Stator With Stopper Set (33-36) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 94
Model: TCAG0115-SK10
Weight: 0.42kg
Pack Dim: 90.00mm x 68.00mm x 63.00mm
UPC: 6009515877439

Price:

R 204.93

Ex VAT: R 178.20

Available Options

Stockist

Tork Craft Stator With Stopper Set (33-36) Service Kit (TCAG0115-SK10)

At a Glance: Stator (field coil) replacement kit with stopper set (parts 33–36) for the Tork Craft TCAG0115 angle grinder

The stator is the stationary “power field” of an angle grinder’s motor — the part that helps drive the armature and turns electricity into usable torque. If your grinder is losing power, running hot, tripping, or showing signs of electrical failure (burning smell, inconsistent running, heavy sparking), the stator windings may be damaged. The Tork Craft TCAG0115-SK10 Stator With Stopper Set Service Kit replaces the components referenced as parts 33 to 36, helping restore stable motor operation and dependable performance on your TCAG0115.

Motor heart repair: renew the stator assembly for reliable running

Designed for the Tork Craft TCAG0115 platform, this kit is ideal for workshop repairs where the motor field coils and related mounting/stopper components need replacement. Fitment accuracy matters with motor parts — install cleanly, route wiring correctly, and test safely before returning to work.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
Recommended: Inspect the armature, carbon brushes, switch and power cord during a stator replacement — electrical faults often travel in packs.
Installation note: Ensure wiring is routed correctly and secured away from rotating parts and sharp edges.

Pro Tip

After fitting a new stator, do a short no-load run-in and listen for smooth, even sound. If brushes are worn or the commutator is rough, replace brushes and clean the commutator area — it helps the motor bed in properly and run cooler.

Features

Motor field-coil replacement: Replaces the stator assembly used in the TCAG0115 motor.
Includes stopper set: Supplied as a stator with stopper components for correct seating and stability.
Parts reference match: Covers parts 33–36 as per the service diagram references.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0115 angle grinder.

Benefits

Restore consistent power: Helps bring back smooth, stable motor performance after stator failure.
Reduce overheating and harsh running: Correct motor operation lowers stress on brushes, armature and bearings.
Extend tool life: A proper motor repair can keep a good grinder working longer without full replacement.

Safety

Wear eye protection and a dust mask when working with carbon dust and internal debris.
Disconnect power before opening the tool or fitting any electrical spare parts.
Motor repairs should be done by a competent technician — incorrect wiring can cause electric shock or motor failure.
Confirm all wires are secured, insulation is intact, and the spindle rotates freely before powering on.
After repair, perform a no-load test run in a safe area and stop immediately if you smell burning, hear rubbing, or see excessive sparking.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK10
Product Type	Spare Part Service Kit
Component Group	Stator With Stopper Set
Parts Reference	33–36
Compatible Tool Model	TCAG0115
Motor Component	Stator (Field Coil)