Router Bit Straight 1/4" (6.35mm)

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: CKP201
Weight: 0.03kg
Dim: 138.00mm x 80.00mm x 35.00mm
UPC: 6009675085217

Price:

R 61.18

Ex VAT: R 53.20

Available Options

Stockist

Straight Router Bit Two Flute

Cutting Diameter: 1/4" (6.35mm)
Classification: Standard (Yellow)

The Two-Flute Straight Router Bit is a core staple for any woodworker who demands a fine finish on basic, square-sided cuts.

Engineered with two precision-ground carbide-tipped cutting edges, this bit provides superior balance and minimal vibration by allowing two cuts per revolution. This geometry results in an exceptionally smooth and clean surface ideal for applications where the final appearance is critical.

It is the perfect choice for routing precise grooves, dadoes, and rabbets in hardwood, softwood, plywood, and various composite materials.

While the two flutes offer a cleaner cut than single-flute alternatives, requiring a slightly slower feed rate for optimal chip clearance, the trade-off is a high-quality, professional finish, making it indispensable for joinery work, cabinet construction, and general-purpose edge-routing.

Application:

Router bits are for use with router machines only.
Be sure that at least 3/4 of the shaft length is inserted into the router collet.
Do not "bottom-out" the bit in the collet. The shank should be 1/8" from the bottom of the collet.
Route in two or more passes when large amounts of stock must be removed.
Carpenters
Craftsmen
Hobbyists
Woodworking
DIY

Extra Information

Make multiple, shallow passes rather than removing too much in one go.
Maintain a steady feed speed and rpm to avoid burning or chatter.
Ensure the bit is securely clamped in the collet before use.
Clear chips regularly, especially in deeper cuts.

Pro Tip

For hinge or hardware routing, score the boundary first with a knife, then remove waste in steps to preserve sharpness and prevent tear-out.
When crossing end-grain, consider a light climb-cut for a clean finish, then complete the pass standard-cut.

Features

Straight edge bit — ideal for trimming, grooves and cleaning slots.
6.35 mm (¼″) cutting diameter.
Precision-ground cutting edges for smooth, clean cuts.
Rigid construction to reduce vibration and chatter.
Compatible with standard router collets of corresponding shank size.

Benefits

Crisp finish: produces clean grooves with minimal sanding.
Accurate tracking: usable in jigs, fences, and straight guides.
Versatile: works for joinery, hardware clearance, template routing, etc.

Safety

Always wear eye and hearing protection when routing.
Secure your workpiece and guide/template firmly.
Feed direction should be against the rotation of the bit to avoid grabbing.
Allow the router to reach full speed before entering the cut; stop fully before removing the bit.
Inspect the bit before each use and replace it when dull or damaged.

Description	Specification
Packaging Type	Hanging card / Blister
Material	Cutting Edge: Tungsten Carbide Body & Shank: HSS (High Speed Steel)
Package Dimensions	138(L) x 78(W) x 46(H)mm
Package Weight	29.32g
Tool Dimensions	50.16(L) x Ø6.35mm
Tool Weight	10.56g
Cutting Diameter	1/4"
Cutting Depth	3/4"
Shank Diameter	1/4"
Shank Length	27mm
Country of Origin	Republic of China (PRC)
Warranty	6 Months
Content	1x Straight Router Bit

Bulk

Inner Box
Dimensions (box/pack)	385(L) x 175(W) x 57(H)mm
Weight (box/pack)	425g
Qty (box/pack)	10
Outer Box
Dimensions (box/pack)	405(L) x 370(W) x 310(H)mm
Weight (box/pack)	4.96kg
Qty (box/pack)	100