Annular Hole Cutter Tct 22 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC022-4
Weight: 0.11kg
Pack Dim: 120.00mm x 38.00mm x 35.00mm
UPC: 6009515895112

Price:

R 917.70

Ex VAT: R 798.00

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 22 × 55 mm, 19.05 mm (3/4") Weldon

Size: 22 mm x 55 mm [3/4" Weldon Shank]

The 22 mm TCT annular cutter removes only a thin ring of material for quicker holes, lower feed pressure and a cleaner finish. Carbide-tipped teeth stay sharp in demanding steels, while the robust 19.05 mm (3/4″) Weldon shank provides secure, slip-free drive in most magnetic-base drills and compatible arbors.

Extra Information

Use with magnetic-base drills or drill presses fitted with a Weldon-shank arbor.
A pilot pin is required for centering and slug ejection (sold separately).
Apply cutting fluid and steady feed, especially on stainless or harder grades.

Pro Tip

Ensure the magnet seats on a clean, flat surface. Start at low RPM, then increase feed until chips form in continuous curls. Pause to clear chips and re-lubricate on deep cuts for best finish and tool life.

Features

22 mm diameter — accurate sizing for anchors, bushings and clearance holes.
55 mm cutting depth — handles common plate thicknesses and stacked material.
19.05 mm (3/4") Weldon shank — two-flat drive for secure clamping.
TCT teeth — long life and sustained cutting speed in structural steel and cast iron.
Thin-wall, multi-flute geometry to speed penetration and evacuate chips efficiently.

Benefits

Faster holes than twist drilling by removing less material.
Smoother finish with reduced burrs and less cleanup.
Extended tool life from wear-resistant carbide tips.
Lower effort — reduced feed pressure on vertical and overhead jobs.

Safety

Wear eye, ear and gloves protection; use cutting fluid to manage heat and chip flow.
Verify magnet adhesion before drilling; tether the drill when working at height.
Do not use hammer action; maintain straight, steady feed and allow the slug to eject.
Disconnect power before changing cutters or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	118(L)mm x Ø38mm
Package Weight	111g
Product Dimensions	93(L)mm x Ø22mm
Product Weight	97g
Material	TCT
Finish	Polished
Size	Ø22mm
Cutting Depth	55mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT