Brush Holder Set Compl. (39/40/46/47) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 198
Model: TCAG0115-SK12
Weight: 0.02kg
Pack Dim: 80.00mm x 60.00mm x 20.00mm
UPC: 6009515877453

Price:

R 51.06

Ex VAT: R 44.40

Available Options

Stockist

Tork Craft Brush Holder Set Compl. (39/40/46/47) Service Kit (TCAG0115-SK12)

At a Glance: Complete brush holder set (parts 39, 40, 46 & 47) for the Tork Craft TCAG0115 angle grinder

Carbon brushes do the dirty work of delivering current into a spinning armature, but they can only do it properly if the brush holders are secure, aligned, and electrically sound. When brush holders crack, loosen, or their springs and seating points wear out, you’ll often see intermittent power, excessive sparking, cutting-out under load, or a grinder that runs “on and off” like it’s haunted. The Tork Craft TCAG0115-SK12 Brush Holder Set Complete replaces the brush holder component group referenced as parts 39, 40, 46 and 47, helping restore consistent brush contact and stable motor operation on your TCAG0115.

Stable brush alignment = smoother running and less sparking

Designed for the Tork Craft TCAG0115 platform, this kit is ideal during motor servicing or after brush-related faults. Fit the correct brush holders, check the brushes and commutator condition, and you’ll often solve those frustrating “random cut-out” problems in one clean repair.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
Recommended: Inspect/replace the carbon brushes at the same time if they are near wear limits.
Check the commutator: Heavy burning, pitting or deep grooves may indicate the armature needs attention.
Keep it clean: Carbon dust build-up can cause tracking and poor electrical contact — clean carefully during service.

Pro Tip

After fitting new brush holders (and brushes), run the grinder no-load for 1–2 minutes to let the brushes bed in. A smooth, even sound and moderate, consistent sparking at start-up is normal — heavy arcing or rapid heating is a sign to stop and re-check alignment.

Features

Complete brush holder assembly: Replaces the brush holder set used to support and guide carbon brushes.
Parts reference match: Covers parts 39, 40, 46 and 47 as per the service diagram references.
Improves brush seating: Helps maintain correct pressure and alignment for proper commutation.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0115 angle grinder.

Benefits

More reliable power: Consistent brush contact helps reduce cutting-out and intermittent running.
Reduced arcing and wear: Correct alignment can lower excessive sparking and slow commutator/brush wear.
Cleaner servicing outcome: Ideal when cracked or loose holders make a brush replacement ineffective.

Safety

Wear eye protection and a dust mask when working with carbon dust and internal debris.
Disconnect power before opening the tool or fitting any spare parts.
Ensure springs, holders and wiring are seated correctly — misalignment can cause sparking, overheating or motor failure.
After reassembly, confirm the spindle rotates freely and the guard is correctly fitted before use.
Perform a no-load test run in a safe area and stop immediately if you see heavy arcing, smell burning or hear abnormal rubbing.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK12
Product Type	Spare Part Service Kit
Component Group	Brush Holder Set Complete
Parts Reference	39, 40, 46 & 47
Compatible Tool Model	TCAG0115