Annular Hole Cutter Tct 102 X 55mm Weld Shank 31.75mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: TCAC102-4
Weight: 1.20kg
Dim: 125.00mm x 115.00mm x 140.00mm
UPC: 6009515895358

Price:

R 6,929.33

Ex VAT: R 6,025.50

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 102 × 55 mm, 31.75 mm (1¼″) Weldon

Size: 102 mm x 55 mm [1¼″ Weldon Shank]

This 102 mm diameter TCT annular cutter from Tork Craft is built to make large clearance holes quickly. With a shallow 55 mm cutting depth and a robust 31.75 mm (1¼″) Weldon shank, it delivers fast, clean holes with minimal burrs and reduced feed pressure — ideal for flange, pipe or structural plate applications where size matters more than depth.

Extra Information

Use with a magnetic-base drill (or compatible drill press) fitted with a 31.75 mm (1¼″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection — ensure correct size for your arbor and slug path.
When drilling stainless steel or harder grades, apply suitable cutting fluid and maintain steady feed to protect the cutter life and ensure efficient chip clearance.

Pro Tip

Ensure the magnet base sits clean and flat on the workpiece. Begin at low RPM until the cutter begins to bite, then increase feed when consistent curled chips form. For large-diameter shallow cuts, clearing chips and re-lubricating between holes will help maintain finish and extend cutter life.

Features

102 mm diameter — for very large bolt holes, pipe penetrations or structural clearances.
55 mm cutting depth — shallow profile suited for plate work or clearance where depth is limited.
31.75 mm (1¼″) Weldon shank — two-flat drive ensures secure clamp in magnetic-base drills and compatible arbors.
TCT (tungsten-carbide-tipped) teeth — for long life and efficient cutting in steel and cast-iron environments.
Thin-wall, multi-flute body — accelerates penetration and supports efficient chip evacuation even at large sizes.

Benefits

Large-diameter productivity: By removing only the peripheral ring rather than the full core, the cutter achieves big holes faster than conventional drilling.
Cleaner finish: Reduced burrs and smoother edges cut down on post-drill cleanup and yield better fit-ups.
Lower operator effort: Despite the large size, the shallow depth helps manage feed pressure, making it more manageable especially on vertical or overhead work.
Industrial durability: TCT tips and heavy-duty Weldon shank provide reliable performance for demanding structural applications.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to manage heat and chip flow.
Ensure magnet or clamping base is firmly secured and the workpiece is stable before drilling; for overhead or angled work, use a tether.
Do not use hammer or impact drive; keep a steady feed and allow slug to eject naturally — stop immediately if feed slows or chatter begins.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	142(L)mm x Ø128mm
Package Weight	1.199kg
Product Dimensions	103(L)mm x Ø102mm
Product Weight	1.102kg
Material	TCT
Finish	Polished
Size	Ø102mm
Cutting Depth	55mm
Shank	1 - 1/4" (31.75mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT