Annular Hole Cutter Tct 70 X 35mm Weld Shank 31.75mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC070-3
Weight: 0.64kg
Pack Dim: 105.00mm x 95.00mm x 120.00mm
UPC: 6009515895228

Price:

R 2,554.15

Ex VAT: R 2,221.00

Available Options

Stockist

Tork Craft Annular Hole Cutter TCT 70 x 30mm Weld Shank 31.75mm (TCAC070-3)

At a Glance: TCT annular cutter for 70mm holes with 30mm cutting depth and 31.75mm weld shank for magnetic base drills

When you need big, accurate holes in steel without turning the job into a slow-motion wrestling match, an annular cutter is the clever shortcut. The Tork Craft TCAC070-3 TCT Annular Hole Cutter is designed for magnetic base drills and cuts a 70mm diameter hole with a 30mm cutting depth, using a 31.75mm weld shank for a secure fit. Unlike a standard twist drill that turns the whole hole into chips, an annular cutter removes only the perimeter—so it typically cuts faster, with less power, less heat, and a cleaner finish. Perfect for fabrication shops, site work, maintenance crews, and anyone drilling structural steel on the regular.

TCT performance for fast, clean hole cutting in steel

The TCT (tungsten carbide tipped) cutting edges are built for demanding materials and consistent performance. Pair it with the right pilot pin and cutting fluid, and you’ll get smoother cutting, longer tool life, and more predictable results—especially on thicker steel sections and plate.

Extra Information

Use with a suitable magnetic base drill and ensure the magnet is fully engaged on clean, flat steel.
For best performance, use cutting fluid and maintain steady feed—too little feed can cause rubbing and heat.
Use the correct pilot pin for your setup (pilot pins help locate the cutter and eject the slug).
Remove burrs after drilling and deburr sharp edges for safer handling and better fitment.

Pro Tip

Let the cutter do the work: keep a steady, firm feed and use plenty of cutting fluid—most premature wear comes from overheating and “rubbing” instead of cutting.

Features

70mm Cutting Diameter Produces large, accurate holes for fabrication and installation work.
30mm Cutting Depth Suitable for common plate and structural steel thicknesses.
TCT Cutting Teeth Tungsten carbide tipped edges for durability and strong cutting performance.
31.75mm Weld Shank Secure shank style commonly used on magnetic base drills.
Annular Cutting Design Cuts only the perimeter, reducing heat build-up and power demand compared to twist drills.

Benefits

Faster Hole Cutting: Removes less material than a standard drill bit, typically speeding up the job.
Cleaner Results: Produces a neater hole with less burr and better finish quality.
Less Strain on the Drill: Lower cutting resistance can mean smoother operation and better control.
Longer Tool Life: TCT edges are designed to handle tough work when used with correct feed and lubrication.

Safety

Wear eye protection and hearing protection when drilling and cutting metal.
Secure the workpiece and ensure the magnetic drill base is firmly attached to a clean, flat surface.
Keep hands clear of rotating parts and never remove swarf with bare hands—use a brush or pliers.
Use cutting fluid and allow the tool to cool; cutters and swarf can be hot and sharp.
Disconnect power before changing cutters or making adjustments to the drill.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	123(L)mm x Ø105mm
Package Weight	645g
Product Dimensions	86(L)mm x Ø70mm
Product Weight	572g
Material	TCT
Finish	Polished
Size	Ø70mm
Cutting Depth	35mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT