Air Sander Service Kit Router/cylinder Comp.(20-23/25/27/28) For At001

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: AT0010-SK05
Weight: 0.56kg
Pack Dim: 60.00mm x 60.00mm x 60.00mm
UPC: 6009515849412

Price:

R 422.11

Ex VAT: R 367.05

Available Options

Stockist

AirCraft AT0010 Air Sander Service Kit Rotor/cylinder Comp. (20-23/25/27/28) For Air Sander Model AT0010

At a Glance: Core motor refresh kit with rotor/cylinder components (positions 20–23, 25, 27 and 28) to bring back smooth power and stable running on the AirCraft AT0010.

When an air sander loses punch, starts surging, or sounds rough under load, the internal motor components are often worn or contaminated. The AirCraft AT0010-SK05 service kit supplies the rotor and cylinder components referenced as 20, 21, 22, 23, 25, 27 and 28 on the AT0010 parts diagram (as pictured). This is the “heart surgery” kit for your AT0010—ideal for restoring smooth rotation, reliable power delivery and that crisp, controlled sanding feel you expect from a properly serviced pneumatic tool.

Standout feature: A matched set of rotor/cylinder assembly components for the AT0010—perfect for reviving motor performance without replacing the entire tool.

Extra Information

Confirm part placement using the AT0010 exploded parts diagram for reference positions 20 to 23, 25, 27 and 28.
Thoroughly clean internal passages and housings before installing new motor components—grit and moisture are the enemies of pneumatic tools.
Check related service items (O-rings, bearings and orbit components) at the same time to get the best result from a rebuild.

Pro Tip

After reassembly, add a few drops of pneumatic tool oil into the air inlet and run the sander briefly at low load—this helps protect fresh motor components and ensures smooth start-up.

Features

AT0010-specific motor components Designed for Air Sander Model AT0010 with parts aligned to reference positions 20–23, 25, 27 and 28.
Rotor/cylinder assembly parts Includes key internal motor pieces shown in the image, including bearing-supported components.
Precision-fit service parts Helps maintain correct alignment and smooth internal rotation when reassembled correctly.
Ideal for full rebuilds Best used when the tool is stripped, cleaned and re-lubricated as part of a major service.

Benefits

Restores power and smoothness Worn motor parts can sap performance—fresh components help bring the sander back to life.
More consistent speed under load Helps reduce bogging and uneven running during sanding.
Less vibration and harshness Properly aligned internal components can improve tool feel and reduce fatigue.
Extends overall tool life Rebuilding the motor can prevent secondary wear on orbit and bearing assemblies.

Safety

Wear eye, ear and dust protection when using pneumatic sanders and when servicing internal components.
Disconnect the air supply and release all pressure before disassembly.
Use correct tools and support parts properly—pressed components and circlips can slip if handled incorrectly.
After assembly, test-run the tool briefly at low load to confirm smooth operation before returning to normal sanding work.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	AT0010-SK05
Product Type	Air Sander Service Kit (Rotor/cylinder Components)
Compatible Model	Air Sander Model AT0010
Reference Positions	20 / 21 / 22 / 23 / 25 / 27 / 28
Kit Contents	Rotor/cylinder assembly components with bearings and hardware (as pictured)
Application	Internal motor rebuild to restore smooth power and reliable operation