Motor & Electronics Compl. Kit (10-18/31) For Tc20171

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 48
Model: TC20171-SK02
Weight: 0.39kg
Pack Dim: 110.00mm x 90.00mm x 60.00mm
UPC: 6009515897697

Price:

R 1,190.25

Ex VAT: R 1,035.00

Available Options

Stockist

Tork Craft Motor & Electronics Complete Kit (10-18/31) For TC20171 Impact Wrench

At a Glance: Matched motor and electronics kit for the TC20171 20V brushless impact wrench

When your Tork Craft IW450 impact wrench starts to lose power, cut out or refuse to switch on, the problem is usually deep inside the motor or electronics. The TC20171-SK02 Motor & Electronics Complete Kit (10–18/31) gives you a genuine Tork Craft replacement pack that brings the main motor and control electronics together in one service kit. Renew the heart and brain of your 20V brushless impact wrench and keep it working hard on stubborn fasteners instead of retiring a good tool.

Genuine motor and electronics service kit – parts 10–18 and 31 for TC20171

This complete kit is designed for the Tork Craft TC20171 Cordless Brushless Impact Wrench 450 Nm 20 V (IW450). It typically covers the main drive motor, electronic control module and related components identified as items 10–18 and 31 on the parts list. Replacing these parts together helps ensure the brushless drive system, speed control and protection circuitry are all working in harmony again for reliable high-torque performance.

Extra Information

These spare parts are for the Tork Craft TC20171 Cordless Brushless Impact Wrench 450 Nm 20 V (IW450) – confirm this model number on your tool before ordering.
Intended as a “motor & electronics complete kit” covering items 10–18 and 31 on the TC20171 exploded diagram.
Recommended when there is visible motor damage, burnt smell, repeated electronic cut-out or complete loss of drive.
Barcode / UPC: 6009515897697 – useful for stock control, labelling and scanning systems.
Approximate pack dimensions and gross weight can be captured separately in your admin console for shipping fields and are not listed in the specifications table.

Pro Tip

Before removing the old motor and electronics, take clear photos of all wiring connections and label each lead with masking tape. This simple step makes it much easier to plug the new components in correctly and avoids frustrating trial-and-error during reassembly.

Features

Genuine Tork Craft spare kit – Factory-specified motor and electronics for the TC20171 20V brushless impact wrench.
Covers key electrical drive parts – Includes motor and associated electronics corresponding to items 10–18 and 31.
Designed for IW450 450 Nm wrench – Matches the original brushless system used in the TC20171 impact wrench.
Pre-matched components – Motor and control electronics are supplied to work together as a set.
Service-ready pack – Ideal for a major electrical overhaul when the original internals are damaged or worn.

Benefits

Restore torque and speed: Fresh motor and electronics help recover the full 450 Nm performance of your IW450.
Fix intermittent faults: Resolve issues such as cutting out, failure to start or inconsistent trigger response.
Reduce overheating and stress: New control electronics manage current and temperature more effectively.
Extend tool life: Renew the most critical internal parts instead of replacing the complete impact wrench.
Keep the tool original: Using genuine Tork Craft spares maintains factory design and safety standards.

Safety

Always remove the 20 V battery pack from the impact wrench before opening the housing or touching any internal components.
Work on a clean, stable surface and keep small screws, clips and wiring harnesses organised as you disassemble the tool.
Do not modify or bypass any electronic protection features when fitting the new kit – this may compromise safety.
After reassembly, double-check that all wiring is secure and clear of moving parts before refitting the battery.
If you are unsure about any electrical repair work, consult a qualified technician or an authorised Tork Craft service centre.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TC20171-SK02
Product Type	Motor & Electronics Complete Service Kit
Compatible Tool Model	TC20171 Cordless Brushless Impact Wrench 450 Nm 20 V (IW450)
Key Components	Motor and associated electronics (items 10–18, 31)
System Voltage	20 V cordless platform
Typical Application	Replacement of failed or worn motor and control electronics
Pack Size	1 × motor & electronics kit