Pilot Pin Tct Cutter 18mm - 102mm X 55mm 7.9 X 108mm Broach Cutte

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC0005-04
Weight: 0.02kg
Pack Dim: 40.00mm x 20.00mm x 20.00mm
UPC: 6009515897833

Price:

R 105.80

Ex VAT: R 92.00

Available Options

Stockist

Tork Craft Pilot Pin for TCT Cutters — 18-102 mm × 50 mm (Model TCAC0005-04)

The Tork Craft TCAC0005-04 pilot pin is designed for use with tungsten-carbide tipped (TCT) annular cutters sized from 18 mm up to 102 mm in diameter, supporting a 50 mm cutting depth. The robust 7.9 mm × 108 mm shank ensures secure engagement with standard drill systems, and the precision pilot drill center ensures accurate hole placement and reliable slug ejection for efficient drilling operations.

Extra Information

Best suited for TCT annular cutters requiring 50 mm cutting depth and 7.9 mm × 108 mm shank.
In metal fabrication, use cooling/lubrication to extend cutter and mandrel life.
Always ensure the pilot drill and shank are securely fixed before operation to prevent misalignment or damage.

Pro Tip

When using large diameter cutters (e.g., > 50 mm), begin at slower RPM and moderate feed rate to reduce heat and prolong tool life.
Inspect the pilot drill bit after each job — if worn, replace promptly to maintain accurate centering.

Features

Compatible with TCT annular cutters in the 18 mm – 102 mm diameter range.
Designed for cutters with a 50 mm cutting depth.
Shank size: 7.9 mm × 108 mm — fits standard drill chucks and arbors.
Precision pilot drill included for improved centering and cut accuracy.
High-strength steel construction for durability in demanding fabrication work.

Benefits

Wide compatibility: Supports a broad range of cutter sizes (18-102 mm) with one mandrel.
Precise holes: Pilot drill helps maintain true alignment and reduces wanders when initiating a cut.
Reliable slug ejection: Designed to work with TCT cutters to facilitate clean holes and fast removal of the central slug.
Longevity: High-quality materials maintain integrity and alignment through repeated use.

Safety

Disconnect power tool before fitting or removing the pilot pin and cutters.
Wear eye, ear and hand protection during drilling operations.
Ensure the mandrel and hole saw/cutter are securely tightened before use.
Do not exceed recommended RPM or feed pressure for the cutters in use.

Specifications

Description	Spec
Brand	Tork Craft
Model / SKU	TCAC0005-04
Product Type	Pilot Pin / Arbor for TCT Annular Cutters
Compatible Cutter Diameter	18-102 mm
Supported Cutting Depth	50 mm
Shank Size	7.9 mm × 108 mm
Material	Hardened Steel with Pilot Drill
Typical Use	Metal fabrication, broach drilling, TCT annular cutter setups