Annular Hole Cutter Tct 32 X 35mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: TCAC032-3
Weight: 0.16kg
Dim: 125.00mm x 50.00mm x 45.00mm
UPC: 6009515895204

Price:

R 1,146.55

Ex VAT: R 997.00

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 32 × 35 mm, 19.05 mm (3/4") Weldon

Size: 32 mm x 35 mm [3/4" Weldon Shank]

The 32 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.

Extra Information

Use in a magnetic-base drill or drill press with a suitable Weldon-shank arbor.
A pilot pin is required for centring and slug ejection (sold separately).
Apply cutting fluid and steady feed, especially on stainless or harder grades.

Pro Tip

Seat the magnet on a clean, flat area. Start at low RPM, then increase feed until continuous chips form. On deeper cuts, pause to clear chips and re-lubricate to keep the cutter cool and the finish crisp.

Features

32 mm diameter — ideal for larger bolt clearances, bushings and conduit penetrations.
35 mm cutting depth — covers common plate thicknesses and stacked material.
19.05 mm (3/4") Weldon shank — reliable two-flat drive for mag drills.
TCT teeth — wear-resistant carbide tips for long life in steel and cast iron.
Thin-wall, multi-flute body — rapid penetration and efficient chip evacuation.

Benefits

High productivity — faster than twist drilling as only the periphery is cut.
Cleaner holes — reduced burrs minimize post-processing.
Lower effort — reduced feed pressure, helpful on vertical and overhead work.
Consistent accuracy — pilot-pin guided centring and controlled slug ejection.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
Ensure magnet adhesion and workpiece stability before drilling; tether the drill when working at height.
Do not use hammer action; keep a steady feed and allow the slug to eject.
Disconnect power before changing cutters or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	119(L)mm x Ø49mm
Package Weight	157g
Product Dimensions	75(L)mm x Ø32mm
Product Weight	136g
Material	TCT
Finish	Polished
Size	Ø32mm
Cutting Depth	35mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT