Annular Hole Cutter Hss 65 X 30mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: TCAC065-1
Weight: 0.37kg
Dim: 80.00mm x 72.00mm x 115.00mm
UPC: 6009515894986

Price:

R 2,984.25

Ex VAT: R 2,595.00

Available Options

Stockist

Tork Craft Annular Hole Cutter — HSS 65 × 30 mm, 19.05 mm (3/4") Weldon

Size: 65 mm x 30 mm [3/4" Weldon Shank]

The 65 mm diameter HSS annular cutter from Tork Craft is tailored for large-clearance holes in steel, cast-iron and structural plate when depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers fast, clean broaches with minimal burrs and feed effort — perfect for flange penetrations, pipe clearances or heavy-duty structure work.

Extra Information

Designed for use in magnetic-base drills or drill presses equipped with a 19.05 mm (3/4″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring the cutter and ejecting the slug — ensure compatibility with your arbor.
On stainless steel or harder materials, use suitable cutting fluid and maintain steady feed to protect cutter life and ensure efficient chip removal.

Pro Tip

Make sure the magnet base is clean and flat before clamping. Begin at low speed until the cutter begins to bite, then increase feed once consistent curled chips appear. For large-diameter shallow holes, often clearing chips and re-lubricating after each hole improves finish and extends cutter life.

Features

65 mm diameter — large-clearance holes for bolts, bushings, pipe penetrations.
30 mm cutting depth — shallow but large diameter, matches plate or structural section conditions.
19.05 mm (3/4") Weldon shank — secure two-flat drive for magnetic drills.
HSS body — high-speed steel construction suitable for steel and cast-iron penetration.
Thin-wall, multi-flute design — enables faster penetration and efficient chip ejection even in large size cutters.

Benefits

Large-hole speed: removes only the material ring, making large holes quicker than conventional twist drilling.
Cleaner finish: fewer burrs and better fit reduce post-drill work.
Lower feed effort: even large diameter but shallow depth keeps feed manageable for vertical or overhead work.
Industrial reliability: HSS body and Weldon shank deliver consistent performance in demanding environments.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to aid heat control and chip removal.
Ensure the magnet or base clamp is securely fixed and the workpiece stable; use a tether when drilling overhead or on inclined surfaces.
Do not use hammer or impact drive; maintain smooth feed and allow the slug to eject cleanly — stop immediately if feed lags or chatter begins.
Disconnect power or disable magnet before changing cutters, pilot pins or shanks.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	111(L)mm x Ø72mm
Package Weight	375g
Product Dimensions	62(L)mm x Ø54mm
Product Weight	332g
Material	HSS
Finish	Polished
Size	Ø65mm
Cutting Depth	30mm
Shank	3/4" (19.05mm) Weldon shank compatible with most magnetic base drills.
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0004 for 30mm long cutters
	TCAC0005 for 55mm long cutters
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter HSS