Polisher Bearing 6000 For Pol04

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: POL04-29
Weight: 0.02kg
Pack Dim: 27.00mm x 27.00mm x 8.00mm
UPC: 6009515862152

Price:

R 35.88

Ex VAT: R 31.20

Available Options

Stockist

Tork Craft Polisher Bearing 6000 For POL04

At a Glance; Genuine 6000 series bearing for the Tork Craft POL04 polisher motor and drive assembly.

Keep your Tork Craft POL04 polisher feeling tight, smooth and professional with this dedicated POL04-29 6000 bearing spare. Motor and drive bearings carry the rotating armature or spindle, helping the machine spin freely with minimal friction and vibration. Once a bearing starts to wear, the polisher can quickly become noisy, harsh and less accurate on the work surface.

This genuine Tork Craft 6000 bearing is matched to the original POL04 specification for size, fit and load rating. When fitted correctly by a competent technician, it restores smooth rotation where specified in the motor or drive system, helping your POL04 run quietly and confidently on automotive paintwork, metal and other surfaces.

Extra Information

Typical signs that a 6000 bearing needs replacement include unusual noises from the front or rear of the polisher, a rough or “notchy” feel when the spindle is turned by hand, noticeable play on the shaft or increased heat around the bearing area during use. Replacing a failing bearing with the POL04-29 spare restores proper support and helps prevent damage to the motor and gear components.

When you replace a bearing on the POL04, it is a good opportunity to inspect related parts such as gears, other bearings, seals, grease and brushes at the same time. Carrying out a more complete service with genuine Tork Craft spares keeps the polisher dependable for professional and serious home workshop users.

Pro Tip

Pro Tip: Use the correct pullers and press tools when removing and installing 6000 bearings – do not hammer directly on the inner or outer race. After fitting the new POL04-29 bearing and reassembling the tool, spin the spindle by hand with the machine unplugged to check for smooth, free movement before running the polisher at low speed with no load as a final check.

Features

Genuine Tork Craft 6000 bearing for the POL04 rotary polisher.
Matched to the original POL04 motor and drive design.
Precision deep-groove ball bearing for low-friction rotation.
Supports rotating components under polishing and compounding loads.
Suitable for continuous use in workshops, panel shops and detailing bays.
Direct replacement spare referenced as POL04-29.

Benefits

Reduces rumbling, grinding and vibration from worn bearings.
Helps the backing pad run true for a smoother, more even finish.
Protects gears, shafts and housings from misalignment and extra stress.
Extends the service life of the POL04 instead of replacing the whole tool.
Using a correct OEM 6000 bearing simplifies future servicing and diagnostics.

Safety

Always unplug the polisher from the mains before opening the housing or working on internal parts.
Allow the tool to cool down fully before handling bearings and related components.
Ensure bearings are pressed on and seated correctly to avoid damaging the shaft or housing.
Refit all covers, guards and screws securely and test the polisher under no load before normal use.
If you are unsure about bearing replacement, have the repair carried out by a qualified technician or an approved service centre.

Specifications

Technical
Brand	Tork Craft
Model No.	POL04-29
Product Type	Polisher Bearing 6000
Compatible Tool	POL04 Rotary Polisher
Bearing Type	6000 Series Deep-Groove Ball Bearing
Function	Supports rotating motor or drive components for smooth operation
Application	Replacement of worn or damaged 6000 bearing in POL04 motor / drive assembly
Category	Spare Part