Blade Tct Euro Tip 190 X 48t 20/16mm Profesional

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 6
Model: TCE19048
Weight: 0.54kg
Pack Dim: 240.00mm x 228.00mm x 10.00mm
UPC: 6009675084609

Price:

R 1,028.16

Ex VAT: R 894.05

Available Options

Stockist

Tork Craft Blade — TCT Euro Tip 190 × 48T (20/16 mm bore)

Size: 190 mm diameter [Bore options: 20 mm / 16 mm]

This 190 mm Tork Craft Euro-Tip circular saw blade features 48 precision carbide-tipped teeth and dual-bore compatibility (20 mm or 16 mm). It is designed for professional carpentry and trade use, offering robust performance in cutting timber, sheet goods, structural framing and composite materials.

Extra Information

Ideal for general wood and sheet materials — if ultra-fine finish is required (e.g., veneered plywood or laminate) consider a higher-tooth blade (60T+).
Always verify your saw supports a 190 mm blade diameter and the bore (20 mm or 16 mm) before mounting to avoid unsafe operation.
Maintain proper feed and prevent side pressure on the blade to prolong life and ensure clean cuts; regular maintenance of the blade and machine improves performance.

Pro Tip

When cutting sheet goods, use a backing board to reduce chip-out on the underside and enable the Euro-Tip design to perform cleanly.

Features

190 mm diameter — deeper cut capacity compared with standard smaller sizes.
48 teeth (48T) — balanced tooth count for good cut speed while maintaining acceptable finish on wood and boards.
Bore options 20 mm / 16 mm — accommodates machines with either arbor size, improving compatibility.
Euro-Tip tooth geometry — designed for efficient chip removal and clean cutting in wood and general-purpose materials.
Trade-grade brand: Tork Craft — designed for job-site durability and repeated use.

Benefits

Versatile use: Suitable for general wood-cutting tasks including framing, sheet-goods, composite boards and light structural timber.
Balanced finish and speed: With 48 teeth, it gives better edge quality than coarse-tooth blades but still maintains good cutting progress.
Machine compatibility: Dual bore size means fewer adapters required and greater flexibility across saws.
Trade robustness: Built for job-site conditions with durability in mind and reduced wear compared with consumer grade blades.

Safety

Wear eye, ear and dust protection when using this blade.
Ensure the blade’s maximum RPM rating matches the machine’s rated speed; do **not** exceed the blade’s specified maximum.
Allow the blade to reach full operating speed before entering the cut; feed steadily and avoid forcing or twisting the blade.
Inspect the blade before each use—look for chipped or missing teeth, warping or other damage; replace the blade if any defects are found.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCE19048
Blade Diameter	190 mm
Teeth Count	48 T
Bore (Arbor)	20 mm / 16 mm
Rim/Tooth Geometry	Euro-Tip TCT (Tungsten Carbide Tipped)
Suitable Materials	Timber, sheet-goods, composite boards, general-purpose wood cutting
Pack Quantity	1 blade