Annular Hole Cutter Tct 32 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 6
Model: TCAC032-4
UPC: 6009515895211

Price:

R 1,175.66

Ex VAT: R 1,022.31

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 55 × 35 mm, 19.05 mm (3/4") Weldon

Size: 55 mm x 35 mm [3/4" Weldon Shank]

The 55 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4″) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.

Extra Information

Use in a magnetic-base drill or drill press with a suitable Weldon-shank arbor.
A pilot pin is required for centring and slug ejection (sold separately).
Apply cutting fluid and steady feed, especially on stainless or harder grades.

Pro Tip

Seat the magnet on a clean, flat area. Start at low RPM, then increase feed until continuous chips form. On deeper cuts, pause to clear chips and re-lubricate to keep the cutter cool and the finish crisp.

Features

55 mm diameter — ideal for larger bolt clearances, bushings and conduit penetrations.
35 mm cutting depth — covers common plate thicknesses and stacked material.
19.05 mm (3/4") Weldon shank — reliable two-flat drive for mag drills.
TCT teeth — wear-resistant carbide tips for long life in steel and cast iron.
Thin-wall, multi-flute body — rapid penetration and efficient chip evacuation.

Benefits

High productivity — faster than twist drilling as only the periphery is cut.
Cleaner holes — reduced burrs minimize post-processing.
Lower effort — reduced feed pressure, helpful on vertical and overhead work.
Consistent accuracy — pilot-pin guided centring and controlled slug ejection.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
Ensure magnet adhesion and workpiece stability before drilling; tether the drill when working at height.
Do not use hammer action; keep a steady feed and allow the slug to eject.
Disconnect power before changing cutters or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC055-4
Product Type	Annular hole cutter (TCT)
Diameter	55 mm
Cutting Depth	35 mm
Shank	19.05 mm (3/4") Weldon, two-flat
Tip Material	Tungsten-carbide-tipped
Body	Alloy steel, thin-wall, multi-flute
Suitable Materials	Mild & structural steel, stainless (with coolant), cast iron
Recommended Machine	Magnetic-base drill / drill press with Weldon arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1