Rot. Hammer 800w 220v 2.8j Sds-plus 4 Func 5500 Ipm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 206
Model: TCRH0800
Weight: 5.34kg
Pack Dim: 450.00mm x 116.00mm x 290.00mm
UPC: 6009515882853

Price:

R 1,980.00

Ex VAT: R 1,721.74

Available Options

Stockist

TorkCraft - Rotary Hammer 800W

Rated Speed: 0-1200 RPM
Voltage: 230V

Application:

Drilling into various masonry materials using various masonry drill bits.
Chiselling various masonry materials using various chiselling points.

Installing chisel bits and drill bits

For assembly, pull back the fastening sleeve and hold. Push and rotate the dust-free accessory into the tool holder as far as it will go. The tool will lock automatically. Check that it has locked by pulling the tool.
To remove the SDS accessory, pull back the fastening sleeve and remove the accessory.

Depth guide

Insert the required drill bit. Fit the depth stop into the hole of the auxiliary handle and set the required depth.

Rotation setting

R-BOTTOM (Forward) = To select reverse rotation, push the lever down on the top side of the handle.
L-TOP (Reverse) = to select forward rotation, release the on/off switch and push the lever up on the top side of the handle.

Fitting the auxiliary handle

Loosen the auxiliary handle by unscrewing it. Slide the auxiliary handle clamp over the collar behind the bit holder. Rotate the side handle to the desired position and tighten the handle.

WARNING: Never lay the drill down before the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power
tool out of your control or potentially damage the tool and work surface.
Regularly clean the hammer drill air vents, by using an air duster.

Specifications

Description	Specifications
Packaging Type	Blow mould case and color cardboard box
Packaging Dimensions	402(L) x 292(H) x 115mm(T)
Packaging Weight	5.25 kg
Tool Dimensions	350 x 205 x 82mm
Weight of the Tool	3 kg
Material	Body and handle: Plastic
Finish	Grey plastic with red and black accents
Content	Auxiliary handle Depth Rod Flat chisel Point chisel Ø 8mm SDS drill bit Ø 10mm SDS drill bit Ø 12mm SDS drill bit
Specifications	Max RPM: 0-1200 RPM Chuck type: SDS PLUS Wattage: 800W Impact energy: 2.8 J Drilling Capacity: Wood - 30mm, Steel - 13mm, Concrete - 26mm Max Impact rate: 0- 5500 IPM Motor: Brushed Voltage: 230V