Drill Pop Riveter Spare Noze Pieces 6.0mm For Tcriv003

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 31
Model: TCRIV003-05
Weight: 0.01kg
Pack Dim: 13.00mm x 100.00mm x 155.00mm
UPC: 6009515898366

Price:

R 124.89

Ex VAT: R 108.60

Available Options

Stockist

Tork Craft Drill Pop Riveter Spare Noze Pieces 6.0mm For TCRIV003 (TCRIV003-05)

At a Glance: Replacement 6.0mm nose piece for the Tork Craft TCRIV003 pop riveter.

6.0mm rivets are for jobs that want real holding power—thicker materials, higher loads, and less tolerance for sloppy alignment. That’s where the correct nose piece matters: it guides the rivet, supports a straight pull, and helps the jaws grip the mandrel properly until the snap. The Tork Craft TCRIV003-05 Drill Pop Riveter Spare Noze Piece (6.0mm) is a replacement nose piece designed for the TCRIV003 riveter, helping you set 6.0mm rivets more reliably with fewer slips and cleaner finished results.

Correct Rivet Guidance For Strong, Consistent 6.0mm Rivet Setting

Ideal for replacing a worn or damaged nose piece, or keeping a dedicated 6.0mm tip ready when switching between rivet sizes. Correct sizing helps prevent slippage and improves riveting efficiency—especially on heavier rivets.

Extra Information

Compatible with the Tork Craft TCRIV003 pop riveter for 6.0mm rivets.
Keep the nose piece clean—broken mandrel fragments and swarf can cause blockages and poor riveting performance.
If rivets still slip, inspect the jaws, spring and pulling mechanism for wear or contamination.

Pro Tip

With 6.0mm rivets, keep the riveter square to the work and apply steady pressure. A straight pull is kinder to the jaws and sets stronger rivets.

Features

6.0mm replacement nose piece Designed specifically for setting 6.0mm rivets on the TCRIV003 riveter.
Service-ready spare part Ideal when the original tip is worn, damaged, blocked or missing.
Improves rivet alignment Helps keep the rivet centred for smoother pulling and more consistent sets.

Benefits

More consistent rivet setting: Correct sizing helps reduce slipping and improves pull reliability.
Cleaner, stronger fastenings: Better alignment supports neat rivet heads and dependable joint strength.
Less downtime and frustration: A quick swap part that keeps heavier riveting jobs moving.

Safety

Wear eye protection during riveting—mandrels snap and small fragments can fly.
Keep fingers clear of pinch points and moving parts while operating the riveter.
Dispose of snapped mandrels safely—sharp ends can puncture skin or tyres.
Use the correct rivet size and nose piece to prevent tool damage and failed fastenings.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCRIV003-05
Product Type	Spare Part
Component	Spare Noze Piece
Size	6.0mm
Compatible Model	TCRIV003
Application	Pop Riveting / Rivet Tool Maintenance

Pop Riveter Sizes 2.4mm 3.2mm 4.0mm 4.8mm 1/4" Shank Fits All Drills

Model: TCRIV003 UPC: 6009515887742

Pop Riveter Sizes 2.4mm 3.2mm 4.0mm 4.8mm 1/4" Shank Fits All Drills

Tork Craft Drill Pop Riveter Sizes 2.4 mm / 3.2 mm / 4.0 mm / 4.8 mm – 8mm Hex Shank Multi-size blind riveter: Handles four of the most common pop-ri..

R 2,298.85

Ex VAT:R 1,999.00