Spindle Lock Pin & Spring (19/20) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: TCAG0115-SK05
Weight: 0.01kg
Dim: 60.00mm x 55.00mm x 15.00mm
UPC: 6009515877385

Price:

R 14.49

Ex VAT: R 12.60

Available Options

Stockist

Tork Craft Spindle Lock Pin & Spring (19/20) Service Kit (TCAG0115-SK05)

At a Glance: Spindle lock pin and spring replacement kit (parts 19 & 20) for the Tork Craft TCAG0115 angle grinder

The spindle lock is the small but mighty helper that makes disc and accessory changes quick and controlled. If your lock button feels weak, doesn’t “bite”, or slips when you try to loosen a flange nut, chances are the lock pin and/or spring has worn or been damaged. The Tork Craft TCAG0115-SK05 Spindle Lock Pin & Spring Service Kit replaces the components referenced as parts 19 and 20, restoring a firm, positive lock so you can change discs with less frustration and more confidence.

Small parts, big difference: restore crisp spindle-lock action

Designed for the Tork Craft TCAG0115 platform, this service kit is ideal after heavy use, accidental engagement while spinning, or any time the lock mechanism no longer holds reliably. Fit the correct pin and spring, and your grinder’s disc changes feel “right” again.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
If the spindle lock still slips after replacement, inspect the mating lock point on the gear/spindle area for wear or damage.
Only use the spindle lock when the grinder is fully stopped—engaging it while spinning can damage the mechanism.

Pro Tip

When refitting the spindle lock, add a tiny dab of suitable light grease to the pin contact area (not excessive). It helps the pin move smoothly and reduces wear—then always wait for a complete stop before pressing the lock during disc changes.

Features

Targeted spindle-lock repair: Replaces the lock pin and spring components for the TCAG0115.
Parts reference match: Covers parts 19 and 20 as per the service diagram references.
Restores positive engagement: Helps the spindle lock hold securely during disc and flange nut changes.
Model-specific fit: Intended for compatibility with the Tork Craft TCAG0115 angle grinder.

Benefits

Easier disc changes: A firm spindle lock makes loosening/tightening smoother and more controlled.
Improved safety and confidence: Reduced chance of slipping during accessory changes when the lock engages properly.
Extends tool usability: Refreshes a commonly worn mechanism without replacing the entire grinder.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before fitting any spare parts or attempting disc changes.
Never press the spindle lock while the grinder is spinning or coasting to a stop.
Confirm the guard is correctly fitted and the spindle rotates freely before use.
After any repair, do a no-load test run in a safe area to check for normal operation.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK05
Product Type	Spare Part Service Kit
Component Group	Spindle Lock Pin & Spring
Parts Reference	19 & 20
Compatible Tool Model	TCAG0115