Annular Hole Cutter Tct 30 X 35mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCAC030-3
Weight: 0.14kg
Pack Dim: 125.00mm x 50.00mm x 45.00mm
UPC: 6009515895181

Price:

R 864.23

Ex VAT: R 751.50

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 30 × 35 mm, 19.05 mm (3/4") Weldon

Size: 30 mm x 35 mm [3/4" Weldon Shank]

The 30 mm diameter TCT annular cutter from Tork Craft is engineered to deliver high-efficiency holes in structural steel, plate and cast-iron. With a 35 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it creates clean, burr-reduced holes with less feed force — ideal for repetitive industrial drilling.

Extra Information

Use in a magnetic-base drill or drill press with compatible Weldon shank arbor.
A pilot pin (sold separately) is required for centring and ejection of the slug.
When drilling stainless steel or harder-grade materials, apply suitable cutting fluid and maintain steady feed to protect carbide tips and maintain chip-clearance.

Pro Tip

Ensure the magnet sits flat and clean on the workpiece. Start at low speed, then increase feed once consistent curly chips form. On deeper cuts, pause to clear chips and re-lubricate to avoid heat build-up and preserve finish and tool life.

Features

30 mm diameter — for larger bolt clearances and conduit penetrations.
35 mm cutting depth — accommodates thicker materials and stacked plate.
19.05 mm (3/4") Weldon shank — two-flat drive for reliable fit in magnetic drills.
TCT (tungsten-carbide-tipped) teeth — long life and sustained cutting speed in steel and cast-iron.
Thin-wall, multi-flute body — faster penetration, efficient chip evacuation and lower heat build-up.

Benefits

Faster hole making: removes only the peripheral ring of material, making the cut quicker vs a twist bit.
Cleaner finish: fewer burrs and smoother edges — less post-drill cleanup.
Extended tool life: carbide tips maintain sharpness even in tough materials.
Lower operator fatigue: reduced feed pressure, beneficial for vertical or overhead operations.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and aid chip removal.
Ensure the magnet or work clamp is firmly secured and the workpiece stable before drilling; tether the drill when working at height or on angled surfaces.
Do not use hammer or impact mode; maintain a smooth feed and allow the slug to eject naturally — if feed slows or chatter occurs, stop and clear chips immediately.
Disconnect power or disable the magnet before changing cutters, shanks or pilot pins.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	118(L)mm x Ø49mm
Package Weight	143g
Product Dimensions	75(L)mm x Ø30mm
Product Weight	122g
Material	TCT
Finish	Polished
Size	Ø30mm
Cutting Depth	35mm
Shank	3/4" (19.05mm) Weldon shank
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0005-01: Ø12 - 17 x 55mm
	TCAC0005-02: Ø18 - 102 x 35mm
	TCAC0005-03: Ø12 - 17 x 35mm
	TCAC0005-04: Ø18 - 102 x 55mm
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter TCT