Annular Hole Cutter Hss 65 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC065-2
Weight: 0.48kg
Pack Dim: 110.00mm x 80.00mm x 73.00mm
UPC: 6009515894993

Price:

R 3,592.03

Ex VAT: R 3,123.50

Available Options

Stockist

Tork Craft Annular Hole Cutter — HSS 65 × 55 mm, 19.05 mm (3/4") Weldon

Size: 65 mm x 55 mm [3/4" Weldon Shank]

The 65 mm diameter HSS annular cutter from Tork Craft is engineered for significant clearance holes in steel and cast-iron where both diameter and depth matter. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent industrial performance.

Extra Information

Suitable for use with a magnetic-base drill or compatible drill press arbor fitted to a 19.05 mm (3/4″) Weldon shank.
A pilot pin (sold separately) is required for centring the cutter and slug ejection — ensure correct size for your arbor and material thickness.
When cutting stainless steel or harder materials, apply suitable cutting fluid and maintain steady feed to protect cutter life and prevent chip clogging.

Pro Tip

Ensure the magnet base is clean and flat before clamping. Begin at low speed so the cutter locates accurately, then increase feed when consistent curled chips form. For deeper large-diameter cuts, pause periodically to clear chips and re-lubricate to maintain finish and prolong cutter life.

Features

65 mm diameter — built for large bolt holes, bushings or pipe passages.
55 mm cutting depth — handles deeper plate and stacked structural material.
19.05 mm (3/4") Weldon shank — two-flat drive ensures secure clamp in magnetic drills.
HSS (high-speed steel) body — durable for steel, cast-iron and heavy-duty use.
Thin-wall, multi-flute design — enhanced penetration, efficient chip evacuation and lower machine load.

Benefits

Large-hole speed: Cuts only a peripheral ring, allowing greater diameter with less material removal vs a twist drill.
Cleaner result: Reduced burrs, better bore finish and fewer rework steps.
Improved usability: Lower feed pressure even for large size means better operator comfort, especially in overhead or vertical drilling.
Robust construction: HSS body + Weldon interface deliver industrial-grade reliability and repeatability.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip removal.
Ensure the magnet base or clamping system is firmly secured and the workpiece stable before drilling; use a tether when working overhead or on angled surfaces.
Do not use hammer or impact mode; maintain steady feed and allow the slug to eject cleanly — if feed slows, stop and clear chips immediately.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	112(L)mm x Ø72mm
Package Weight	486g
Product Dimensions	87(L)mm x Ø54mm
Product Weight	444g
Material	HSS
Finish	Polished
Size	Ø65mm
Cutting Depth	55mm
Shank	3/4" (19.05mm) Weldon shank compatible with most magnetic base drills.
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0004 for 30mm long cutters
	TCAC0005 for 55mm long cutters
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter HSS