Polisher Service Kit Armature (26) For My3025-1

PACK SIZE

The price shown is per unit. Pack Size indicates the recommended order quantity and the number of units supplied per box.

Brand: TORK CRAFT
Model: MY3025-1-SK06
Weight: 0.44kg
Dim: 182.00mm x 130.00mm x 130.00mm
UPC: 6009515852306

Price:

R 675.05

Ex VAT: R 587.00

Available Options

Stockist

Tork Craft Polisher Service Kit Armature (26) For MY3025-1

At a Glance; Genuine replacement armature for MY3025-1 tube belt sander/polisher

The Tork Craft Polisher Service Kit Armature (26) For MY3025-1 is the genuine replacement motor armature for your MY3025-1 tube belt sander/polisher. Heavy stainless fabrication, continuous belt work and fine metal dust all put the motor under pressure. Over time the original armature can become burnt, noisy or lose torque, leaving the machine weak or refusing to start. Swapping in the correct MY3025-1-SK06 armature brings the heart of the motor back to factory condition so your Tork Craft tube belt sander/polisher can pull strongly again along tube, railings and sections.

Standout feature – factory-balanced armature matched to the MY3025-1 drive system

Because this armature is designed specifically for the MY3025-1 and identified as item 26 on the parts diagram, the shaft dimensions, winding specification and balance all match the original design. It sits correctly in the existing bearings and housings, meshes properly with the gears and helps the machine run smoothly at its rated speed range, instead of vibrating or hunting under load.

Extra Information

Only suitable for the Tork Craft MY3025-1 tube belt sander/polisher – always confirm the model number on the rating plate.
Best fitted as part of a full motor service together with an inspection of bearings, brushes and the gear box.
Use the exploded parts diagram to identify the existing armature as component 26 before starting disassembly.
Pack information: Model MY3025-1-SK06, approximate pack weight 0.44 kg, UPC 6009515852306.

Pro Tip

When fitting a new armature, always install new carbon brushes and check the bearings at the same time. Bedding fresh brushes onto a clean commutator, supported by good bearings, helps the repaired motor run cooler and greatly improves the lifespan of your MY3025-1-SK06 service kit.

Features

Genuine Tork Craft armature built for the MY3025-1 tube belt sander/polisher.
Correct shaft and bearing seats to suit the original bearings, housings and gear layout.
Factory-balanced rotor to minimise vibration and improve smooth running at polishing speeds.
Quality copper windings and commutator for reliable electrical performance when installed correctly.

Benefits

Restore lost power: a fresh armature can bring a weak, noisy or non-starting MY3025-1 back to life.
Smoother operation: correct fit and balance help reduce noise, vibration and heat during use.
Extend tool life: replacing a failed armature is usually far more economical than buying a new tube belt sander/polisher.

Safety

Always disconnect the MY3025-1 from the mains and allow it to cool before opening the motor housing.
Take care with internal wiring and insulation – route cables as originally fitted and avoid pinching them on reassembly.
Ensure all covers, screws and safety components are correctly refitted before testing the repaired tool.
If you are not confident working on electric tools, have the MY3025-1-SK06 armature fitted by a qualified technician.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	MY3025-1-SK06
Product Type	Polisher Service Kit – Armature
Compatible Tool	Tork Craft MY3025-1 Tube Belt Sander/Polisher
Component Function	Motor Armature (Item 26)
Application	Restoring Motor Power And Smooth Running
Spare Category	Tube Belt Sander/Polisher Spares
UPC	6009515852306