Aircraft Compressors

In Stock Soon

Stock: In Stock Soon Model: SD42002 UPC: 6009515802059

Pressure switch - Four way, single phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Single phase Unloader connection Push-in (nylon tube) Thread: 1/4 BSP Ports: Four way Pressure rating: Max 10 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thickn..

R 613.99

Ex VAT:R 533.90

New Expected Date :

27/08/2025

Contact us

Stockist

Stock: 17 Model: SD42006 UPC: 6009515802097

PRESS.SWITCH 3 PH.4 WAY BRASS FERRULE

Pressure switch - Four way, three phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Three phase Unloader connection Brass ferrule Thread: 1/4 BSP Ports: Four way Pressure rating: Max 12.5 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thickness of ..

R 790.17

Ex VAT:R 687.10

Contact us

Stockist

Stock: 166 Model: SG BD-48 UPC: 6009515836634

AIR CANISTER CAP

Airbrush propellant cap with valve Propellant can be bought in a canister, which is handy if a compressor isn&t immediately available. This cap screws onto the canister to control the flow of air and to be able to shut it off when not in use. The cap can be used to connect to either M5 or 1/8 BSP thread airbrush hose.....

R 66.53

Ex VAT:R 57.85

Contact us

Stockist

Stock: 92 Model: SG COMP04K UPC: 6009515814144

COMPRESSOR WITH AIRBRUSH KIT AND HOSE

Compressor & Airbrush kit This quality airbrush set and the high-performance, oil-free piston compressor COMP04 offers airbrush specialists complete flexibility in all areas. Neatly equipped with a filter/water trap and regulator, making this setup a convenient option for everyone. We offer a vast range of accessories, hoses and range of airbrushes to enhance this kit even further. A quiet running airbrush compressor with auto stop function - meaning it only runs while you ....

R 3,152.32

Ex VAT:R 2,741.15

Contact us

Stockist

In Stock Soon

Stock: In Stock Soon Model: SG COMP07 UPC: 6009515814120

COMPRESSOR FOR AIRBRUSH 2CYL WITH TANK

Airbrush compressor The compressor is designed for airbrush use. It will switch off when the tank is full and will switch on during use. A filter and water trap is fitted to ensure the media in the airbrush isn&t contaminated with dust or water. The oil-less piston motor is thermally protected and is maintenance free and runs at a low noise ≤ 50dB. The airbrush compressor is designed for artists who demand a quality finish.....

R 5,531.44

Ex VAT:R 4,809.95

New Expected Date :

29/08/2025

Contact us

Stockist

COMPRESSOR & LOW PRESSURE SPRAY GUN KIT WITH HOSE

In Stock Soon

Stock: In Stock Soon Model: SG COMP08K UPC: 6009515814137

COMPRESSOR & LOW PRESSURE SPRAY GUN KIT WITH HOSE

Compressor and spray gun kit The spray gun is a low pressure spray gun, ideal to be paired with the SG777 mini compressor. Application: Suitable for interior and exterior wall painting and furniture. Included in the kit: Compressor Low pressure spray gun Hose The compressor doesn&t have an auto-off feature and will need to be switched off when not in use.....

R 2,914.45

Ex VAT:R 2,534.30

New Expected Date :

29/08/2025

Contact us

Stockist

Stock: 1 Model: SG COMPSP-02

CYLINDER FOR ALL MINI COMPRESSORS

CYLINDER FOR ALL MINI COMPRESSORS....

R 85.45

Ex VAT:R 74.30

Contact us

Stockist

Stock: 8 Model: SG COMPSP-06

REG. & FILTER FOR ALL MINI COMP 1/4 X 1/4 M

REG. & FILTER FOR ALL MINI COMP 1/4 X 1/4 M....

R 520.66

Ex VAT:R 452.75

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: SG COMPSP-07

FEET FOR SG COMP 04/05

FEET FOR SG COMP 04/05....

R 18.00

Ex VAT:R 15.65

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: SG COMPSP-10

POWER SWITCH FOR COMP 05 06 & 07

POWER SWITCH FOR COMP 05 06 & 07....

R 44.45

Ex VAT:R 38.65

Contact us

Stockist

Stock: 2 Model: SG COMPSP-15

REAR SPLINT INTEGRATION FOR COMP 05 & 07

REAR SPLINT INTEGRATION FOR COMP 05 & 07....

R 128.92

Ex VAT:R 112.10

Contact us

Stockist

Out Of Stock

Stock: Out Of Stock Model: SG777 UPC: 6009515809478

MINI COMPRESSOR

Mini compressor kit The compact compressor has an impressive airflow and pressure. Included in the kit: Compressor Hose The compressor doesn&t have an auto-off feature and will need to be switched off when not in use. For sprayfinishing, the compressor can be used with the SG472A spray gun.....

R 3,758.49

Ex VAT:R 3,268.25

Contact us

Stockist

Stock: 11 Model: SD42001 UPC: 6009515802042

PRESS.SWITCH 1 PH.1 WAY PUSH IN VALVE

Pressure switch - One way, single phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Single phase Unloader connection Push-in (nylon tube) Thread: 1/4 BSP Ports: One way Pressure rating: Max 10 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thicknes..

R 603.69

Ex VAT:R 524.95

Contact us

Stockist

Stock: 166 Model: SD42005 UPC: 6009515802080

PRESS.SWITCH 3PH.1 WAY BRASS FERRULE

Pressure switch - One way, three phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Three phase Unloader connection Brass ferrule Thread: 1/4 BSP Ports: One way Pressure rating: Max 12.5 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thickness of at..

R 778.09

Ex VAT:R 676.60

Contact us

Stockist

Stock: 3 Model: SG COMP05 UPC: 6009515814106

COMPRESSOR FOR AIRBRUSH 2CYL W/REG.& FILTER

Mini airbrush compressor The compressor is designed for airbrush use. Although it doesn&t have a tank, it will switch off when it has reached its output pressure and will switch on when in use. A filter and water trap is fitted to ensure the media in the airbrush isn&t contaminated with dust or water. The oil-less piston motor is thermally protected and is maintenance free and runs at a low noise ≤ 50dB. The airbrush compressor is designed for artists who demand a quality f..

R 4,429.86

Ex VAT:R 3,852.05

Contact us

Stockist

Stock: 5 Model: SG COMP06 UPC: 6009515814113

COMPRESSOR FOR AIRBRUSH 1CYL ON TANK 3LTR

Airbrush compressor The compressor is designed for airbrush use. It will switch off when the tank is full and will switch on during use. A filter and water trap is fitted to ensure the media in the airbrush isn&t contaminated with dust or water. The oil-less piston motor is thermally protected, has low maintenance (drain tank) and runs at a low noise ≤ 50dB. The airbrush compressor is designed for artists who demand a quality finish.....

R 3,800.64

Ex VAT:R 3,304.90

Contact us

Stockist

Stock: 9 Model: SG COMPSP-05

FRONT & REAR BEARING FOR ALL MINI COMPRESSORS

FRONT & REAR BEARING FOR ALL MINI COMPRESSORS....

R 61.53

Ex VAT:R 53.50

Contact us

Stockist

CYLINDER HEAD BOLT FOR ALL MINI COMPRESSORS

Out Of Stock

Stock: Out Of Stock Model: SG COMPSP-08

CYLINDER HEAD BOLT FOR ALL MINI COMPRESSORS

CYLINDER HEAD BOLT FOR ALL MINI COMPRESSORS....

R 10.87

Ex VAT:R 9.45

Contact us

Stockist

Stock: 17 Model: SG COMPSP-12

SOLENOID VALVE FOR COMP 05 06 & 07

SOLENOID VALVE FOR COMP 05 06 & 07....

R 546.77

Ex VAT:R 475.45

Contact us

Stockist

In Stock Soon

Stock: In Stock Soon Model: SG COMPSP-13

SAFETY VALVE FOR COMP 06 & 07

SAFETY VALVE FOR COMP 06 & 07....

R 128.40

Ex VAT:R 111.65

New Expected Date :

29/08/2025

Contact us

Stockist

Stock: 36 Model: SD42003 UPC: 6009515802066

PRESS.SWITCH 1PH.1 WAY BRASS FERRULE

Pressure switch - One way, single phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Single phase Unloader connection Brass ferrule Thread: 1/4 BSP Ports: One way Pressure rating: Max 10 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thickness of at..

