Cutting Disc Steel 180 X 2.5 X 22.22

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Brand: TORK CRAFT
Model: ABR180S
Weight: 0.15kg
Dim: 180.00mm x 180.00mm x 2.00mm
UPC: 6009515860486

Price:

R 39.33

Ex VAT: R 34.20

Available Options

Stockist

Tork Craft Cutting Disc — Steel, 180 × 2.5 × 22.23 mm

Slice through steel with confidence. The Tork Craft ABR180S is a high-performance 180 mm cutting disc designed for clean, fast cuts in mild and structural steel, tubing, angle iron, flat bar and sheet. With a 2.5 mm kerf for balanced speed and life, and a standard 22.23 mm bore to fit popular 180 mm angle grinders, it’s a workshop and site workhorse you can trust.

Optimised bond and reinforced construction keep cuts straight and vibration low, helping you finish more pieces per disc with less rework.

Extra Information

Best for mild steel, angle, tube, channel and plate; not intended for stainless (use INOX-rated discs) or non-ferrous metals.
For fastest results, let the wheel cut—avoid excessive side pressure and keep the tool at a shallow approach angle.
Use a guarded grinder and match the disc diameter to the machine’s rated size.

Features

180 mm diameter for deeper cuts and efficient lineal speed.
2.5 mm thickness—great balance of cutting speed, edge stability and disc life.
22.23 mm arbor—fits standard 180 mm angle grinders.
Reinforced bonded abrasive for strength and straight tracking.
Steel-focused blend for ferrous metals and general fabrication.

Benefits

Fast, clean cuts reduce burr and post-cut finishing.
Longer service life helps lower cost per cut.
Stable feel in the cut improves accuracy and user control.
Wide compatibility with common 180 mm grinders on site and in the shop.

Safety

Always use the grinder’s guard and wear eye, face, hearing and hand protection.
Confirm the grinder’s no-load RPM does not exceed the disc’s rated RPM.
Mount firmly; perform a brief no-load spin-up in a safe direction before cutting.
Use for straight cutting only; do not side-grind with cut-off wheels.
Discard damaged, dropped or expired discs immediately.

Specifications

Description	Spec
Brand	Tork Craft
Model / Cat No.	ABR180S
Disc Type	Cut-off wheel (Type 41, flat)
Diameter	180 mm
Thickness (Kerf)	2.5 mm
Bore / Arbor	22.23 mm
Material Suitability	Steel / ferrous metals (general fabrication)
Max Peripheral Speed	80 m/s (typical)
Max RPM (Ø180)	≈ 8 500 rpm (typical @ 80 m/s)
Standards	EN 12413 (bonded abrasives)
Pack Qty	Sold individually (check listing for multi-pack options)
Tool Compatibility	180 mm angle grinders with guard