Allen Key For Ac26 Screw Pilot

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TZ AC26-02
Weight: 0.01kg
Pack Dim: 7.00mm x 2.00mm x 1.00mm
UPC: 6009515907938

Price:

R 5.81

Ex VAT: R 5.05

Available Options

Stockist

Tork Craft Allen Key For AC26 Screw Pilot

At a Glance; Replacement hex key for TZ-AC26 screw pilot/countersink set

The Tork Craft Allen Key For AC26 Screw Pilot is the small but essential accessory that keeps your TZ-AC26 screw pilot/countersink set working properly. This hex key is used to loosen and tighten the grub screws that hold the pilot drills and countersink bodies in place, allowing you to adjust drill length or replace worn bits quickly. Keep a spare in your toolbox so your pilot and countersink set is always ready for the next job.

Standout feature – dedicated Allen key for TZ-AC26 screw pilot/countersink set

Designed to suit the TZ-AC26 screw pilot set, this Allen key fits the grub screws correctly so you can make secure adjustments without damaging the screw heads. It is a simple, robust tool that helps extend the life of your screw pilot bits and keeps your countersinks performing at their best.

Extra Information

Specifically intended for use with the Tork Craft TZ-AC26 Screw Pilot/Countersink Set.
Store the Allen key in the same case or container as your screw pilot bits to avoid misplacing it.
Periodically check that the grub screws are snug to ensure the pilot drills do not slip under load.

Pro Tip

When setting the drill length on your screw pilot bits, lightly tighten the grub screw first, check the depth on a scrap piece of timber, then make fine adjustments and fully tighten with the Allen key. This gives you consistent screw depth and cleaner finishes across the whole job.

Features

Correct size for TZ-AC26 fits the grub screws used on the Tork Craft TZ-AC26 screw pilot/countersink set.
Durable steel construction offers good strength and wear resistance for repeated tightening and loosening.
L-shaped design provides a comfortable grip and leverage when adjusting or securing the pilot drills.
Compact accessory is easy to keep with your drill bits or in a small parts organiser.

Benefits

Keep your set in service: quickly adjust or replace pilot drills so the TZ-AC26 set stays productive.
Reduce damage to screws: using the correct size Allen key helps prevent stripping grub screw heads.
Convenient spare: ideal as a replacement if the original key is lost or worn, saving you from downtime.

Safety

Always disconnect the drill or remove the battery before adjusting screw pilot bits with the Allen key.
Ensure the Allen key is fully engaged in the grub screw before applying force to prevent slipping.
Do not use the key as a lever or pry bar – misuse can cause bending or breakage.
Keep small tools like this Allen key away from children when not in use.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TZ-AC26-02
Product Type	Allen Key
Compatible Set	TZ-AC26 Screw Pilot/Countersink Set
Tool Style	L-Shaped Hex Key
Material	Steel
Pack Quantity	1 Piece
Typical Use	Adjusting and securing pilot drills in screw pilot bits