)
At a Glance: Rotor blades replacement kit for AirCraft AT0007 1/4" die grinder – refreshes the air motor’s vanes for better sealing and stronger performance.
Rotor bladess (also called vanes) are the consumable “muscle fibres” inside a pneumatic motor. As they wear, chip, or glaze over, the motor can lose sealing efficiency—leading to sluggish spin-up, lower....
R 17.71
Ex VAT:R 15.40
Model: AT0009
UPC: 6009515816582
1/3 sheet orbitsal sander - 95x175mm
The orbitsal sander, also known as a Jitterbug, makes use of 1/3 sheet
abrasives that can be securely held in place with locking clamps in the front
and back.
A dead man's throttle switch is fitted on top for safety. The sander has a
contoured palm grip that allows for one handed sanding.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar t....
R 1,145.40
Ex VAT:R 996.00
Model: AT0010
UPC: 6009515816599
Random orbitsal sander - Ø 150mm
Professional pneumatic random orbitsal sander with Ø 150mm Hook & Loop
sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 115 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Recommended replacement backing....
R 1,431.18
Ex VAT:R 1,244.50
Model: AT0010-SK01
UPC: 6009515849375
AirCraft Air Sander Service Kit O-rings (3/5/7/11/15/24/29) For Air Sander Model AT0010
At a Glance: Matched O-ring seal refresh set (plus gasket as pictured) for AirCraft AT0010 air sander servicing.
Give your AirCraft AT0010 air sander its “new tool” feel again. This service kit supplies the replacement O-rings used on key sealing points (reference positions 3, 5, 7, 11, 15, 24 and 29) to help stop air leaks, stabilise performance and kee..
R 18.75
Ex VAT:R 16.30
Model: AT0010-SK02
UPC: 6009515849382
AirCraft Air Sander Service Kit Housing Covers Top/front (2/30) For Air Sander Model AT0010
At a Glance: Replacement top and front housing covers (positions 2 and 30) to refresh protection, fit and usability on the AirCraft AT0010 air sander.
Refresh the look, feel and protection of your AirCraft AT0010 air sander with this housing cover service kit. Designed for the parts diagram reference positions 2 and 30, this kit replaces the top cove..
R 91.77
Ex VAT:R 79.80
Model: AT0010-SK03
UPC: 6009515849399
AirCraft Air Sander Service Kit Orbits Wheel Comp. (34/35/36/37/38/39-41) For Air Sander Model AT0010
At a Glance: Orbits wheel component refresh kit (positions 34–41) to bring back smooth orbits motion and consistent sanding performance on the AirCraft AT0010.
When an air sander starts vibrating oddly, sanding unevenly, or feeling “notchy”, the orbits mechanism is often the culprit. The AirCraft AT0010-SK03 service kit supplies the orbits ..
R 184.00
Ex VAT:R 160.00
Model: AT0010-SK04
UPC: 6009515849405
AirCraft AT0010 Air Sander Service Kit Bearing seat Comp. (42-46) For Air Sander Model AT0010
At a Glance: Bearing seat component kit (positions 42–46) including bearing and retaining hardware to restore smooth running on the AirCraft AT0010 air sander.
If your AirCraft AT0010 air sander starts to feel rough, noisy, or develops play in the rotating assembly, the bearing area is a prime suspect. The AT0010-SK04 service kit supplies the beari..
R 85.33
Ex VAT:R 74.20
Model: AT0010-SK05
UPC: 6009515849412
AirCraft AT0010 Air Sander Service Kit Rotor/cylinder Comp. (20-23/25/27/28) For Air Sander Model AT0010
At a Glance: Core motor refresh kit with rotor/cylinder components (positions 20–23, 25, 27 and 28) to bring back smooth power and stable running on the AirCraft AT0010.
When an air sander loses punch, starts surging, or sounds rough under load, the internal motor components are often worn or contaminated. The AirCraft AT0010-SK05 servic..
R 440.45
Ex VAT:R 383.00
Model: AT0010-SK06
UPC: 6009515849429
AirCraft AT0010 Air Sander Service Kit Trigger Comp. (4/6/8-10/18/19) For Air Sander Model AT0010
At a Glance: Trigger and throttle control refresh kit (positions 4, 6, 8–10, 18 and 19) to restore smooth actuation and dependable control on the AirCraft AT0010.
