Nutsetter Magnetic 17x65mm Carded

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: T NS17065C
Weight: 0.09kg
Pack Dim: 150.00mm x 67.00mm x 28.00mm
UPC: 6009515886844

Price:

R 161.00

Ex VAT: R 140.00

Available Options

Stockist

Tork Craft Magnetic Nutsetter — 17 mm × 65 mm (Model T NS17065B)

Carded (display)

The Tork Craft T NS17065B is a magnetic nutsetter built for rapid screwdriving tasks. With a 17 mm hex socket and 65 mm shaft length, it’s specially suited for sheet-metal and fastener driving roles. The magnetic tip holds screws securely during positioning, reducing drop-outs and improving speed on the job.

Extra Information

Best used with a drill or driver fitted with 17 mm hex-head screw fasteners in sheet-metal, fixture or bracket applications.
Ensure the bit is fully seated into the hex head before applying torque to prevent damage or rounding.
Store in a clean, dry kit; magnetic tips attract metal filings which can reduce effectiveness over time.

Pro Tip

Keep this nutsetter labelled “17 mm × 65 mm Mag” in your bit organiser to avoid mix-ups with shorter or non-magnetic versions.
For overhead screwdriving, hold the screw against the magnet tip, raise the driver vertically, then drive — fewer drops and mis-feeds.

Features

17 mm hex socket size — compatible with standard 17 mm hex head screws and fasteners.
65 mm overall length — gives enough reach and clearance for screw-driving into panels and brackets.
Magnetic tip retention — holds sheet-metal screws securely for easier alignment and driving.
Six-point socket design — better grip on fasteners, reducing rounding and slip-out.
Carded packaging — suited for display.

Benefits

Faster operations: The magnetic tip means you spend less time dropping screws and realigning them.
Better control: Six-point hex socket ensures proper engagement and minimises wear on fasteners.
Good reach: The 65 mm length gives access to screws in recesses and behind panels.

Safety

Disconnect the driver or tool before fitting or removing the nutsetter.
Ensure the fastener is properly aligned and seated before applying torque.
Wear eye protection when driving screws — chips may eject especially in metal panels.
Replace the nutsetter if the socket becomes rounded or the magnet weakens — worn tools increase fastener damage risk.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	T NS17065B
Product Type	Magnetic Nutsetter
Hex Size	17 mm
Length	65 mm
Socket Profile	Six-point
Tip Retention	Magnetic
Packaging	Carded
Typical Use	Sheet-metal screws, bracket fasteners, driver-bits