Festool ES-ETS 125 REQ-Plus Edge Sander

Name: Festool ES-ETS 125 REQ-Plus Edge Sander
Brand: FESTOOL
SKU: FES576678
Price: 14553.83 ZAR
Availability: OutOfStock

Festool ES-ETS 125 REQ-Plus Edge Sander

PACK SIZE

The price shown is per unit. Pack Size indicates the recommended order quantity and the number of units supplied per box.

Brand: FESTOOL
Model: FES576678
Weight: 5.53kg
Dim: 395.00mm x 295.00mm x 340.00mm
UPC: 4014549371978

Price:

R 14,553.83

Ex VAT: R 12,655.50

Available Options

Stockist

Festool ES-ETS 125 REQ-Plus Edge Sander

At a Glance: 250 W edge sander with 125 mm sanding pad, 2 mm sanding stroke, 43 - 92° angle adjustment and controlled full-surface edge support.

The Festool ES-ETS 125 REQ-Plus is a clever edge sander designed to take the frustration out of sanding edges by hand. It helps produce clean, consistent and repeatable sanding results on sawn, routed, painted, filled and solid wood edges. With full-surface support, adjustable angle control and two sanding modes, this machine helps reduce tipping, sanding-through and uneven edge finishing. It is a time-saving solution for furniture makers, joiners, installers and finishing professionals who need accurate edge sanding with less effort and better control.

Machine sanding for perfect edges without the hand-sanding struggle

The ES-ETS 125 REQ-Plus is built to keep the sanding pad properly supported on the edge. This helps prevent the common problem of rounding over, tipping or sanding through delicate painted and filled surfaces. It is ideal for repeatable edge finishing where neat, consistent results matter.

Product highlights

Designed for every edge: Suitable for sawn, routed, coarse, painted, filled and solid wood edges.
Full-surface support: Helps prevent tipping and sanding through during edge sanding.
Adjustable angle range: Tool-free angle adjustment from 43 - 92° for straight, sloped and angled edges.
Hard and Soft sanding modes: Hard mode is ideal for pre-sanding, while Soft mode adapts to delicate surfaces for intermediate sanding.
Time-saving sanding: Replaces manual sanding and can save valuable time on repeated edge-finishing work.
Dust extraction ready: Can be used with the integral dust bag or connected to a suitable dust extractor.
StickFix abrasive system: Allows quick and easy abrasive changes without clamps or adhesives.
Plug-it cable system: Removable cable makes setup, storage and tool changeovers easier.

Extra Information

The machine is designed to sit fully on the edge surface, helping prevent tipping and uneven sanding.
Hard mode is useful for pre-sanding where a fixed angle must be maintained.
Soft mode allows the sander to adapt more closely to the surface, which is useful when sanding painted or filled edges.
The edge sander can work with the included chip collection bag or with a suitable Festool dust extractor.
The edge sander system can also be mounted on compatible ETS 125 and ETSC 125 sanders as an accessory setup.

Pro Tips

Use Hard mode for pre-sanding and keeping the edge fixed to the set angle.
Use Soft mode for intermediate sanding on painted or filled edges where you want to avoid sanding through the finish.
Set the angle carefully before sanding a batch of parts to keep all edges consistent.
Use dust extraction when sanding painted, filled or coated materials to keep the edge surface cleaner.
Do not press too hard; let the sanding pad and guide system do the work for a cleaner finish.

How to Use

Fit the correct 125 mm StickFix abrasive for the material and sanding stage.
Attach the chip collection bag or connect a suitable dust extractor to the 27 mm extraction connection.
Set the required sanding angle between 43 - 92°.
Select Hard mode for pre-sanding or Soft mode for more sensitive intermediate sanding.
Place the sander fully onto the edge so the guide surface is stable before switching on.
Start the machine and allow it to reach the selected speed.
Move the sander steadily along the edge without forcing it.
Keep the guide surface properly supported to prevent tipping or uneven sanding.
Switch off the machine and allow the pad to stop before lifting it away from the workpiece.
Clean the sanding pad, dust ports and guide surfaces after use.

Features

250 W motor: Provides efficient sanding performance for edge finishing applications.
125 mm sanding pad: Suitable for controlled sanding over narrow and wider edges.
2 mm sanding stroke: Designed for clean finishing with controlled material removal.
Variable speed electronics: Speed control allows adjustment for different materials and surface finishes.
43 - 92° angle adjustment: Supports sanding of perpendicular, angled and sloped edges.
5 - 60 mm edge height range: Useful for a wide variety of furniture, board and joinery edge applications.
Jetstream principle: Helps reduce dust accumulation, heat build-up and abrasive clogging.
Protector system: Helps protect the sanding pad and workpiece when sanding close to edges.
Vibration protection: Smooth running helps improve comfort during sanding work.

Benefits

More consistent edge quality: The guide and full-surface support help create repeatable sanding results.
Less sanding-through: Soft mode helps protect painted, filled and delicate surfaces during intermediate sanding.
Faster than hand sanding: Machine sanding saves time on repetitive edge-finishing tasks.
Cleaner working: Dust extraction compatibility helps keep the work area and edge surface cleaner.
Better control: Several grip positions and guided support make the machine easier to control on different workpieces.

Application

Furniture manufacture
Edge finishing work
Sanding sawn wood edges
Sanding planed wood edges
Sanding painted edges without tipping
Sanding filled edges without sanding through
Sanding solid wood edges in fixed angular positions
Finishing straight, sloped and external curved edges

Safety

Wear eye, ear and dust protection when sanding wood, paint, filler or coated materials.
Always read and follow the manufacturer’s operating and safety instructions before use.
Check that the sanding pad, abrasive and guide surfaces are correctly fitted before switching on the machine.
Do not use torn, damaged or incorrectly fitted abrasives.
Keep hands clear of the sanding pad during operation.
Ensure the workpiece is stable and properly supported before sanding.
Use dust extraction where possible, especially when sanding painted or filled surfaces.
Allow the sanding pad to stop completely before putting the machine down.
Disconnect the machine from the power supply before changing abrasives, adjusting accessories, cleaning or carrying out maintenance.

Specifications

Description	Spec
Brand	Festool
Cat No.	FES576678
Festool Product No.	576678
Product Type	Edge Sander
Model	ES-ETS 125 REQ-Plus
Power Consumption	250 W
Eccentric Motion Speed	6 000 - 12 000 min⁻¹
Sanding Stroke	2.00 mm
Angle Adjustment	43 - 92°
Edge Height	5 - 60 mm
Replaceable Sanding Disc Diameter	125.00 mm
Dust Extraction Connection Diameter	27 mm
Cable Length	4.00 m
Product Weight Without Accessories	1.90 kg
Drive Type	Mains
Sanding Total Vibration Average Ah	3.50 m/s²
Sanding Sound Pressure Level LpA	73.00 dB(A)
Sanding Sound Power Level LWA	84.00 dB(A)
Sanding Vibration Uncertainty K	1.50 m/s²
Sanding Noise Uncertainty K	3.00 dB
Standards Series EN	62841-2-4