Armature Front Bearing & Srews (10/21-23) For Pol06-2g

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 21
Model: POL06-2G-SK10
Weight: 0.03kg
Pack Dim: 78.00mm x 60.00mm x 11.00mm
UPC: 6009515898052

Price:

R 29.96

Ex VAT: R 26.05

Available Options

Stockist

Tork Craft Armature Front Bearing & Screws (10–23) For POL06-2G

At a Glance: Genuine armature front bearing and screws kit for the Tork Craft POL06-2G polisher

The Tork Craft armature front bearing and screws kit (Cat No. POL06-2G-SK10) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher. The front bearing supports the nose of the armature, while the matching screws keep the bearing securely clamped in position. When the bearing wears or the fasteners are damaged, you may notice increased noise, play at the spindle or rough running. Replacing these components together with this original kit restores smooth, accurate support at the front of the motor, helping your POL06-2G run quieter, cooler and more reliably under load.

Standout feature: Matched front bearing and screw kit for POL06-2G armature support

Supplied as a dedicated POL06-2G service kit, the front bearing and screws are dimensioned to work together, ensuring proper fit, secure mounting and long-term durability at the high speeds and loads typical of professional polishing.

Extra Information

Intended as the armature front bearing and screws replacement kit (positions 10 and 21–23) for the Tork Craft POL06-2G polisher.
Recommended when there is noticeable movement at the backing pad, excessive front-end noise or visible wear around the original bearing.
UPC: 6009515898052 – useful for ordering, stock control and barcode-based systems.

Pro Tip

When fitting the new front bearing, clean the bore and shaft carefully and check for scoring or wear. Press the bearing into place using a suitable drift or press tool, then use the supplied screws and tighten them evenly to avoid misalignment and premature bearing failure.

Features

Genuine Tork Craft kit Contains the correct front armature bearing and screws for the POL06-2G polisher.
Precision front support Bearing is sized to support the armature nose accurately inside the gearbox section.
Matched fixing screws Screws are designed to clamp the bearing securely without distorting the housing.
Durable construction Built to handle the heat, load and vibration of a 1500W 180mm polisher.

Benefits

Smoother Operation: Helps eliminate play and grinding noises caused by a worn front bearing.
Extended Tool Life: Correct support reduces stress on the armature, stator and gearbox components.
Improved Finish Quality: A smoother-running spindle makes it easier to achieve an even polishing result.
Cost-Effective Maintenance: Refreshing the bearing and screws can postpone the need for a full tool replacement.

Safety

Always disconnect the polisher from the power supply before opening the housing or working on the armature and bearings.
Wear eye, ear and dust protection when testing and operating the tool after repairs.
Ensure the new bearing is correctly seated, the screws are tightened to a secure, even torque and all guards are refitted before use.
After reassembly, run the polisher at no-load speed to check for abnormal noise or vibration before starting work.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	POL06-2G-SK10
Product Type	Polisher service kit – armature front bearing and screws
Compatibility	Tork Craft POL06-2G 1500W 180mm polisher
Positions	Components 10, 21–23 in the POL06-2G spare parts diagram
Function	Supports and secures the front of the armature in the gearbox area
Application	Maintenance and repair of the POL06-2G motor support system
Pack Size	Sold as a complete bearing and screw kit