Annular Hole Cutter Tct 70 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 12
Model: TCAC070-4
Weight: 0.67kg
Pack Dim: 105.00mm x 95.00mm x 135.00mm
UPC: 6009515895235

Price:

R 2,859.43

Ex VAT: R 2,486.46

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 70 × 55 mm, 19.05 mm (3/4") Weldon

Size: 70 mm x 55 mm [3/4" Weldon Shank]

This 70 mm diameter TCT annular cutter from Tork Craft is designed for large-clearance holes when only moderate depth is required. With a 55 mm cutting depth and a 19.05 mm (3/4″) Weldon shank, it delivers fast, clean holes with minimal burrs and feed effort—perfect for flange penetrations, pipe fits and structural work.

Extra Information

Use with a magnetic-base drill or drill-press fitted with a 19.05 mm (3/4″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring and slug ejection—check compatibility for your arbor and material thickness.
When drilling stainless steel or harder grades, apply appropriate cutting fluid and maintain steady feed to protect the cutter and ensure chip clearance.

Pro Tip

Ensure the magnet base is clean and flat before clamping. Start at low RPM until the cutter bites, then increase feed once you see consistent curled chips. For deeper large-diameter cuts, pause to clear chips and re-lubricate to avoid heat build-up and prolong cutter life.

Features

70 mm diameter — for major clearance holes and large-structure penetrations.
55 mm cutting depth — shallow depth for large diameter, plate or structural sections.
19.05 mm (3/4") Weldon shank — two-flat drive for a secure grip in magnetic drills.
TCT (tungsten-carbide-tipped) teeth — long-life and high-performance in steel and cast-iron applications.
Thin-wall, multi-flute design — enables faster penetration and efficient chip ejection even in large diameters.

Benefits

Large-hole speed: by removing just the periphery, it creates bigger holes faster than twist drills.
Cleaner finish: fewer burrs mean less cleanup and better fit-up.
Reduced operator effort: even with large size, the shallow depth keeps feed manageable for vertical or overhead jobs.
Industrial durability: TCT tips with Weldon interface give reliable performance under tough conditions.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to control heat and aid chip removal.
Ensure magnet base or clamp is firmly secured and workpiece stable; use a tether when working overhead or on angled setups.
Do not use hammer/impact mode; keep steady feed and allow slug to eject cleanly—if feed slows or chatter appears, stop immediately and clear chips.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC070-4
Product Type	Annular hole cutter (TCT)
Diameter	70 mm
Cutting Depth	55 mm
Shank	19.05 mm (3/4") Weldon, two-flat drive
Tip Material	Tungsten-carbide-tipped
Suitable Materials	Mild & structural steel, cast-iron, large diameter holes
Recommended Machine	Magnetic-base drill / drill-press with Weldon arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1