A sticky trigger, inconsistent start-up, or air leaking around the control valve can turn a great air sander into a frustration machine. The AirCraft AT0010-SK06 service kit supplies ..
R 88.09
Ex VAT:R 76.60
Model: AT0010-SK07
UPC: 6009515849436
AirCraft Air Sander Service Kit Regulator Comp. (12-14/16) For Air Sander Model AT0010
At a Glance: Regulator component kit (positions 12, 13, 14 and 16) to restore reliable speed/air flow control on the AirCraft AT0010 air sander.
When an air sander won’t hold a steady speed, feels “all-or-nothing”, or leaks air around the adjustment area, the regulator assembly usually needs attention. The AirCraft AT0010-SK07 service kit supplies the reg..
R 100.97
Ex VAT:R 87.80
Model: AT0010-SK08
UPC: 6009515849443
AirCraft Air Sander Service Kit Set Screw (31-33) For Air Sander Model AT0010
At a Glance: Replacement set screw/fastener kit (positions 31–33) to secure AT0010 assemblies and keep your air sander tight, aligned and dependable.
Fasteners take a beating on high-speed pneumatic tools—vibration, frequent servicing and repeated tightening can round out heads, strip threads or simply loosen over time. The AirCraft AT0010-SK08 service kit supplie..
R 9.32
Ex VAT:R 8.10
Model: AT0010-SK09
UPC: 6009515849450
AirCraft AT0010 Air Sander Service Kit Housing/handle (1/17) For Air Sander Model AT0010
At a Glance: Replacement housing and handle/grip set (positions 1 and 17) to restore comfort, control and durability on the AirCraft AT0010 air sander.
A solid body and comfortable grip make all the difference on a tool you hold for hours. The AirCraft AT0010-SK09 service kit replaces the housing and handle components referenced as 1 and 17 on the AT001..
R 301.30
Ex VAT:R 262.00
Model: AT0010-SK10
UPC: 6009515849467
AirCraft AT0010 Air Sander Service Kit Rotor bladess (26) For Air Sander Model AT0010
At a Glance: Replacement rotor bladess/vanes (position 26) to revive the pneumatic motor’s power and smooth running on the AirCraft AT0010 air sander.
Rotor bladess (also called vanes) are the consumable workhorses inside a pneumatic motor. As they wear, your air sander can lose power, struggle to start, or run inconsistently. The AirCraft AT0010-SK10 serv..
R 26.22
Ex VAT:R 22.80
Model: AT0010-SK11
UPC: 6009515849474
AirCraft AT0010 Air Sander Service Kit Sanding Pad (47) For Air Sander Model AT0010
At a Glance: 6" sanding pad replacement with 5/16"-24 threaded mount, rated up to 10,000 RPM for the AirCraft AT0010.
A fresh sanding pad is the quickest way to get your finish quality back on track. The AirCraft AT0010-SK11 service kit supplies the sanding pad referenced as 47 on the AT0010 parts diagram. It’s designed for the AirCraft AT0010 dual-action/ra..
R 65.78
Ex VAT:R 57.20
Model: AT0011
UPC: 6009515820336
AirCraft Air Orbitsal Sander 150mm Hook And Loop With Dust Extraction (AT0011)
At a Glance: 150mm pneumatic orbitsal sander with hook-and-loop pad and built-in dust extraction for cleaner, finer finishing.
Get a smoother finish with less mess using the AirCraft AT0011 Air Orbitsal Sander. Built around a 150mm hook-and-loop sanding pad for fast disc changes, this air-powered sander is ideal for surface preparation and finishing work where cont..
R 1,566.88
Ex VAT:R 1,362.50
Model: AT0011-38
UPC: 6009515880576
AirCraft Dust Extraction Hose For AT0011 (AT0011-38)
At a Glance: Flexible corrugated dust-extraction hose with fitted ends for a secure, practical connection to the AirCraft AT0011 system.
Keep your dust extraction working like it should with the AirCraft AT0011-38 Dust Extraction Hose, made as a replacement hose for the AirCraft AT0011 unit. This flexible, ribbed hose is designed to route airflow smoothly while handling the daily twists and t..
R 221.95
Ex VAT:R 193.00