Blade Tct 250 X 80t 30/1/20/1 General Purpose Cross Cut Smooth

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TCD25080
Weight: 0.80kg
Pack Dim: 280.00mm x 250.00mm x 3.00mm
UPC: 6009675083510

Price:

R 400.20

Ex VAT: R 348.00

Available Options

Stockist

Tork Craft TCT Circular Saw Blade — 250 × 80T × 30/20 mm (General-Purpose Cross-Cut Smooth)

Size: 250 mm diameter × 80 teeth [Bore: 30/20 mm]

When finish quality is non-negotiable, this 250 mm Tork Craft blade with 80 tungsten-carbide tipped teeth delivers crisp, clean cross-cuts. The high tooth count and precision-balanced plate produce chip-reduced edges on hardwood, plywood, MDF and laminates with minimal sanding required.

Extra Information

Optimised for cross-cutting and trimming; use a rip blade for heavy ripping tasks.
Support thin sheet goods on both sides to minimise underside breakout.
Keep the blade free of resin/pitch build-up to preserve cut quality.

Pro Tip

For laminates and veneered plywood, score 1–2 mm on the first pass, then complete the cut—this two-pass method further reduces chipping.

Features

250 mm diameter — generous capacity for boards and sheet goods.
80-tooth fine-cut geometry — prioritises smooth, splinter-reduced finishes.
30 mm bore (reducer to 20 mm) — flexible fit across common arbor sizes.
TCT teeth — tungsten-carbide tips for long-lasting sharpness and consistency.
Precision-balanced plate to minimise vibration and improve cut accuracy.

Benefits

Superior finish: High tooth count leaves cleaner edges and reduces sanding time.
Less tear-out: Ideal for veneered panels, laminates and delicate surfaces.
Durable performance: Carbide tips maintain edge retention over extended use.
Versatile fit: 30/20 mm bore options suit a range of saws.

Safety

Wear eye, ear and dust protection when cutting.
Verify blade diameter and bore match your saw; disconnect power before fitting.
Allow the saw to reach full speed before entering the cut; feed steadily without forcing.
Inspect for chipped teeth or warped plate before each use; replace if damaged.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCD25080
Product Type	TCT Circular Saw Blade — Fine Cross-Cut (Smooth)
Diameter	250 mm
Tooth Count	80T
Bore (Arbor)	30 / 20 mm
Tip Material	Tungsten-Carbide Tipped (TCT)
Pack Quantity	1
Suitable Materials	Plywood, MDF, Laminates, Hardwood, Veneers
Tool Compatibility	Circular/bench saws with 250 mm blade capacity and 30 mm arbor (20 mm with reducer)