Annular Hole Cutter Hss 64 X 30mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 18
Model: TCAC064-1
Weight: 0.37kg
Pack Dim: 80.00mm x 72.00mm x 110.00mm
UPC: 6009515894962

Price:

R 2,603.16

Ex VAT: R 2,263.62

Available Options

Stockist

Tork Craft Annular Hole Cutter — HSS 64 × 30 mm, 19.05 mm (3/4") Weldon

Size: 64 mm x 30 mm [3/4" Weldon Shank]

This 64 mm diameter HSS annular cutter from Tork Craft is ideal for large-hole applications in steel and cast-iron where depth is limited. With a 30 mm cutting depth and a secure 19.05 mm (3/4″) Weldon shank, it delivers efficient, clean holes with less feed pressure and minimal burrs — perfect for structural, flange or pipe-clearance work.

Extra Information

Use with a magnetic-base drill or drill-press fitted with a 19.05 mm (3/4″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection — ensure correct size for your arbor.
When drilling stainless or harder materials, apply cutting fluid and maintain a steady feed to preserve cutter life and chip clearance.

Pro Tip

Ensure magnet base sits flush on a flat surface; begin at low RPM until nibbing occurs, then increase feed when consistent, curled chips appear. Clear chips often and re-lubricate to reduce heat and maintain finish and tool life even with large diameter cuts.

Features

64 mm diameter — for major clearance holes and structural penetrations.
30 mm cutting depth — shallow but large diameter, suitable for plate and structural sections.
19.05 mm (3/4") Weldon shank — two-flat drive ensures firm hold in magnetic drills.
HSS material — high-speed steel construction suitable for heavy-duty metal drilling.
Thin-wall, multi-flute design — enables faster penetration and efficient chip evacuation even in large sizes.

Benefits

Large-hole efficiency: removes just the periphery ring, making large diameters faster than conventional twist drills.
Smoother finish: fewer burrs and cleaner edges mean less finishing work.
Reduced operator load: even with large size, feed pressure remains manageable, especially with shallow depth.
Industrial durability: HSS body and Weldon interface deliver reliable performance under tough conditions.

Safety

Wear eye, ear and gloves protection; use cutting fluid to manage heat and improve chip removal.
Ensure the magnet or drill base is firmly secured and the workpiece is stable before drilling; use a tether when working overhead or on angled surfaces.
Do not use hammer or impact mode; maintain a steady feed and allow the slug to eject cleanly — stop immediately if feed slows or chatter begins.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC064-1
Product Type	Annular hole cutter (HSS)
Diameter	64 mm
Cutting Depth	30 mm
Shank	19.05 mm (3/4") Weldon, two-flat drive
Tip/Body Material	High-Speed Steel (HSS)
Suitable Materials	Mild & structural steel, cast-iron, shallow-depth large-diameter holes
Recommended Machine	Magnetic-base drill / drill-press with Weldon arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1