Reciprocating Shaft Kit (34-36/38)

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TC20180-SK08
Weight: 0.25kg
Pack Dim: 170.00mm x 160.00mm x 35.00mm
UPC: 6009515899554

Price:

R 906.78

Ex VAT: R 788.50

Available Options

Stockist

Tork Craft Reciprocating Shaft Kit (34-36/38) For TC20180 RS25 20V Reciprocating Saw

At a Glance: Genuine reciprocating shaft service kit for the TC20180 RS25 20V reciprocating saw

The reciprocating shaft is the workhorse that turns motor rotation into the aggressive back-and-forth blade stroke that does the cutting. When this shaft wears, bends or its guides become sloppy, you feel it immediately as extra vibration, noise and rough cutting. The Tork Craft TC20180-SK08 Reciprocating Shaft Kit brings together the key shaft components (items 34–36 and 38) for the RS25 20V brushless reciprocating saw so you can restore a smooth, controlled stroke and keep the saw earning its keep on site or in the workshop.

Reciprocating shaft drive kit – parts 34–36 and 38 for the TC20180 RS25 saw

This genuine Tork Craft spare kit typically includes the reciprocating shaft and associated parts shown as items 34, 35, 36 and 38 on the TC20180 exploded diagram. Together they form the core of the reciprocating motion system that drives the blade. Renewing these components is a smart way to address excessive play, uneven stroke or noticeable wear in the front drive train of your RS25 20V brushless reciprocating saw.

Extra Information

Purpose-made for the Tork Craft TC20180 RS25 20V brushless reciprocating saw – confirm the model number on your tool before ordering.
Use the official TC20180 exploded diagram to see how items 34–36 and 38 relate to the rest of the drive train and front support.
Recommended when you notice excessive play at the blade end, uneven stroke, or abnormal noise from the drive area.
Best installed as part of a broader service that includes checking gears, bearings, gaskets and lubrication in the drive housing.
Pack dimensions and weight should be recorded separately in your admin console for shipping and logistics and are not shown in the specifications table.

Pro Tip

When removing the old reciprocating shaft, mark its orientation and take step-by-step photos of spacers, circlips and guides. This visual record makes it much easier to install the new shaft kit in the correct order and avoid missing small but important parts.

Features

Genuine Tork Craft spare kit – Original reciprocating shaft components for the TC20180 RS25 20V reciprocating saw.
Covers key reciprocating parts – Includes selected items 34–36 and 38 from the official parts list.
Designed for 20V brushless RS25 – Correct geometry and interfaces to match the factory drive system.
Smooth guided stroke – Fresh shaft components help maintain a consistent 25.4 mm stroke at up to 2 800 strokes per minute.
Service-ready assembly kit – Supplied as a group of related parts, ideal for a planned drive train overhaul.

Benefits

Reduce vibration and harshness: New shaft components help the saw run tighter and more comfortably in the hand.
Improve cutting accuracy: A stable, well-supported reciprocating shaft helps keep blades tracking straighter in the cut.
Restore original performance: Bring an older RS25 back to the smooth feel and control it had when new.
Protect related parts: Correctly supported motion reduces stress on gears, bearings and the blade clamp.
Extend tool lifespan: Renew the high-wear drive components instead of replacing the complete saw.

Safety

Remove the 20V battery pack from the saw before opening the housing or working on the reciprocating shaft assembly.
Work on a clean, stable surface and keep small circlips, pins and spacers organised so they do not get lost.
After fitting the new shaft kit, turn the mechanism by hand to check for smooth travel throughout the stroke before refitting covers.
Run the saw briefly at no-load to confirm there is no unusual vibration or noise before returning it to full service.
If you are unsure of any step in the repair, consult an authorised Tork Craft service centre or a qualified technician.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TC20180-SK08
Product Type	Reciprocating Shaft Service Kit
Compatible Tool Model	TC20180 RS25 20V Brushless Reciprocating Saw
Key Components	Reciprocating shaft and associated parts (items 34–36, 38)
Stroke Length (Tool)	25.4 mm stroke when fitted to RS25 saw
Motor Type (Tool)	Brushless 20V DC drive system
Typical Application	Replacement of worn or damaged reciprocating shaft components
Pack Size	1 × reciprocating shaft kit