Polisher Service Kit Gear Box Head Cobver (4/6/15/16) For Pol05

Extra Information

Signs that the gear box head cover components may need attention include visible cracks on the front housing, stripped or missing screws, grease weeping from the front joint face, or a gear head that flexes when you apply pressure on the pad. If the polisher has been dropped on its nose or run with failed bearings, the head cover and related pieces can be stressed beyond what a simple screw tightening will fix.

The POL05-SK03 kit is designed specifically for the Tork Craft POL05, so screw positions, bearing pockets and sealing surfaces all line up with the original gear box body. Fitting genuine head cover components, together with fresh grease and healthy bearings, brings the front of the machine back to factory-style tightness and reliability for daily work in panel shops and detailing bays.

Pro Tip

Pro Tip: When rebuilding the front gear head with the POL05-SK03 kit, mark the original position of components and take photos as you strip the old cover off. Clean away all old grease, compound dust and gasket material from the mating faces, then apply fresh suitable grease and tighten the cover screws evenly in a criss-cross pattern. Spin the spindle by hand before powering up – it should feel smooth and free of tight spots before you test the polisher under no load.

Features

• Genuine Tork Craft gear box head cover component kit for the POL05 polisher.
• Covers head cover and associated components listed as items 4, 6, 15 and 16.
• Accurately formed front cover to support bearings and seal the gear box.
• Matched hardware and components to clamp and locate the cover correctly.
• Designed to handle daily workshop use, heat and vibration.
• Direct replacement for the original POL05 gear head cover parts.

Benefits

• Restores a solid, play-free front gear head on the POL05.
• Helps contain grease and reduce the risk of leaks around the front housing.
• Improves bearing support and gear alignment at the nose of the tool.
• Reduces vibration and noise caused by distorted or damaged head covers.
• Improves overall feel and control of the polisher on paint, gelcoat and metal.
• Extends the service life of the machine instead of replacing the complete tool.

Safety

• Always unplug the polisher from the mains before opening the gear box or removing the head cover.
• Allow the tool to cool down fully before handling internal gears, bearings and housings.
• Ensure all internal components are correctly seated before fitting and tightening the new head cover.
• Use the correct screws supplied for the cover – do not substitute with over-long or incorrect fasteners.
• After reassembly, test the POL05 under no load and listen for a smooth, even gear note before returning it to normal use.
• If you are unsure about mechanical repairs, have the work carried out by a qualified technician or an approved service centre.

Specifications