R 596.74

Ex VAT:R 518.90

Contact us

Stockist

In Stock Soon

Stock: In Stock Soon Model: SD42004 UPC: 6009515802073

PRESS.SWITCH 1 PH.4 WAY BRASS FERRULE

Pressure switch - Four way, single phase The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system. Voltage: Single phase Unloader connection Brass ferrule Thread: 1/4 BSP Ports: Four way Pressure rating: Max 10 Bar Air pressure is important: Compressors need quite a bit of power to generate compressed air and it is advised to keep the electrical cable to a minimum length. A 10m cable lead should have a core thickness of ..

R 613.99

Ex VAT:R 533.90

New Expected Date :

27/08/2025

Contact us

Stockist

Stock: 96 Model: SG COMP04 UPC: 6009515814090

COMPRESSOR FOR AIRBRUSH 1 CYL. W/REG & FILTER

Mini airbrush compressor The compressor is designed for airbrush use. Although it doesn&t have a tank, it will switch off when it has reached its output pressure and will switch on when in use. A filter and water trap is fitted to ensure the media in the airbrush isn&t contaminated with dust or water. The oil-less piston motor is thermally protected and is maintenance free and runs at a low noise ≤ 50dB. The airbrush compressor is designed for artists who demand a quality f..

R 2,795.48

Ex VAT:R 2,430.85

Contact us

Stockist

Stock: 6 Model: SG COMP09 UPC: 6009515816094

AIRBRUSH COMP 1/6 HP W/HOSE & FILTER SINGLE OUTLET

Airbrush compressor The compressor is designed for airbrush use. It will switch off when the tank is full and will switch on during use. An in-line filter and water trap is supplied with the 1.7m hose to ensure the media in the airbrush isn&t contaminated with dust or water. The filter needs to be fitted directly under the airbrush. The oil-less piston motor is thermally protected and is maintenance free and runs at a low noise ≤ 50dB. The airbrush compressor is designed for ..

R 2,557.54

Ex VAT:R 2,223.95

Contact us

Stockist

Stock: 17 Model: SG COMP09K UPC: 6009515816414

COMPRESSOR KIT W/HOSE& TYRE CONNECTOR

Mini tyre inflator compressor The compressor is designed to be small and compact using a 1/4 Hp motor to be able to inflate tyres up to a max pressure of 3.5 Bar (50 Psi). The compressor is not suitable for airbrushing.....

R 2,735.97

Ex VAT:R 2,379.10

Contact us

Stockist

Stock: 2 Model: SG COMP11 UPC: 6009515824723

COMPRESSOR MINI AIR - BATTERY - NO AIRBRUSH

12V Battery airbrush compressor The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity. Suitable for airbrushes with nozzle size &O/; 0.2 - 0.5mm Auto start stop function for continuous work, will maintain pressure at an auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi continuously. Designed to be portable and fits in supplied waist bag. Battery details: 12V, 2000 mah Fully charge time: Around 4 hours..

R 2,752.47

Ex VAT:R 2,393.45

Contact us

Stockist

COMPRESSOR MINI AIR - BATTERY - CW AIRBRUSH

In Stock Soon

Stock: In Stock Soon Model: SG COMP12 UPC: 6009515824877

COMPRESSOR MINI AIR - BATTERY - CW AIRBRUSH

12V Battery airbrush compressor The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity. Suitable for airbrushes with nozzle size &O/; 0.2 - 0.5mm Auto start stop function for continuous work, will maintain pressure at an auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi continuously. Designed to be portable and fits in supplied waist bag. Battery details: 12V, 2000 mah Fully charge time: Around 4 hours..

R 2,967.98

Ex VAT:R 2,580.85

New Expected Date :

29/08/2025

Contact us

Stockist

Stock: 17 Model: SG COMP13 UPC: 6009515825393

COMP MINI AIR - BATTERY - A130 AIRBRUSH+5 X PAINTX 6 STENCILS

12V Battery airbrush compressor kit The compressor can be used for airbrushing, running from a supplied 12V battery or from mains electricity. Suitable for airbrushes with nozzle size &O/; 0.2 - 0.5mm Auto start stop function for continuous work, will maintain pressure at an auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi continuously. Designed to be portable and fits in supplied waist bag. Battery details: 12V, 2000 mah Fully charge time: Around 4 ho..

R 4,140.69

Ex VAT:R 3,600.60