Polisher Service Kit Gear Box Housing & Screws (14/20) For Pol05

Extra Information

Signs that the gear box housing needs attention include visible cracks, stripped screw holes, oil or grease leaks around the head, or a gear box that flexes when you apply pressure during polishing. In some cases a failed bearing or heavy impact can damage the housing itself – fitting only new internal parts will not fix the underlying problem if the outer shell is no longer true.

The POL05-SK02 kit is built specifically for the Tork Craft POL05, so screw positions, bearing pockets and sealing faces all match the original design. Using a genuine housing and screw set helps the drive system run as intended and keeps the head looking neat and professional in front of customers.

Pro Tip

Pro Tip: When transferring the gears and bearings into the new POL05-SK02 housing, clean away all old grease and debris first and inspect each component as you go. Apply fresh, suitable grease to the gears and bearing seats, tighten the new screws evenly in stages and spin the spindle by hand before powering up – it should feel smooth, with no tight spots or scraping, before you test the polisher under no load.

Features

• Genuine Tork Craft gear box housing and screw set for the POL05 polisher.
• Replaces key head components listed as items 14 and 20 on the parts diagram.
• Accurately machined housing to support gears and bearings in the correct position.
• Correct OEM screws to clamp the housing halves securely together.
• Designed to handle workshop knocks, heat and daily polishing loads.
• Direct bolt-on replacement for the original POL05 gear head housing.

Benefits

• Restores a solid, play-free gear head with proper support for the drive train.
• Reduces unusual noises and vibration caused by distorted or loose housings.
• Helps contain grease and keep dust and compound out of the gears.
• Protects bearings, gears and shafts from misalignment and premature wear.
• Improves overall feel and control of the POL05 during demanding work.
• Extends the life of the polisher instead of replacing the whole machine.

Safety

• Always unplug the polisher from the mains before opening the gear box or working on internal components.
• Allow the tool to cool down fully before handling gears, bearings and housings.
• Ensure all internal parts are correctly seated in the new housing before tightening screws.
• Use the correct length screws from the POL05-SK02 kit – do not mix with incorrect fasteners.
• After reassembly, test the POL05 under no load and listen for a smooth, even gear note before returning it to normal use.
• If you are unsure about mechanical repairs, have the work carried out by a qualified technician or an approved service centre.

Specifications