Annular Hole Cutter Tct 75 X 55mm Weld Shank 31.75mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC075-4
Weight: 0.72kg
Pack Dim: 105.00mm x 95.00mm x 135.00mm
UPC: 6009515895259

Price:

R 3,339.03

Ex VAT: R 2,903.50

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 75 × 55 mm, 31.75 mm (1¼″) Weldon

Size: 75 mm x 55 mm [1¼″ Weldon Shank]

This 75 mm diameter TCT annular cutter from Tork Craft is designed for large-hole applications where speed and precision matter. With a 55 mm cutting depth and a 31.75 mm (1¼″) Weldon shank, it delivers fast, clean broaches with minimal burrs and reduced feed force — ideal for flanges, pipe clearances or heavy structural penetration work.

Extra Information

Designed for use in magnetic-base drills or drill-press setups with a 31.75 mm (1¼″) Weldon-shank arbor.
A pilot pin (sold separately) is required for centring the cutter and slug ejection — check your arbor/pin match.
For stainless steel or harder materials, apply suitable cutting fluid and maintain steady feed to preserve carbide-tips and ensure efficient chip evacuation.

Pro Tip

Ensure the magnet base is clean and perfectly flat on the workpiece. Start the cutter at low RPM until it bites, then increase feed once consistent curl chips appear. For large-diameter shallow cuts, clearing chips between holes and re-lubrication will improve finish and extend cutter life.

Features

75 mm diameter — for major clearance holes, pipe passages or large fixings.
55 mm cutting depth — shallow depth but large diameter, suited for structural plate or sheetwork.
31.75 mm (1¼″) Weldon shank — two-flat drive ensures secure clamp in magnetic-base drills or arbors.
TCT (tungsten-carbide-tipped) teeth — long-life cutting edge for steel and cast-iron applications.
Thin-wall, multi-flute body — faster penetration and efficient chip removal in large-diameter cuts.

Benefits

High productivity: Large-diameter hole achieved faster by removing only the periphery instead of full core.
Cleaner finish: Reduced burrs and better hole edge means less rework.
Lower feed force: Even with 75 mm diameter the shallow depth helps keep feed pressure manageable.
Industrial durability: TCT tips and heavy-duty Weldon shank give reliable performance in steel/structural work.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to manage heat and assist chip removal.
Ensure magnet or base clamp is firmly secured and the workpiece is stable; for overhead or angled work use a tether.
Do not use hammer or impact mode; maintain straight feed and allow slug ejection — if the feed slows or chatter starts, stop and clear chips.
Disconnect power or disable magnet before changing cutters or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	137(L)mm x Ø105mm
Package Weight	724g
Product Dimensions	100(L)mm x Ø75mm
Product Weight	652g
Material	TCT
Finish	Polished
Size	Ø75mm
Cutting Depth	55mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT