Capatance & Cabl Compl Set (33/41-44) For Pol06-2g

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 14
Model: POL06-2G-SK13
Weight: 0.32kg
Pack Dim: 213.00mm x 98.00mm x 100.00mm
UPC: 6009515898083

Price:

R 249.78

Ex VAT: R 217.20

Available Options

Stockist

Tork Craft Capacitance & Cable Complete Set (33/41–44) For POL06-2G

At a Glance: Genuine capacitor and cable set for the Tork Craft POL06-2G polisher

The Tork Craft capacitance and cable complete set (Cat No. POL06-2G-SK13) is a genuine replacement kit for the Tork Craft POL06-2G 1500 W 180 mm polisher. This set includes the key electrical components in positions 33 and 41–44, typically covering the power cable, strain relief, connector hardware and capacitor assembly. With time, cables can harden, crack or suffer internal breaks, while capacitors can deteriorate and cause poor starts or erratic running. Replacing these components as a complete kit restores a safe, reliable power feed and helps the motor start smoothly and run consistently during polishing work.

Standout feature: Matched capacitor and cable set for the POL06-2G’s electrical system

This original Tork Craft set is designed specifically for the POL06-2G, ensuring the cable length, connectors, strain relief and capacitor rating are all suited to the 1500 W motor and speed control electronics, keeping the tool within factory specifications.

Extra Information

Intended as the capacitance and cable complete set for positions 33 and 41–44 on the Tork Craft POL06-2G 1500 W 180 mm polisher spare parts diagram.
Ideal when the tool shows signs of cracked insulation, visible cable damage, poor starting or electrical faults traced to the lead or capacitor.
Packed weight approximately 0.32 kg, with typical pack dimensions of 213 mm x 98 mm x 100 mm (for logistics and storage planning).

Pro Tip

Before removing the old cable and capacitor assembly, take clear photos of the wiring layout and terminal positions. Use a suitable cable clamp and ensure the strain relief is correctly seated so the new lead cannot pull on internal connections during use.

Features

Genuine Tork Craft service kit Contains the correct capacitance and cable components for the POL06-2G polisher.
Rated for 1500 W operation Cable and capacitor are matched to the load and speed range of the POL06-2G.
Integrated strain relief Helps protect the cord entry from flexing and mechanical damage.
Direct-fit connectors Designed to match the original terminations and routing inside the housing.

Benefits

Restore Electrical Safety: Replaces aged or damaged cables and components that could pose a shock or fire risk.
Improved Starting And Running: Fresh capacitance helps the motor start reliably and run more smoothly.
Reduced Downtime: Solves common issues like intermittent power, flickering, or tripping due to faulty leads or capacitors.
Cost-Effective Refurbishment: Extends the life of your POL06-2G without the expense of a complete new machine.

Safety

Always disconnect the polisher from the power supply before working on the cable, capacitor or any internal wiring.
Only suitably competent persons should carry out electrical repairs; if in doubt, use an authorised service centre.
After fitting the new set, check that the cable clamp and strain relief are fully tightened and that no wires are pinched.
Before returning the tool to service, perform a function test and visual inspection, and where required have the tool electrically tested.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	POL06-2G-SK13
Product Type	Polisher service kit – capacitance and cable complete set
Compatibility	Tork Craft POL06-2G 1500 W 180 mm polisher
Positions	Components 33, 41–44 in the POL06-2G spare parts diagram
Barcode (UPC)	6009515898083